ELAC 4" Passive Bookshelf Speakers User Manual

Introduction

Thank you for purchasing the ELAC 4" Passive Bookshelf Speakers. This manual will guide you through the setup, usage, and troubleshooting of your new speakers. Please read through the entire manual before setting up your speakers to ensure optimal performance and longevity.

Package Contents

• 1 x Pair of ELAC 4" Passive Bookshelf Speakers (BS41-BK)

Specifications

For detailed specifications, please refer to the product information provided above.

Setup

1. Place the speakers on a stable surface, such as a bookshelf or speaker stands, ensuring they are level and secure.
2. Position the speakers at least 3-4 feet away from any walls and 4+ feet apart from each other, angled slightly in towards your listening position. This will help to create a more immersive soundstage.
3. Connect the speakers to your amplifier or receiver using high-quality speaker wire. Make sure to connect the positive (+) terminal on the speaker to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on the amplifier.
4. Connect your audio source (laptop, personal computer, tablet, smartphone, etc.) to your amplifier or receiver.
5. Adjust the volume, bass, and treble controls on your amplifier or receiver to your desired levels.

Usage

Once your speakers are properly set up, you can enjoy high-quality audio playback from your connected devices. To get the best performance from your speakers, follow these tips:

• For optimal sound quality, remove the cloth grills and metal dome grills covering the tweeters.
• When streaming audio, use an equalizer to adjust the bass and treble frequencies to your liking.
• Keep the volume within a reasonable range to avoid distortion and damage to the speakers.

Troubleshooting

If you encounter any issues with your speakers, try the following troubleshooting tips:

1. Check all connections to ensure they are secure and properly connected.
2. Ensure that your amplifier or receiver is set to the correct input source.
3. If you experience rattling or buzzing from the speakers, remove the drivers and place a piece of felt on the speaker wire coming from the input plate. This will help to eliminate any rattling caused by the wire touching the rear port.
4. If the issue persists, contact ELAC customer support for further assistance.

Frequently Asked Questions

Can these speakers be used without a subwoofer?

Yes, the ELAC 4" Passive Bookshelf Speakers can be used without a subwoofer. They produce good bass response for their size. However, if you prefer more powerful bass, you may want to consider pairing them with a dedicated subwoofer.

What amplifier or receiver should I use with these speakers?

These speakers can be used with a variety of amplifiers and receivers, as long as they are compatible with the speakers' impedance (6 Ohms) and can provide sufficient power output. A 100W per channel amplifier should provide adequate power for these speakers.

Do these speakers come with speaker wire?

No, speaker wire is not included with the ELAC 4" Passive Bookshelf Speakers. You will need to purchase speaker wire separately to connect the speakers to your amplifier or receiver.

Can I mount these speakers on the wall?

While the ELAC 4" Passive Bookshelf Speakers do not come with built-in wall-mounting hardware, you can use third-party speaker brackets or mounts to attach them to your wall. Ensure that the mounts you choose are compatible with the speakers' dimensions and weight.

For any further questions or concerns, please contact ELAC customer support.

Q: What are the specifications of the ELAC 4" Passive Bookshelf Speakers?
A: The ELAC 4" Passive Bookshelf Speakers have a brand name of ELAC and a model number of BS41-BK. They are bookshelf speakers with wired connectivity technology and compatible with laptops, personal computers, tablets, and smartphones. They have a weight of 8.2 pounds and dimensions of 8.9 x 6.6 x 10.9 inches. The frequency response ranges from 48Hz-35,000Hz, nominal impedance is 6 Ohms, sensitivity is 84 dB @ 2.83v/1m, crossover frequency is 2000Hz, and maximum power output (NOT RMS) is 80 watts.

Q: How many speakers come in the package?
A: The package contains a pair of speakers.

Q: Are these speakers rear ported?
A: Yes, they are rear ported.

Q: Can these speakers play loud without distorting?
A: These speakers can play up to around 86 db at 1 meter without distorting, which is pretty loud in an average-sized room.

Q: How many watts are these speakers?
A: These are passive 6 ohm speakers that can be run off pretty much any amp or receiver.

Q: Is this price for a pair of speakers?
A: Yes, this price is for a pair of bookshelf speakers.

Q: Why isn't this speaker on ELAC's website?
A: From what we have gathered, these speakers were made specifically to sell on Amazon to compete with other sub $200 speakers. They are part of the Debut 2.0 series but with unique 4" polypropylene drivers instead of the same hybrid material as the other woofers in the series.

Q: What do customers say about these speakers?
A: Customers have given these speakers a 4.6 out of 5-star rating with over 130 reviews. They have praised the speakers for their natural sound signature, strong bass, good imaging, and overall sound quality for the price. Some customers have also mentioned that they had to take apart and fix the speakers due to rattling caused by the speaker wire touching the rear port.