Enclave CineHome PRO - 5.1 Wireless Home Theater Surround Sound System User Manual

Table of Contents

1. Package Contents
2. Speaker Placement
3. System Setup
4. Connecting to Your TV
5. Using the Enclave App
6. Troubleshooting Tips
7. FAQs

1. Package Contents

• Enclave CineHub wireless transmitter
• 5 wireless active speakers powered by custom-tuned Class-D amplifiers
• 10-inch wireless subwoofer
• HDMI cable
• Power cords
• Quick start guide
• Remote control
• White gloves

2. Speaker Placement

Place the speakers in their respective positions in your room:

• Front Left and Front Right speakers: Place these speakers on either side of your TV with a slight angle facing towards your seating area.
• Center speaker: Place this speaker directly above or below your TV.
• Rear Left and Rear Right speakers: Place these speakers behind your seating area, facing towards the front of the room. Ideally, they should be at the same height as your ears when seated.
• Subwoofer: Place the subwoofer in the front of the room, ideally in a corner for the best bass response.

3. System Setup

1. Plug in each speaker and ensure their LED lights are flashing.
2. Connect the CineHub to a power source.
3. Wait for the CineHub's LED light to flash, indicating it is gathering information about the other speakers.
4. Once the LED light on the CineHub stops flashing, proceed to the next step.

4. Connecting to Your TV

1. Connect the provided HDMI cable to the ARC port on your TV (usually HDMI 2 for LG TVs).
2. Ensure the sound output on your TV is set to HDMI ARC.
3. Turn on your TV and the Enclave system should automatically turn on as well.
4. Adjust the volume using your TV or streaming device remote when connected via HDMI ARC.

5. Using the Enclave App

1. Download the Enclave App on your smartphone.
2. Connect your smartphone to the CineHub via Bluetooth.
3. Use the app to adjust speaker volume, input source, and advanced settings.
4. Measure the distance from each speaker to your seating area and enter the information in the app to configure THX settings.

6. Troubleshooting Tips

• If the LED light on the CineHub is not flashing, unplug it and plug it back in. Wait for the LED light to flash before proceeding with the setup.
• If the Enclave App cannot find the system, ensure the CineHub's LED light is on. If not, press the POWER button in the app to turn it on.
• For the best audio experience, avoid using an optical cable or Bluetooth connection to your TV, as these methods may limit volume control and surround sound capabilities.
• Consider connecting the system to a UPS to prevent power outages from causing setup issues.

7. FAQs

Q: Can I connect the Enclave system to my TV using an optical cable or Bluetooth?

A: While it is possible to connect the system to your TV using an optical cable or Bluetooth, it is not recommended. Using an optical cable will require you to adjust the volume using the Enclave App, and Bluetooth will only provide stereo sound, not 5.1 surround sound.

Q: Can I use my TV remote to control the Enclave system?

A: Yes, when connected via HDMI ARC, you can use your TV remote or streaming device remote to control the volume of the Enclave system.

Q: How do I configure the THX settings for my Enclave system?

A: Measure the distance from each speaker to your seating area and enter the information in the Enclave App to configure the THX settings for optimal audio performance.

Q: What should I do if the LED light on the CineHub is not flashing during setup?

A: Unplug the CineHub and plug it back in. Wait for the LED light to flash before proceeding with the setup process.

Q: How long are the power cords?
A: The power cords are pretty long, but they differ in length. The ones in the back are longer. Also, the cords are set up to be flush against the wall now.

Q: What happens if the app stops working? I mean, if it is no longer available or supported?
A: It is unlikely that the app will stop working, but if it does, the system comes with a remote that can be used instead. However, the app is mandatory for set up.

Q: Will this system support Dolby Atmos?
A: No, this system does not support Dolby Atmos.

Q: Does the Pro include a DVD player, or must I supply my own?
A: The system only includes speakers and a CineHub transmitter. It does not include any other components such as a DVD player.

Q: Can you add a self-powered Klipsch subwoofer?
A: No, you cannot add a self-powered Klipsch subwoofer to this system. It only works with its own subwoofer.

Q: Do these come in the color "Imperial Violet"?
A: No, they only come in black.

Q: How much do the satellite speakers weigh?
A: The satellite speakers weigh no more than 10 to 12 pounds each.

Q: Can you add a Klipsch subwoofer to this system?
A: No, this system only works with its own subwoofer. However, you can have up to four of them!

Q: Does the back panel have multiple HDMI inputs for components like Roku and Xbox? A picture would be helpful.
A: No, there is only one HDMI input on the back panel.