Pyle Portable UHF Wireless Microphone System User Manual

Package Contents

• Mixer Receiver
• 2 Handheld Transmitter Mics
• Power Adapter
• ¼” Audio Cable
• 3.5mm-2RCA Audio Cable
• 2 Audio + Video 3RCA Cables
• 4 AA Batteries

Getting Started

1. Insert the AA batteries into the handheld transmitter mics. Make sure to place the batteries according to the polarity markings inside the battery compartment.
2. Connect the mixer receiver to a power source using the provided power adapter.
3. Connect the mixer receiver to your audio system using the appropriate cables (¼” audio cable, 3.5mm-2RCA audio cable, or 2 audio + video 3RCA cables) based on your system requirements.
4. Turn on the mixer receiver and the handheld transmitter mics.
5. Adjust the volume, tone, and echo controls on the mixer receiver to your desired settings.
6. For Bluetooth streaming, enable Bluetooth on your device and pair it with the mixer receiver. The mixer receiver should appear as "Pyle" in the list of available devices.

Using Wired Microphones

The mixer receiver features 2 ¼” wired microphone inputs. To use wired microphones, connect them to the inputs and adjust the volume, tone, and echo controls as desired. Note that an external amplifier may be required for optimal performance with wired microphones.

Troubleshooting Tips

• Microphone signal dropout: Ensure that the transmitter mics are within the recommended range of the mixer receiver. If the problem persists, try changing the batteries in the transmitter mics.
• No sound from wired microphones: Make sure the microphones are properly connected to the mixer receiver. If the issue persists, try using an external amplifier for optimal performance.
• Bluetooth connection issues: Verify that your device's Bluetooth is enabled and within range of the mixer receiver. If necessary, unpair and re-pair your device with the mixer receiver.
• Rattling noise from microphone battery compartment: Insert a small piece of cotton or foam into the battery compartment to prevent the batteries from rattling during use.
• Popping sounds during use: Avoid speaking too closely or directly into the microphone. Consider using foam filters to minimize plosive sounds.

Frequently Asked Questions

Can I use this microphone system for karaoke?

Yes, the Pyle Portable UHF Wireless Microphone System is suitable for karaoke use, as well as for speech, DJ sound, and house party audio.

Can I connect my phone or tablet to the mixer receiver via Bluetooth?

Yes, the mixer receiver features Bluetooth streaming capability and is compatible with most Bluetooth-enabled devices.

Do I need an amplifier for wired microphones?

An external amplifier may be required for optimal performance with wired microphones. This depends on your audio system setup and the specific microphones being used.

How do I prevent feedback and distortion during use?

To minimize feedback and distortion, avoid using the microphone directly in front of highly amplified speakers. Adjust the volume, tone, and echo controls on the mixer receiver as needed for optimal sound quality.

How do I connect the mixer receiver to my audio system?

The mixer receiver can be connected to your audio system using the provided ¼” audio cable, 3.5mm-2RCA audio cable, or 2 audio + video 3RCA cables, depending on your system requirements.

Q: What type of audio transmission does the Pyle Portable UHF Wireless Microphone System feature?
A: The portable wireless mic set features UHF audio transmission for unsurpassed performance with high signal over noise ratio for clear, noise & distortion-free, crisp vocal & excellent sound reproduction unlike other low grades VHF unit.

Q: Is the wireless handheld microphone Bluetooth-compatible?
A: Yes, the wireless handheld microphone has Bluetooth streaming ability that works with latest devices. Additional features include multisource audio signal mixing ability, dual fixed frequency, EQ controls & built-in acoustic pop filter.

Q: How is the dual microphone powered?
A: The dual microphone features 2 AA battery-operated design while the receiver features a simple plug-in operation via a power adapter. Features independent channel volume control so you can balance the vocals as desired.

Q: What inputs and outputs does the audio mixer receiver feature?
A: The audio mixer receiver features 2 ¼” wired microphone inputs, RCA audio & video signal input/output & rear panel ¼” mixed output. The UHF wireless microphone is ideal for speech, karaoke, DJ sound, and house party audio.

Q: What is included in the complete set?
A: The wireless professional microphone comes with mixer receiver, 2 handheld transmitter mic, power adapter, ¼” audio cable, 3.5mm-2RCA audio cable, 2 audio + video 3RCA cables & 4 AA batteries. Can be used for home & business application.

Q: Can I use rechargeable batteries for the microphones?
A: Yes, as long as the batteries are the correct type (in this case AA), you can use rechargeable batteries.

Q: Can I connect multiple speakers to this system?
A: Yes, you can connect multiple speakers by connecting it to a receiver.

Q: Is there a replacement power line available?
A: Please contact Pyle's parts team directly via their website www.pyleusa.com/pages/contacts for further assistance regarding this concern.

Q: Can I buy additional microphones if the one that comes with it breaks?
A: Yes, you may purchase a replacement microphone for this unit. Please call 718 535 1800 Press 2 then 1 from Monday to Friday from 9 AM to 5 PM EST for assistance.

Q: What is the battery usage on the microphones?
A: The dual microphone features 2 AA battery-operated design. The batteries can last for up to three months depending on usage.