Lenovo Mini Projector M1 User Manual

Table of Contents

1. Getting Started
2. Connecting to Devices
3. Using the Touch Panel and Remote Control
4. Adjusting Focus and Keystone
5. Wireless Screen Mirroring
6. Connecting to Bluetooth Audio Devices
7. Troubleshooting
8. Frequently Asked Questions

1. Getting Started

1. Charge the projector using the provided USB cable. The built-in 7000mAh battery should last up to 3 hours depending on the brightness mode.
2. Slide the lens cover open to turn on the projector. The projector will automatically start up.
3. Peel off the protective film from the lens.

2. Connecting to Devices

1. For wired connections, use the HDMI or USB ports on the side of the projector. Connect your device using the appropriate cable.
2. For wireless connections, use Airplay (for iOS devices) or Miracast (for Android devices).

3. Using the Touch Panel and Remote Control

1. The touch panel on the projector allows you to navigate through menus and adjust settings. Gently swipe and tap to navigate and select items.
2. The remote control can also be used for navigation and adjusting settings. Pair the remote control with the projector by holding down the OK and Volume Down buttons for 5 seconds.

4. Adjusting Focus and Keystone

1. To adjust focus, gently press the red button on the touch panel. A focus ring will appear on the screen.
2. Tap up or down on the touch panel to adjust the focus until the image is sharp.
3. The projector has an auto keystone correction function that will automatically adjust the image to be flat and undistorted. This happens within 1 second of laying down the projector.

5. Wireless Screen Mirroring

1. Share your screen from your phone or other devices using Airplay (for iOS devices) or Miracast (for Android devices).
2. Note that copyrighted content from Hulu, Netflix, and similar services cannot be mirrored or screen-cast. Download and use the apps directly through the projector to view copyrighted content from these providers.

6. Connecting to Bluetooth Audio Devices

1. Go to Settings > Bluetooth Settings on the projector.
2. Put your Bluetooth audio device into pairing mode.
3. Select your audio device from the list of available devices on the projector.

7. Troubleshooting

• If the projector is not turning on, make sure the lens cover is fully open and the battery is charged.
• If the image is blurry, adjust the focus using the focus ring as described in section 4.
• If the image is distorted, make sure the projector is on a flat surface and allow the auto keystone correction function to adjust the image.
• If you are unable to connect to a device, make sure the device is compatible with the projector and the appropriate cables or wireless connections are being used.

8. Frequently Asked Questions

• Can I use this projector with Chromecast? No, Chromecast is not supported by this projector.
• What is the display resolution of the projector? The display resolution is 854 x 480 pixels.
• How do I connect the projector to my phone? You can connect your phone using Airplay (for iOS devices) or Miracast (for Android devices).
• Can I connect the projector to a Bluetooth speaker? Yes, you can connect the projector to a Bluetooth speaker by following the steps in section 6.
• How do I update the projector's software? Go to Settings > General > Online Upgrade to download and install the latest software version.

Q: What is the Lenovo Mini Projector M1?
A: The Lenovo Mini Projector M1 is a portable pico smart DLP projector with WiFi and Bluetooth, built-in 7000mAh battery and speaker, and Android OS. It is designed for movie and video outdoor projection for iPhone and Android phones.

Q: What are the dimensions and weight of the Lenovo Mini Projector M1?
A: The Lenovo Mini Projector M1 has dimensions of 4.76 x 2.4 x 1.5 inches and weighs 12.7 ounces.

Q: What is the display resolution of the Lenovo Mini Projector M1?
A: The display resolution of the Lenovo Mini Projector M1 is 854 x 480 pixels.

Q: What is the brightness of the Lenovo Mini Projector M1?
A: The Lenovo Mini Projector M1 has an incredible 200 ANSI Lumen DLP lamp, which provides a clear picture even in low light conditions.

Q: Can I connect my devices wirelessly to the Lenovo Mini Projector M1?
A: Yes, you can share all your media from all your devices via cable (HDMI, USB available) or wireless (Airplay, Miracast).

Q: Does the Lenovo Mini Projector M1 have a built-in battery?
A: Yes, it has a large built-in 7000mAh rechargeable battery that allows it to work continuously for up to 3 hours depending on the brightness mode you choose for viewing.

Q: Is it possible to run the Lenovo Mini Projector M1 on 220v outlets?
A: Yes, it is possible to run the Lenovo Mini Projector M1 on 220v outlets as the adapter can accept a voltage of 100-240V.

Q: Can I mount the Lenovo Mini Projector M1 on a ceiling?
A: No, you do not need to mount the Lenovo Mini Projector M1 on a ceiling as it has a built-in battery and can sit on a counter or desk.

Q: Can I connect the Lenovo Mini Projector M1 to a Bluetooth sound system at the same time as connecting it to my PC via HDMI?
A: It is suggested to copy the video to a USB flash drive and cast it through the projector, and then connect the Bluetooth speaker.

Q: Is it possible to mirror or screen-cast copyrighted content from Hulu, Netflix, and similar services?
A: No, it is not possible to mirror or screen-cast copyrighted content from Hulu, Netflix, and similar services. You need to download and use the apps directly through Lenovo portable projector to view copyrighted content from these providers. Chromecast is not supported.