User Manual: SUNMON QuadCast Boom Arm Mic Stand for HyperX QuadCast & QuadCast S Microphones

Package Contents:

• 1x HyperX QuadCast Mic Scissor Arm Stand
• 1x Table Mounting Clamp
• 1x Screw Adapter (3/8" to 5/8" pre-installed)

Specifications:

• Brand: SUNMON
• Item Weight: 1.26 pounds
• Package Dimensions: 16.22 x 4.61 x 1.81 inches
• ASIN: B08PYS1YKW
• Material Type: Steel
• Color Name: Mic Stand

Step 1: Assemble the Boom Arm Mic Stand

Before installing your HyperX QuadCast microphone to the boom arm, loosen the knob on the scissor arm stand and adjust it to the desired angle. Tighten the knob after installing your gaming mic.

Step 2: Attach the Table Mounting Clamp

Attach the table mounting clamp to the edge of your desk or table. Make sure the clamp is securely tightened and that the desk surface is not damaged. The clamp can accommodate desktops up to 1.89"/4.8cm thick.

Step 3: Install the HyperX QuadCast Microphone

Attach the HyperX QuadCast microphone to the screw adapter (3/8" to 5/8") on the boom arm. The adapter is pre-installed on the mic stand for your convenience. Ensure the microphone is securely fastened and in the desired position.

Step 4: Adjust the Boom Arm Position

Adjust the boom arm to the desired position for optimal microphone placement. The dual suspension springs on each boom arm help maintain stability and prevent the microphone from shaking, sinking, or making noise.

Step 5: Cable Management

Organize your microphone cables by securing them along the boom arm using cable ties or clips (not included).

Frequently Asked Questions

Q: Can I use this boom arm with other microphones besides the HyperX QuadCast?

A: Yes, the included screw adapter can be converted from 3/8" to 5/8", making it compatible with most microphones and shock mounts.

Q: Is the table mounting clamp suitable for both horizontal and vertical mounting?

A: Yes, the table mounting clamp can be used for both horizontal and vertical mounting, providing flexibility in your setup.

Q: Can I use this boom arm with a wall mount?

A: This specific boom arm is designed for use with a table mounting clamp, but there are other SUNMON products available that are compatible with wall mounts.

Q: Does this boom arm come with a pop filter?

A: No, the pop filter is not included in the package. However, SUNMON offers a separate pop filter compatible with the HyperX QuadCast microphone.

Q: Can I run my microphone cable inside the boom arm?

A: The boom arm does not have a built-in cable management system for running the cable inside the arm. However, you can use cable ties or clips (not included) to secure the cable along the boom arm.

Q: What microphone is this boom arm stand compatible with?
A: This boom arm stand is specifically designed to fit the HyperX QuadCast and QuadCast S RGB USB condenser microphones.

Q: Is the boom arm stable?
A: Yes, the boom arm features dual suspension springs on each arm and reinforced knobs to keep the microphone securely in place and prevent shaking or sinking.

Q: Does the package include an adapter for the HyperX QuadCast microphone?
A: Yes, the package includes a screw adapter (3/8" to 5/8") that is pre-installed in the mic stand and compatible with most microphones and shock mounts, including the HyperX QuadCast.

Q: Can the microphone be oriented in any direction?
A: Yes, the microphone can be adjusted to any angle or height using the flexible boom arm.

Q: Is this boom arm stand compatible with other microphones?
A: While it is designed specifically for the HyperX QuadCast and QuadCast S microphones, it may also work with other similarly sized microphones. However, it is recommended to check compatibility before purchasing.

Q: Does this product come with a warranty?
A: The manufacturer does not mention a warranty for this product.

Q: What is the maximum load capacity of this boom arm stand?
A: The maximum load capacity of this boom arm stand is 3.08 pounds (1.4 kg).

Q: What is included in the package?
A: The package includes 1x Mic Scissor Arm Stand, 1x Table mounting clamp, and 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note that the screw adapter is pre-installed in the mic stand.

Q: What are the dimensions and weight of this product?
A: The item weight is 1.26 pounds and the package dimensions are 16.22 x 4.61 x 1.81 inches.

Q: Is this boom arm stand compatible with the HyperX SoloCast microphone?
A: Yes, this boom arm stand is also compatible with the HyperX SoloCast microphone.