BLAUPUNKT AMP1804BT Car Audio 4-Channel Class D Amplifier User Manual
Package Contents
- 1 x BLAUPUNKT AMP1804BT Amplifier
- 1 x User Manual
Product Features
- 1600W Maximum Power Full-Range Amplifier with Bluetooth
- Optimized 150-watt RMS output
- Amplifier Class D 4/3/2 Channel
- Frequency Response: 10Hz - 30Hz
- Signal-To-Noise Ratio: =>90dB
- Voltage Supply: 11 - 15V DC
- Gain Adjust: 250mV-6V
- Dimensions: 6.7" x 3.8" x 1.8"
Installation
- Choose a suitable location for the amplifier, ensuring it is away from any heat sources and has proper ventilation.
- Using the mounting holes on the metal casing, mount the amplifier on spacers to keep it away from the mounting surface.
- Connect the power cables to the amplifier: positive (+) to the positive terminal and negative (-) to the negative terminal.
- Connect the switched/remote power post to a positive accessory source in your vehicle. This will turn the amplifier on and off with your vehicle's ignition.
- Connect your speakers to the amplifier using the appropriate speaker terminals (front and rear).
- Adjust the gain, if necessary, to match the input level of your audio source.
Bluetooth Connection
- Turn on your Bluetooth-enabled device (e.g., smartphone, tablet).
- Go to the Bluetooth settings on your device and search for available devices.
- Select the BLAUPUNKT AMP1804BT from the list of available devices.
- Once connected, you can stream audio from your device to the amplifier and connected speakers.
Troubleshooting Tips
- If the amplifier is not turning on, check the power connections and ensure the switched/remote power post is connected to a positive accessory source.
- If you are experiencing poor audio quality or distortion, adjust the gain settings on the amplifier to match your audio source's input level.
- If the amplifier is overheating, ensure it is mounted in a location with proper ventilation and away from heat sources.
- If you are having difficulty connecting to the amplifier via Bluetooth, ensure your device's Bluetooth is turned on and try reconnecting.
Frequently Asked Questions
Can this amplifier be used with 2-ohm speakers?
Yes, the BLAUPUNKT AMP1804BT is compatible with 2-ohm speakers. The RMS power output at 2 ohms is 150W x 4.
Does this amplifier come with an in-line fuse?
No, the BLAUPUNKT AMP1804BT does not include an in-line fuse. It is recommended to use a separate fused power supply for safety.
Can I adjust the bass and treble on this amplifier?
This amplifier does not have built-in bass and treble adjustments. However, you can adjust the audio settings on your connected device (e.g., smartphone, tablet) to achieve the desired sound.
Is there a way to control the fader (front and rear speaker levels) with this amplifier?
The BLAUPUNKT AMP1804BT does not have an external fader control. However, you can adjust the front and rear input levels on the amplifier itself. Note that making adjustments while driving is not recommended and may be difficult depending on the amplifier's location.
Can I connect a wired audio source to this amplifier?
Yes, the BLAUPUNKT AMP1804BT has RCA inputs, allowing you to connect a wired audio source such as a CD player or satellite radio.
FAQ [continued]
Q: What is the maximum power output of the BLAUPUNKT AMP1804BT Car Audio 4-Channel Class D Amplifier with Bluetooth?A: The maximum power output of this amplifier is 1600 watts.
Q: What is the RMS power output for 4 ohms and 2 ohms?
A: The RMS power output for 4 ohms is 100 watts per channel and for 2 ohms is 150 watts per channel.
Q: Does it come with an antenna?
A: Yes, it comes with its own antenna.
Q: What are the dimensions of this amplifier?
A: The dimensions of this amplifier are 6.7" x 3.8" x 1.8".
Q: Can Bluetooth be disabled on the amp?
A: No, there is no interface that would allow Bluetooth to be disabled.
Q: How do you switch between Bluetooth and RCA inputs?
A: Bluetooth needs to be disabled on the source device before music can be heard from the RCA inputs.
Q: Can this amplifier power a dual voice coil sub with each voice coil at 2 ohms?
A: Yes, it can but it's recommended not to bridge it at 2 ohms as these class D amps run hot and could trip the thermal cut off.
Q: Does anyone know the pairing pin?
A: The pairing pin is 1234.
Q: Is stereo supported on this Bluetooth?
A: No, only mono is supported on this Bluetooth.
Q: Is there a way to adjust bass/treble?
A: No, there are no adjustments for bass/treble.
Overall, the BLAUPUNKT AMP1804BT Car Audio 4-Channel Class D Amplifier with Bluetooth is a powerful and compact amplifier that can boost your music while on the road. It comes with its own antenna and has optimized RMS power output for 4 ohms and 2 ohms. While there is no way to disable Bluetooth on the amp, it can be connected to RCA inputs when Bluetooth is disabled on the source device. Additionally, there are no adjustments for bass/treble, but the amplifier produces a good clean sound at a low budget price point.
Specifications
| Brand | BLAUPUNKT |
| Manufacturer | BLAUPUNKT |
| Model Number | AMP1804BT |
| Category | Industrial & Scientific > Electronics > Home Audio > Home Theater > Receivers & Amplifiers > Amplifiers |
| Product Dimensions | 10 x 6 x 3 inches; 2.51 Pounds |
| Item model number | AMP1804BT |
| Date First Available | September 2, 2020 |
| ASIN | B08H7DR56W |
| Best Sellers Rank | See Top 100 in Electronics |
| Item Dimensions LxWxH | 10 x 6 x 3 inches |
| Voltage | 15 Volts |
| Number of Channels | 4 |
| Brand Name | BLAUPUNKT |
| Ean | 0815592026402 |
| Global Trade Identification Number | 00815592026402 |
| Included Components | AMPLIFIER |
| Number of Items | 1 |
| Part Number | AMP1804BT |
| UNSPSC Code | 32101500 |
| UPC | 815592026402 |
| Voltage | 15.0 volts |
| GTIN | 815592026402 |
| Dimensions | 10 x 6 x 3 inches; 2.51 Pounds |
| First Available | September 2, 2020 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.