MYNT3D Super 3D Pen User Manual

Getting Started

• Unpack your MYNT3D Super 3D Pen and ensure the kit includes 3 colors of PLA plastic filament, A/C adapter, and the 3D pen itself.
• Plug the A/C adapter into a suitable outlet and connect it to the 3D pen.
• Turn on the pen by pressing the power button. The LED indicator will light up to show that the pen is on.

Loading Filament

1. Choose the ABS or PLA filament provided in the kit or any other compatible 1.75mm filament.
2. Cut the end of the filament straight across to ensure proper loading.
3. Insert the filament into the feeding hole at the top of the pen.
4. Press and hold the load button until the filament is gripped by the pen's internal motor and starts to feed through.
5. Wait for the filament to melt and start extruding from the nozzle before beginning to draw.

Using the 3D Pen

• Use the stepless speed slider to adjust the flow speed to your preference.
• Move the pen over the surface where you want to create your 3D drawing, allowing the melted filament to extrude and solidify, forming your design.
• To stop extruding filament, release the load button.

Maintenance

• Always keep the tip of the pen clean to prevent blockages.
• After use, unload the filament and allow the pen to cool down before storing it.

Troubleshooting Tips

• If the pen is not turning on, ensure that it is properly plugged in and the power outlet is functioning.
• If the filament is not loading, make sure it has been cut straight and is being inserted correctly.
• In case of clogging, refer to the manual for instructions on how to clean the nozzle, or contact MYNT3D support for assistance.
• If the temperature needs adjusting, use the included micro screwdrivers to access the control panel. However, this should rarely be necessary as the pen is preset for optimal temperature.

Frequently Asked Questions (FAQ)

What materials can I use with the MYNT3D Super 3D Pen?

The pen is compatible with 1.75mm ABS and PLA filaments.

How do I prevent the pen from clogging?

Ensure that you're using the correct filament and that it's cut straight before loading. Regular maintenance and cleaning after use will also help prevent clogging.

Can my child use the MYNT3D Super 3D Pen?

Yes, the pen is suitable for children under adult supervision, especially due to the hot tip.

What do I do if my pen stops working?

Contact MYNT3D customer service. They are known for their responsive support and may replace the pen if it's within the warranty period.

How do I adjust the temperature?

The temperature control is behind a panel on the pen. Use the included micro screwdrivers to adjust the temperature dial, though this is typically not necessary for general use.

Where can I find a replacement A/C adapter?

If you lose the A/C adapter, contact MYNT3D customer service for assistance in obtaining a replacement.

FAQ [continued]

**MYNT3D Super 3D Pen FAQ**

**1. What materials are compatible with the MYNT3D Super 3D Pen?**
The MYNT3D Super 3D Pen is compatible with 1.75mm ABS and PLA plastic filament.

**2. How can I control the flow of material while using the 3D pen?**
The stepless speed slider on the pen allows you to regulate the flow for optimal control of the material as you draw.

**3. Is the nozzle of the pen prone to clogging?**
The ultrasonic sealed nozzle of the Super 3D Pen is nearly clog-proof, providing market-leading durability.

**4. Who can benefit from using the MYNT3D Super 3D Pen?**
The Super 3D Printing Pen is suitable for kids, artists, and engineers of all ages.

**5. What is included in the kit when purchasing the MYNT3D Super 3D Pen?**
The kit includes 3 colors of PLA plastic filament, an A/C adapter, and a slim, ergonomic touch pen with a 1-year limited warranty.

**6. Can I use other brands of filament with this 3D pen?**
Yes, you can use any brand of PLA plastic filament that is compatible with a 1.75mm diameter in the MYNT3D Super 3D Pen.

**7. How do I adjust the temperature settings of the pen?**
The temperature control for different filaments is accessed by removing a panel with included micro screwdrivers and adjusting a dial behind it.

**8. Is parental supervision required when children are using this pen?**
Parental supervision is recommended due to the tip of the pen getting hot during operation.

**9. Does the company provide good customer service and support?**
Customers have reported positive experiences with the company standing by its product and promptly replacing faulty pens.

**10. Where is the MYNT3D Super 3D Pen manufactured?**
The MYNT3D Super 3D Pen is manufactured in China.

These FAQs should provide you with useful information about the MYNT3D Super 3D Pen and help address common queries users may have about this product.

Specifications

Brand	MYNT3D
Model Number	Super 3D Pen
Category	Industrial & Scientific > Additive Manufacturing Products > 3D Printing Pens
Product Dimensions	3.98 x 8.31 x 2.32 inches; 7.76 ounces
Item model number	Super 3D Pen
Date First Available	November 16, 2019
Material	ABS
Color	Black
Product Dimensions	3.98"D x 8.31"W x 2.32"H
Item Weight	0.22 Kilograms
Weight	0.22 Kilograms
Dimensions	3.98"D x 8.31"W x 2.32"H
First Available	November 16, 2019