Bousnic Dog Shock Collar for 2 Dogs - User Manual

Package Contents

• 1 x Remote Transmitter
• 2 x Collar Receivers
• 2 x Adjustable Nylon Collars
• 1 x USB Charging Cable
• 1 x Adapter
• 1 x Test Light
• 4 x Contact Points
• 4 x Conductive Silicone Covers
• 1 x User Manual

Charging the Devices

1. Connect the USB charging cable to the adapter.
2. Plug the adapter into a power outlet.
3. Connect the charging cable to the charging ports on the remote transmitter and collar receivers.
4. Charge the devices for 2-3 hours for the initial charge, and 4 hours for subsequent charges.
5. When fully charged, the LED indicator on the devices will turn green.

Adjusting the Collar Length

1. Slide the buckle on the strap up and down to adjust the collar length.
2. Slide and thread the strap into the hole of the buckle to fix the collar length.
3. To get the minimum collar length of 6 inches, slide the buckle to the part closest to the receiver.
4. To get the maximum collar length of 27 inches, slide the buckle to the part farthest away from the receiver.

Pairing the Remote Transmitter and Collar Receivers

1. Turn on the remote transmitter and collar receivers by pressing the power button on each device.
2. Press and hold the 1/2 button on the remote transmitter for 5 seconds until the LED indicator turns solid green.
3. Press the power button on the collar receiver. The LED indicator will flash green, indicating successful pairing.
4. Repeat the process for the second collar receiver, using the other channel on the remote transmitter (1 or 2).

Using the Training Modes

1. Select the desired channel (1 or 2) on the remote transmitter to control the corresponding collar receiver.
2. Press the "Beep" button for the beep mode, which emits a standard beep sound.
3. Press the "Vibration" button for the vibration mode, which provides a standard vibration.
4. Press the "Shock" button for the safe shock mode, which delivers an adjustable shock between levels 1-16. Use the "+" and "-" buttons to adjust the shock intensity.

Troubleshooting Tips

1. If the collar receiver is not responding, ensure it is turned on and paired with the remote transmitter.
2. If the collar receiver is not charging, check the charging cable and adapter for damage or try a different power source.
3. If the remote transmitter is not controlling the collar receiver, ensure you have selected the correct channel (1 or 2).
4. If the shock mode is not effective for long/thick hair dogs, ensure the conductive silicone covers are properly installed and the contact points are making contact with the dog's skin.

Frequently Asked Questions

Q: How long does the battery last on the collar receivers and remote transmitter?

A: The collar receivers typically last for 11-15 days, while the remote transmitter lasts for over 1 month, depending on usage.

Q: Is the remote transmitter waterproof?

A: No, the remote transmitter is not waterproof. Please keep it away from water.

Q: Can I charge all three devices (remote transmitter and two collar receivers) simultaneously?

A: The provided charging cable only supports charging two devices at a time. You will need to charge the third device separately.

Q: What is the recommended dog weight and neck size for this training collar?

A: The training collar is suitable for dogs weighing 8-120 lbs and with a neck size between 6-27 inches.

Q: How do I switch between controlling the two collar receivers?

A: Use the 1/2 button on the remote transmitter to switch between channels and control the corresponding collar receiver.

Q: What are the dimensions of the receiver?
A: The receiver is 2.16(L)X1.37(W)X1(H) inches and weighs 0.12lbs.

Q: Is this the newer model? What are the improvements?
A: Yes, this is the newer model. Improvements include a lock button to prevent accidental beeping/vibrating/shocking, IPX7 100% waterproof receiver, smaller and lighter receivers, and a more durable nylon collar.

Q: Is it easy to switch between dogs?
A: Yes, it is super easy to switch between dogs by moving the side up or down depending on which dog you are on.

Q: How loud is the beep volume?
A: It is not extremely loud and cannot be adjusted, but it works for most dogs.

Q: Can replacement parts be ordered?
A: Yes, replacement parts can be purchased through Amazon.

Q: Can silicone caps be ordered separately?
A: Yes, contact points with silicone caps are sold on Amazon.

Q: How do you get the remote to stop randomly switching between collars?
A: Our remote has a selection switch on the side and should not change by itself. If it does, consider returning the unit.

Q: Is it necessary to have the rubber black things on the contact points?
A: The rubber black things are used to "train" the dog to the sound before starting shock treatment. They can be left off if only using sound or vibration modes.

Q: Is there a replacement collar available?
A: Yes, collar receiver replacements are available for purchase on Amazon.