Arebos Cric hydraulique 3 t avec Hauteur de Levage 85-500 mm | Grande Bride de Fixation
Model Number: AR-HE-HRW3T
AREBOS Hydraulic Floor Jack 3T User Manual
Welcome to the AREBOS Hydraulic Floor Jack 3T user manual. This
manual will guide you through the proper setup, use, and
maintenance of your new jack. Please read all instructions
carefully to ensure safe and effective operation.
- Always ensure that the vehicle is parked on a firm, level
surface before lifting.
- Never exceed the rated capacity of 3 tonnes.
- Use wheel chocks to prevent the vehicle from rolling.
- Never go under a vehicle that is supported only by a jack.
Always use appropriate jack stands.
- Keep hands and feet away from the lifting mechanism while the
jack is in use.
|72 x 41.5 x 170 cm
|85 to 500 mm
- Attach the wheels to the base of the jack using the provided
circlips. You may need circlip pliers for this step (not
- Insert the handle into the jack's socket and secure it. The
handle comes in two parts that need to be assembled together.
- Place the rubber pads onto the lifting saddle to protect the
- Position the jack under the vehicle's designated lift
- Ensure the saddle (with rubber pad) is correctly aligned with
the lift point.
- Pump the handle to raise the vehicle to the desired
- Once lifted, immediately place appropriate jack stands under
the vehicle before performing any work.
- To lower the vehicle, slowly turn the release valve
counterclockwise using the jack handle.
- Regularly check for any hydraulic oil leaks.
- Keep the jack clean and free of dirt and grease.
- Store in a dry, covered area to prevent rust.
- Jack Will Not Lift: Ensure the release valve
is fully closed by turning it clockwise. Check for adequate
hydraulic fluid levels.
- Jack Lowers Too Quickly: Turn the release
valve more slowly or check for damage to the valve.
- Jack Is Leaking Oil: Tighten any loose
fittings and ensure seals are not damaged. If leaking persists,
contact the manufacturer for service.
Frequently Asked Questions (FAQs)
What is the minimum clearance required for this jack?
The minimum clearance required is 85 mm, making it suitable for
low-profile vehicles such as sports cars.
Is the jack easy to maneuver?
Yes, the jack is equipped with wheels for easy positioning, and
the long handle provides leverage for effortless lifting.
Does this jack come with a warranty?
Yes, the AREBOS Hydraulic Floor Jack 3T comes with a 2-year
Are the rubber pads included?
Yes, three robust rubber pads are included to protect your
vehicle during lifting.
Can this jack be used for SUVs?
Yes, as long as the SUV does not exceed the 3-tonne weight
capacity, this jack can be used to lift it.
What should I do if I receive the jack in more than one
It is normal for the jack to be shipped in two separate
packages. If you do not receive all packages, please contact the
seller for assistance.
Does the jack come fully assembled?
No, you will need to attach the wheels and assemble the handle.
A circlip plier is required for the wheels and is not included.
How do I know if the jack is suitable for my vehicle?
Ensure that your vehicle's weight is within the 3-tonne capacity
and that the lift points are within the jack's range of 85 to 500
What should I do if I find a part missing?
Contact the seller immediately to report the missing part and
arrange for a replacement or solution.
The AREBOS Hydraulic Floor Jack 3T is designed for durability
and ease of use. By following these instructions and tips, you can
safely and effectively use your jack for vehicle maintenance and
repairs. Remember to always observe safety precautions and perform
regular maintenance to ensure the longevity and reliability of your
Q: What is the weight capacity of the Arebos hydraulic jack?
A: The Arebos hydraulic jack has a weight capacity of 3 tons.
Q: What is the height range for lifting with this jack?
A: The Arebos hydraulic jack has a lifting height range of 85 to
Q: Does this jack come with rubber pads?
A: Yes, the Arebos hydraulic jack comes with 3 sturdy rubber pads.
Two of them are 6 mm thick and 110 mm wide, providing safe and
Q: Is this jack suitable for low-slung vehicles?
A: Yes, the Arebos hydraulic jack is a favorite among sports car
drivers because of its low lifting height of 85 mm, allowing it to
fit under any lowered vehicle.
Q: Does this jack have a magnetic work surface?
A: Yes, the Arebos hydraulic jack has a magnetic work surface that
prevents the unintentional repositioning of screws and other
mounting materials, keeping everything within reach.
Q: What are the dimensions and weight of this jack?
A: The dimensions of the Arebos hydraulic jack are 72 x 41.5 x 170
cm (L x W x H), and it weighs 34.2 kilograms.
Q: What is the manufacturer of this jack?
A: The Arebos hydraulic jack is manufactured by Canbolat Vertriebs
Q: What is the average customer rating for this product?
A: The average customer rating for the Arebos hydraulic jack is 4.4
out of 5 stars, based on 1,189 ratings.
Q: Is this jack available on Amazon?
A: Yes, the Arebos hydraulic jack is available on Amazon.fr. Its
ASIN is B07Z3LS6S6.
Q: When was this product first listed on Amazon.fr?
A: This product was first listed on Amazon.fr on March 31, 2019.
|Auto et Moto > Outils et dépannage > Équipements garage et atelier > Élévateurs, grues d'atelier et crics > Crics de levage
|Canbolat Vertriebs GmbH
|Poids de l'article
|Dimensions du produit (L x l x h)
|72 x 41,5 x 170 cm; 34,2 kilogrammes
|Numéro du modèle de l'article
|Numéro de série fabricant
|Moyenne des commentaires client
|4,4 4,4 sur 5 étoiles 1 189 évaluations 4,4 sur 5 étoiles
|Classement des meilleures ventes d'Amazon
|567 en Auto et Moto (Voir les 100 premiers en Auto et Moto) 4 en Crics de levage
|Date de mise en ligne sur Amazon.fr
|31 mars 2019
|Dimensions de l'article L x l x H
|72 x 41,5 x 170 centimètres
|72 x 41,5 x 170 cm; 34,2 kilogrammes
|31 mars 2019
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.