Product Overview

The PURPLE LEAF Offset Umbrella Base is designed to provide a sturdy foundation for your PURPLE LEAF cantilever patio umbrella. This base is compatible with 9 feet square, 10 feet square, 10 feet round, and 11 feet round umbrellas from PURPLE LEAF. The base is made from hard, weather-resistant PP plastic and features a 3D surface design.

Dimensions and Specifications

• Size: 32.3 x 32.3 x 8 inches
• Weight: 1 pound (before filling)
• Material: PP plastic
• Fill Capacity: Approximately 220lb when fully filled with water or sand

Assembly and Setup Instructions

1. Place the base in the desired location for your umbrella.
2. Before filling, ensure the side ports are tightly closed to prevent leaks. Use a large coin or similar tool to tighten the valves clockwise if necessary.
3. Fill the two compartments with water or sand through the openings on the top. If using sand, you may need a funnel to facilitate the process.
4. Once filled, mount the PURPLE LEAF cantilever umbrella onto the stand. This step may require two people for safe and proper handling.
5. Ensure the umbrella is securely attached to the base before use.

Troubleshooting Tips

• If the base is leaking water, ensure the side valves are tightened securely.
• If the base feels flimsy or flexes when standing on it, check to ensure it is evenly filled and the surface it is placed on is level.
• For issues with the umbrella not fitting the base correctly, confirm that you have the correct model of PURPLE LEAF umbrella that is compatible with the base.
• If the base is difficult to move once filled, consider emptying the contents before attempting to relocate it, especially if filled with sand.

Frequently Asked Questions (FAQs)

Can I use this base with umbrellas from other brands?

This base is specifically designed for PURPLE LEAF offset patio umbrellas and may not be suitable for other brands.

What should I do if my base has a small leak?

Check and tighten the side valves. If the issue persists, contact PURPLE LEAF customer support for assistance.

How do I store the base during winter?

If you filled the base with water, drain it completely before storing. If filled with sand, consider leaving it in place or emptying the sand if relocation is necessary.

What's the best way to fill the base with sand?

Using a funnel will make the process easier. Be prepared for it to take some time as the opening is designed to prevent spillage.

Can I get a replacement for parts that have worn out?

For replacement parts, contact PURPLE LEAF customer service directly with your request.

How do I ensure the base is stable?

Make sure the base is filled to its maximum capacity and placed on a level surface to ensure stability.