Newentor Wireless Weather Station with Color Display & Atomic Clock.


Brand: Newentor
Model Number: Newentor

Newentor Weather Station Wireless Indoor Outdoor Thermometer User Manual

Table of Contents

  1. Getting Started
  2. Setting Up the Weather Station
  3. Setting Up the Remote Sensor
  4. Using the Weather Station
  5. Troubleshooting Tips
  6. Frequently Asked Questions

1. Getting Started

Thank you for purchasing the Newentor Weather Station Wireless Indoor Outdoor Thermometer. This device provides you with accurate weather information, including indoor and outdoor temperature and humidity, weather forecast, atomic clock, and more. Please read this user manual carefully before using the product to ensure proper setup and usage.

2. Setting Up the Weather Station

  1. Insert 2x AA batteries (not included) into the battery compartment of the indoor station, or connect the power charger (included) to an electrical outlet.
  2. Place the indoor station on a flat surface or mount it on a wall.
  3. Press and hold the "SET" button for 2 seconds to enter the settings mode.
  4. Use the "+" and "-" buttons to adjust the time, date, 12/24-hour format, temperature unit (°C/°F), and other settings as needed.
  5. Press the "SET" button again to save the settings and exit the settings mode.

3. Setting Up the Remote Sensor

  1. Insert 2x AA batteries (not included) into the battery compartment of the remote sensor.
  2. Place the remote sensor in the desired outdoor location, ensuring it is within 200ft of the indoor station. Mount it vertically on a North-facing wall or in a well-shaded location to avoid direct sunlight and rain.
  3. Ensure that the indoor station and remote sensor are set to the same channel. The indoor station can connect to up to 3 remote sensors.

4. Using the Weather Station

The Newentor Weather Station provides the following information and features:

  • Indoor and outdoor temperature and humidity
  • Weather forecast for the next 12-24 hours
  • Atomic clock with dual alarms and snooze function
  • Moon phase and barometric pressure
  • Customizable temperature alerts
  • Adjustable brightness for the backlight (always-on or power-saving mode)

Use the buttons on the indoor station to navigate through the different features and settings. Press the "SNOOZE/LIGHT" button to activate the backlight or snooze function when the alarm is sounding.

5. Troubleshooting Tips

  1. Problem: The indoor station is not receiving a signal from the remote sensor.
    Solution: Ensure that the indoor station and remote sensor are set to the same channel and are within 200ft of each other. Check the batteries in both devices and replace them if necessary.
  2. Problem: The weather forecast is inaccurate.
    Solution: The weather station may need some time to calibrate and gather enough data for accurate weather predictions. Allow it to operate for a few weeks to improve its forecasting accuracy.
  3. Problem: The atomic clock is not setting the correct time.
    Solution: Ensure that the weather station is set to the correct time zone. The device will automatically search for the WWVB signal each day at 1:00 AM or after resetting. Make sure it is placed in a location where it can receive the signal.
  4. Problem: The backlight is not working.
    Solution: Check the power source and ensure the device is connected to an electrical outlet or has fresh batteries. Press the "SNOOZE/LIGHT" button to activate the backlight.

6. Frequently Asked Questions

  1. Q: Can I use the weather station without connecting it to a remote sensor?
    A: Yes, the indoor station will still display indoor temperature and humidity, atomic clock, and other features without a remote sensor. However, you will not receive outdoor temperature and humidity readings.
  2. Q: How do I change the temperature unit from °C to °F?
    A: Press and hold the "SET" button for 2 seconds to enter the settings mode. Use the "+" and "-" buttons to navigate to the temperature unit setting and change it to your preference. Press the "SET" button again to save the settings and exit the settings mode.
  3. Q: Can I use more than one remote sensor with the indoor station?
    A: Yes, the indoor station can connect to up to 3 remote sensors, allowing you to monitor temperature and humidity in multiple locations.
  4. Q: How do I set the atomic clock and dual alarms?
    A: Press and hold the "SET" button for 2 seconds to enter the settings mode. Use the "+" and "-" buttons to adjust the time, date, and alarm settings as needed. Press the "SET" button again to save the settings and exit the settings mode.

FAQ [continued]

Q: How many remote sensors can be connected to the Newentor Weather Station?
A: The Newentor Weather Station can be connected to up to 3 wireless remote sensors at the same time. However, it only comes with one remote sensor included.

Q: What is the size of the LCD screen on the Newentor Weather Station?
A: The Newentor Weather Station has a 7.5 inch LCD screen display.

Q: Can the outdoor sensor be placed on the south side of the house?
A: Yes, the outdoor sensor can be placed on any side of the house. However, it is recommended to keep it in a shaded area to avoid interference from direct sunlight.

Q: How do I adjust the backlight brightness on the Newentor Weather Station?
A: If the device is powered by batteries, the backlight will only light up for 15 seconds in power saving mode. To wake up the backlight, touch the "Snooze" button. If plugged in with a power adapter, press the 6th button on the right side to turn on full brightness and press again to begin dimming. Keep pressing until it reaches full dark and then touch the top button to turn it back on for 15 seconds.

Q: How long does it take for the atomic clock to update?
A: To manually search for WWVB signal, set your time zone and turn ON DST first. Then press and hold “UP” button for 5 seconds. The process takes about 7 minutes and the backlight will turn dark during this time. Once complete, the time and date will be automatically set.

Q: Why isn't my outdoor sensor appearing on my home screen?
A: Try resetting both indoor station and remote sensor by removing all batteries and unplugging power adapter for 10 minutes before inserting them again. Make sure both indoor station and outdoor sensor are set to the same channel. If the problem persists, connect the remote sensor manually by pressing the "DOWN" button to change the channel of the indoor station and then press and hold "DOWN" button to start searching for outside signal while pressing “TX” button of outdoor sensor.


Specifications

BrandNewentor
ManufacturerNewentor
Model NumberNewentor
Package Dimensions8.5 x 5.87 x 2.83 inches
Item Weight1.12 pounds
ASINB0836CM7KY
Item model numberNewentor
Customer Reviews4.4 out of 5 stars 9,406 ratings 4.4 out of 5 stars
Best Sellers Rank#2,234 in Patio, Lawn & Garden
Are Batteries IncludedNo
Power SourceAc/Dc, Battery Powered
Display TypeLCD
Weight1.12 pounds



The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.