Nozama Automatic Soap Dispenser User Manual

Package Contents

• 1 x Nozama Automatic Soap Dispenser
• 1 x Battery Cover
• 1 x Waterproof Base
• 1 x Quick Guide Manual

Product Setup

1. Remove the battery cover and insert 4 AAA alkaline batteries (not included) into the battery compartment. Make sure the batteries are properly aligned according to the polarity indicators.
2. Attach the waterproof base to the bottom of the soap dispenser.
3. Twist open the top cap of the soap dispenser and fill the container with your preferred liquid soap, hand lotion, or sanitizer. Do not overfill.
4. Twist the cap back on securely.
5. Place the soap dispenser on a flat surface, such as a countertop or sink area.

Using the Soap Dispenser

1. Turn on the soap dispenser by short pressing the "+" button for 1 second. The red light will flash twice.
2. Place your hand under the infrared motion sensor. The soap dispenser will automatically release the liquid when it detects your hand.
3. Adjust the soap liquid level by short pressing the "+" or "-" button to increase or decrease the volume (1.5ml, 2.5ml, or 3.5ml).
4. Turn off the dispenser by short pressing the "-" button for 1 second. The red light will turn off.

Troubleshooting Tips

• If the dispenser is not working, check if the batteries are properly installed and have sufficient power. Replace with new batteries if necessary.
• Ensure that the infrared motion sensor is clean and not obstructed. Wipe gently with a soft cloth if needed.
• If the soap dispenser is not dispensing liquid properly, make sure the liquid is not too thick. Dilute with water if necessary.
• Avoid using the dispenser in strong light environments, as it may cause the infrared sensor to malfunction.

Frequently Asked Questions

What kind of liquid can be used with the dispenser?

The Nozama Automatic Soap Dispenser is compatible with most kinds of liquid, such as hand soap, hand lotion, and sanitizer. However, avoid using overly thick liquids, as they may cause dispensing issues. If needed, dilute the liquid with water to ensure proper discharge.

How do I adjust the amount of soap dispensed?

You can adjust the soap liquid level by short pressing the "+" or "-" button to increase or decrease the volume (1.5ml, 2.5ml, or 3.5ml).

How do I clean the infrared motion sensor?

To clean the infrared motion sensor, gently wipe it with a soft cloth. Ensure that the sensor is clean and unobstructed for optimal performance.

How often do I need to replace the batteries?

The soap dispenser is powered by 4 AAA alkaline batteries (not included). One set of batteries can last for about 3 months with regular use. Replace the batteries when the dispenser stops working or when the performance becomes inconsistent.

Is the soap dispenser waterproof?

The Nozama Automatic Soap Dispenser is designed with a waterproof base and rubber seals to prevent the battery compartment from getting soaked in water. However, it is not fully waterproof, so avoid submerging the dispenser in water or exposing it to excessive moisture.

Q: What is the Nozama Automatic Soap Dispenser equipped with?
A: The Nozama Automatic Soap Dispenser is equipped with adjustable switches, infrared motion sensor, and a waterproof base.

Q: What kind of liquid can be used with this dispenser?
A: The Nozama Automatic Soap Dispenser is compatible with most kinds of liquid, such as hand soap and hand lotion.

Q: How do you adjust the soap volume?
A: The soap volume can be adjusted by using the +/- switch to control the liquid volume from 0.5 to 3ml.

Q: What material is the dispenser made of?
A: The dispenser is made of 304 fingerprint-resistant stainless steel for durability.

Q: What batteries are required for the dispenser?
A: The dispenser requires 4 AAA alkaline batteries (not included), and one replacement can be used for about 3 months.

Q: Is there a warranty for the product?
A: Yes, there is a 1-year warranty for the Nozama Automatic Soap Dispenser, and friendly customer service is available for any questions or concerns.

Q: Can this dispenser be used with liquid hand sanitizer?
A: Yes, it can be used with liquid hand sanitizer.

Q: Is this a foam dispenser?
A: No, this is not a foam dispenser.

Q: How do you activate the dispenser once it's full?
A: Once batteries are installed, simply place your hand under the spout and it will automatically dispense soap.

Q: Where is this product made?
A: This product is made in China.