SCRIB3D P1 3D Printing Pen User Manual

Getting Started

1. Unpack your SCRIB3D P1 3D Printing Pen and included accessories.
2. Plug the power adapter into the back of the pen and connect it to a power source.
3. Select the PLA filament color you wish to use and insert the end into the feeding hole at the back of the pen.
4. Turn on the pen by plugging it in. The red light will indicate that the pen is warming up. This process takes approximately 2-3 minutes.

Using the Pen

1. Once the pen is heated (the red light will turn off), double-click the forward button to start feeding the filament through the pen.
2. When the filament reaches the nozzle and starts to extrude, click the forward button once to stop feeding.
3. Press and hold the forward button or double-click for continuous flow to start creating your design.
4. To adjust the speed of extrusion, use the stepless speed slider for optimal control.
5. When you have finished, press and hold the reverse button to retract the remaining filament.

Finishing Up

1. Once your project is complete, ensure the filament is fully retracted by pressing the reverse button.
2. Trim the end of the filament before storing.
3. Unplug the pen to turn it off. The pen will automatically enter sleep mode after 2 minutes of inactivity.

Troubleshooting Tips

• If the PLA filament crackles or bubbles, adjust the temperature setting lower to avoid overheating.
• If the filament is not sticking to the surface, increase the temperature slightly.
• Should the pen become clogged, try retracting the filament and then feeding it through again. Ensure the nozzle is clean and free of debris.
• If the pen does not heat up, check the power connection and ensure it is properly plugged in.
• For consistent flow, ensure that the filament is not tangled and is feeding smoothly into the pen.

Frequently Asked Questions (FAQ)

What types of filament can the SCRIB3D P1 Pen use?

The SCRIB3D P1 is compatible with PLA (160-210℃, 320-410°F) and ABS (210-235℃, 410-455°F) filaments.

How do I prevent the filament from leaking out during sleep mode?

Place a paper plate or piece of paper under the nozzle during sleep mode to catch any excess filament. Ensure that the pen is properly maintained and the filament is retracted when not in use.

Is the 3D pen suitable for children?

The pen is recommended for teens and above due to the hot nozzle. Always supervise younger children during use.

How long can I use the pen continuously?

It is suggested to give the pen a break every 30-60 minutes to prevent overheating and to maintain performance.

Can I use third-party PLA filament with this pen?

Yes, you can use PLA filament from other suppliers, but ensure that it is of good quality for the best performance.

What should I do if the pen stops working?

If the pen stops working, check the power supply and filament for any issues. If problems persist, contact customer service for assistance, as the pen comes with a 1-year guarantee.

Please note that the above HTML content is a simplified user manual and FAQ based on the provided product information. For actual use, refer to the manufacturer's official documentation and safety guidelines.

FAQ [continued]

**SCRIB3D P1 3D Printing Pen FAQ**

**What is included in the SCRIB3D P1 3D Printing Pen kit?**
The kit includes the 3D pen, 3 starter colors of PLA filament, a stencil book + project guide, a power adapter, and a step-by-step manual.

**Is the SCRIB3D P1 3D Printing Pen beginner-friendly?**
Yes, the pen is designed to be user-friendly for beginners. Simply plug in the adapter, choose your filament, wait for it to warm up, and start creating.

**What types of filaments can be used with the SCRIB3D P1 Pen?**
The pen is compatible with PLA (160-210℃) and ABS (210-235℃) filaments. It features temperature adjustability for different filament types.

**Is the SCRIB3D P1 Pen safe to use?**
Yes, the pen features a ceramic nozzle and premium motor to ensure safety and high performance without clogging. It also has a 2-minute auto sleep function and anti-clogging features.

**How does the speed control work on the SCRIB3D P1 Pen?**
The pen has an easy-to-use stepless speed slider for optimal speed adjustment. This allows for precise control whether working on slow intricate projects or faster infill work.

**What are some tips for maximizing the use of the SCRIB3D P1 Pen?**
Some tips include using high-quality PLA filaments, experimenting with different temperatures for better adhesion, utilizing additional tools like a wood burner for shaping, and referring to YouTube videos for techniques.

**Are there any known issues with the SCRIB3D P1 Pen?**
Some users have reported issues with speed control inconsistencies and filament leakage. However, these issues are manageable considering the price point of the pen.

**Is there a warranty for the SCRIB3D P1 Pen?**
Yes, there is a 1-year guarantee provided along with responsive customer service. Customers can reach out for assistance with any quality issues or troubleshooting needs.

**Overall, what are customers saying about the SCRIB3D P1 3D Printing Pen?**
Customers have expressed satisfaction with the pen's affordability, ease of use, and versatility for various projects. While some encountered minor issues, overall feedback has been positive regarding its value and performance.

Specifications

Brand	SCRIB3D
Manufacturer	SCRIB3D
Model Number	SCRIB_PEN_P1
Category	Toys & Games > Industrial & Scientific > Additive Manufacturing Products > 3D Printing Pens
Product Dimensions	4.61 x 7.87 x 1.97 inches
Item Weight	12.4 ounces
Country of Origin	China
ASIN	B08HM4133L
Item model number	SCRIB_PEN_P1
Best Sellers Rank	#194 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #1 in 3D Printing Pens
Customer Reviews	4.3 4.3 out of 5 stars 17,777 ratings 4.3 out of 5 stars
Release date	October 1, 2020
Writing Instrument Form	Scriber
Color	Blue, White, Black
Ink Color	Red
Age Range (Description)	Teen
Color	Red
Weight	12.4 ounces
Dimensions	4.61 x 7.87 x 1.97 inches