Frigidaire Air Conditioner Support Bracket
The Frigidaire 18FFRACB01 Air Conditioner Support Bracket is a reliable and sturdy bracket designed to support window air conditioner units weighing up to 80lbs (36.2kg). Made fro…
Manual and instructions
Instruction-focused content generated from the current product data and source context.
Frigidaire 18FFRACB01 Air Conditioner Support Bracket User Manual
Installation Instructions
- Ensure your window and window sill are in good condition and strong enough to support the weight of the air conditioner and bracket.
- Adjust the bracket to fit the thickness of your wall, which can be between 4" to 11" (10.1cm - 27.9cm).
- Use the built-in bubble level to ensure the bracket is level, which is critical for proper condensate runoff.
- Position the bracket on the window sill and secure it with the provided screw. This should be done from inside, and no drilling into the outdoor wall or siding is necessary.
- Place the air conditioner on the bracket and ensure it is stable and level.
Required Tools
- Drill with 5/32" bit size
- Tape rule
- Pencil
- Phillips head screwdriver
- Two 7/16" wrenches or sockets
Troubleshooting Tips
- Bracket is not level: Re-check with the built-in bubble level and adjust as necessary.
- Screw is not securing the bracket: Ensure you are using the correct size drill bit and that the screw is not stripped.
- Bracket doesn't fit window sill: Double-check the wall thickness and adjust the bracket accordingly.
- AC unit is not stable: Make sure the bracket is properly installed and the air conditioner is centered on the bracket.
Frequently Asked Questions (FAQs)
What size air conditioner can this bracket support?
The Frigidaire 18FFRACB01 bracket supports window air conditioner units up to 80lb (36.2kg), which typically corresponds to 5,000 to 10,000 BTU units.
Do I need to drill holes into the exterior wall or siding?
No, the design allows for easy indoor installation without the need for drilling into the outdoor wall or siding.
What is included with the support bracket?
The package includes the support bracket and all necessary hardware for installation.
Is this bracket compatible with all window designs?
The bracket is adjustable and designed to fit most window designs, but it may not be suitable for windows with less than a 4" sill or more than an 11" wall thickness.
Can this bracket be used with a Frigidaire 15,100 BTU AC unit?
The bracket is intended for use with AC units up to 10,000 BTU and may not be suitable for a 15,100 BTU unit, which likely exceeds the weight limit.
What should I do if the screws strip or are of poor quality?
If you encounter issues with the provided screws, you may need to purchase higher quality screws separately. Ensure you pre-drill holes and use the correct tools to avoid stripping.
What if the bracket doesn't fit my window?
If the bracket doesn't fit your window, double-check the measurements and adjustments. If it still doesn't fit, it may not be compatible with your window design.
Please note that this is a basic guide and it's always recommended to consult the product's official user manual for the most accurate and detailed information. Additionally, when working with tools and installing appliances, safety should always be the top priority. If you're unsure about the installation process or if the bracket is suitable for your air conditioner, it's best to seek professional assistance.Frequently asked questions
Q: What is the weight capacity of the Frigidaire 18FFRACB01 Air Conditioner Support Bracket?
A: The Frigidaire 18FFRACB01 Air Conditioner Support Bracket can support window air conditioner units up to 80 lbs (36.2 kg).
Q: What is the adjustable range for wall thickness?
A: The support bracket can adjust to fit walls from 4" to 11" (10.1 cm - 27.9 cm) thick.
Q: Does it come with a built-in bubble level?
A: Yes, the Frigidaire 18FFRACB01 Air Conditioner Support Bracket has a built-in bubble level to guide the proper angle for condensate runoff.
Q: Is drilling required for installation?
A: No, there is no need to drill into the outdoor wall or siding. The unit can be secured at the window sill with a single screw for easy indoor installation.
Q: What tools are required for assembly?
A: The tools required for assembly include a drill with a 5/32" bit size, tape rule, pencil, Phillips head screwdriver, and two 7/16" wrenches or sockets.
Q: What are the dimensions of the product?
A: The Frigidaire 18FFRACB01 Air Conditioner Support Bracket has dimensions of 13 x 3.5 x 1.5 inches and weighs 2 pounds.
Q: What is the material of the bracket?
A: The bracket is made of galvanized steel.
Q: Is it compatible with all window air conditioner models?
A: The support bracket is designed to fit most window designs and is compatible with window air conditioner units.
Q: What is included in the package?
A: The package includes the support bracket and all necessary hardware for installation.
Q: Is this product battery-operated?
A: No, this product does not require batteries.
Q: Can you provide the ASIN and model number of the product?
A: The ASIN for the Frigidaire 18FFRACB01 Air Conditioner Support Bracket is B0872XNZP3. The model number is also 18FFRACB01.
Q: What is the color of the support bracket?
A: The support bracket is white in color.
Q: Where is this product manufactured?
A: This product is manufactured in China.
Q: What are the customer ratings for this product?
A: The Frigidaire 18FFRACB01 Air Conditioner Support Bracket has received a customer rating of 4.2 out of 5 stars based on 272 ratings.
Q: Is this product a best seller in its category?
A: It ranks #475 in Air Conditioner Accessories on Amazon.
Q: When was this product first available for purchase?
A: The Frigidaire 18FFRACB01 Air Conditioner Support Bracket was first available for purchase on April 13, 2020.
Specifications
Structured product details pulled from the latest available product data.
| Brand | Frigidaire |
|---|---|
| Model Number | 18FFRACB01 |
| Category | Appliances > Home & Kitchen > Heating, Cooling & Air Quality > Parts & Accessories > Air Conditioner Parts & Accessories > Accessories |
| Color | White |
| Material | Galvanized Steel |
| Weight | 2 Pounds |
| Dimensions | 13 x 3.5 x 1.5 inches |
| First Available | April 13, 2020 |
| Brand Name | Frigidaire |
| Model Info | 18FFRACB01 |
| Item Weight | 2 pounds |
| Product Dimensions | 13 x 3.5 x 1.5 inches |
| Country of Origin | China |
| Item model number | 18FFRACB01 |
| Part Number | 18FFRACB01 |
| Special Features | Built in bubble level, Easily adjust support bracket to fit most window designs, Includes all hardware needed |
| Color | White |
| Compatible Device | Window Air Conditioner |
| Material Type | Galvanized Steel |
| Included Components | Support bracket, hardware |
| Batteries Included? | No |
| Batteries Required? | No |
| ASIN | B0872XNZP3 |
| Customer Reviews | 4.2 4.2 out of 5 stars 272 ratings 4.2 out of 5 stars |
| Best Sellers Rank | #572,755 in Home & Kitchen (See Top 100 in Home & Kitchen) #475 in Air Conditioner Accessories |
| Date First Available | April 13, 2020 |
| Item Dimensions LxWxH | 13 x 3.5 x 1.5 inches |
| Item Weight | 2 Pounds |
Use this page carefully
ProductReviewGPT pages are AI-assisted summaries. When a source document is available, it should take priority over the generated summary for important operating, warranty, safety, or compliance details.