JENSEN® Portable Stereo Bluetooth CD Music System with Cassette and Digital AM/FM Radio - User Manual

Table of Contents

1. Getting Started
2. Bluetooth Pairing and Streaming
3. CD Playback
4. AM/FM Radio Operation
5. Cassette Playback and Recording
6. Setting the Clock and Alarm
7. Using the Remote Control
8. Troubleshooting Tips
9. Frequently Asked Questions

1. Getting Started

Before using your JENSEN CD-785 Portable Stereo Bluetooth CD Music System, ensure that the device is connected to a power source using the provided power cord. If you prefer to use battery power, insert 8 'D' (UM-1) batteries (not included) into the battery compartment located at the back of the unit.

2. Bluetooth Pairing and Streaming

To pair your Bluetooth-enabled device with the CD-785, follow these steps:

1. Turn on your Bluetooth-enabled device and ensure that it is in pairing mode.
2. Press the 'Mode' button on the CD-785 until 'BT' is displayed on the LCD screen.
3. On your Bluetooth-enabled device, search for available devices and select 'CD-785' from the list.
4. Once paired, the CD-785 will emit a confirmation tone and display 'BT' on the LCD screen.

3. CD Playback

To play a CD, follow these steps:

1. Press the 'Open/Close' button to open the CD compartment.
2. Place your CD (CD-R/RW compatible) onto the spindle with the label side facing up.
3. Close the CD compartment by pressing the 'Open/Close' button again.
4. Press the 'Mode' button until 'CD' is displayed on the LCD screen.
5. Press the 'Play/Pause' button to start playing the CD.

4. AM/FM Radio Operation

To use the AM/FM radio, follow these steps:

1. Press the 'Mode' button until 'AM' or 'FM' is displayed on the LCD screen.
2. Extend the antenna for optimal reception.
3. Use the 'Tuning' buttons to find your desired radio station.
4. To save a station as a preset, press and hold the 'Preset' button until the preset number flashes on the LCD screen. Use the 'Skip' buttons to select a preset number and press the 'Preset' button again to save the station.

5. Cassette Playback and Recording

To play a cassette tape, follow these steps:

1. Press the 'Eject' button to open the cassette compartment.
2. Insert your cassette tape with the open edge facing down and the side you want to play facing you.
3. Close the cassette compartment.
4. Press the 'Mode' button until 'TAPE' is displayed on the LCD screen.
5. Press the 'Play' button to start playing the cassette.

1. Insert a blank cassette tape as described above.
2. Select the desired source (AM/FM radio or AUX input) using the 'Mode' button.
3. Press the 'Rec' button to begin recording. The 'Play' button will be engaged automatically.

6. Setting the Clock and Alarm

To set the clock, follow these steps:

1. Press and hold the 'Clock' button until the hour digits flash on the LCD screen.
2. Use the 'Skip' buttons to set the correct hour and press the 'Clock' button again.
3. Repeat the process for setting the minutes.

1. Press and hold the 'Alarm' button until the hour digits flash on the LCD screen.
2. Use the 'Skip' buttons to set the desired alarm time and press the 'Alarm' button again.
3. Select the alarm source (radio, CD, or buzzer) using the 'Skip' buttons and press the 'Alarm' button to confirm.

7. Using the Remote Control

The included remote control allows you to control the CD-785 from a distance. Ensure that the CR2025 lithium battery is properly installed in the remote control. Point the remote control at the unit's infrared sensor and press the buttons to control various functions such as power, volume, playback, and mode selection.

8. Troubleshooting Tips

If you encounter issues while using your CD-785, try the following troubleshooting tips:

• Ensure that the unit is properly connected to a power source or has fresh batteries installed.
• Check that the selected mode (CD, radio, tape, or Bluetooth) corresponds to the desired source.
• For Bluetooth issues, ensure that your device is within the 33-foot range and is properly paired with the CD-785.
• For radio reception issues, extend the antenna and try adjusting its position.
• For CD playback issues, ensure that the CD is clean and free from scratches.

9. Frequently Asked Questions

Q: Can I connect my smartphone or tablet to the CD-785?
A: Yes, you can connect your smartphone or tablet using Bluetooth or the front-mounted auxiliary input jack.

Q: Can I use headphones with this unit?
A: Yes, there is a front-mounted stereo headphone jack for private listening.

Q: Can I power the unit with batteries?
A: Yes, the CD-785 can be powered by 8 'D' (UM-1) batteries (not included).

Q: How do I set the clock and alarm?
A: Follow the steps outlined in Section 6 of this user manual.

Q: Can I use the remote control to operate the unit from a distance?
A: Yes, the included remote control allows you to control various functions of the CD-785 from a distance.

Q: What are the connectivity options for the Jensen CD-785?
A: The Jensen CD-785 supports Bluetooth with A2DP and AVRCP, as well as a front-mounted auxiliary input jack for connecting smartphones, tablets, and other audio sources.

Q: Is the CD player compatible with CD-R/RW discs?
A: Yes, the CD player is compatible with CD-R/RW discs.

Q: What are some of the additional features of the Jensen CD-785?
A: The Jensen CD-785 includes a bass boost feature, a dual alarm clock with snooze function, and the ability to wake up to radio, alarm, or CD. It also has a front-mounted stereo headphone jack for private listening.

Q: How does the Jensen CD-785 receive radio signals?
A: The Jensen CD-785 has a built-in digital AM/FM radio with station presets and comes with an antenna.

Q: Can I record onto cassette tapes using this unit?
A: Yes, the cassette player is able to record from both CDs and other audio sources.

Q: How many CDs can be loaded into the Jensen CD-785 at once?
A: The Jensen CD-785 can hold one CD at a time.

Q: Does the unit come with an audio input jack?
A: No, there is no audio input jack on this unit. However, it does have an audio output for connecting external speakers or headphones.

Q: What type of power source does the Jensen CD-785 use?
A: The Jensen CD-785 can be powered by either 120V AC or 8 D batteries (not included).

Q: Is it possible to use a 12V DC converter with this unit?
A: Yes, it is possible to use a 12V DC converter with this unit as long as it converts power to AC power.

Q: Do I need Bluetooth to use this radio?
A: No, Bluetooth is not required to listen to regular radio stations. However, you can set up Bluetooth to use in conjunction with your smartphone to listen to Bluetooth on the radio from your phone.