Kraftwelle 4T Hydraulic Jack - Extra Flat - 75mm - 500mm - 3000kg

Brand: Kraftwelle
Model Number: ‎60010

User Manual for Kraftwelle Hydraulic Jack 4T

Product Overview

The Kraftwelle Hydraulic Jack is a high-quality, extra-flat, 3-ton capacity jack with a double hydraulic piston designed for quick and effortless lifting. It is suitable for use with a wide range of vehicles, including those with low clearance and those with higher chassis such as SUVs and vans.


  • Brand: Kraftwelle
  • Model Number: 60010
  • Minimum Height: 75 mm
  • Maximum Lifting Height: 500 mm
  • Capacity: 3 tons (3000 kg)
  • Total Length: 70 cm
  • Item Weight: 36 kg
  • Color: Grey, Orange, Black

Operating Instructions

  1. Ensure that the vehicle is on a flat, stable surface and the parking brake is engaged.
  2. Place wheel chocks behind the wheels opposite to the side you are lifting.
  3. Locate the vehicle's designated lifting points as per the vehicle manufacturer's guidelines.
  4. Position the jack so that the saddle is directly underneath the lifting point.
  5. Ensure that the jack is correctly aligned and the saddle will make contact with the lifting point securely.
  6. Pump the handle up and down to raise the jack. The double piston mechanism will allow for a quicker lift.
  7. Once the vehicle is lifted to the desired height, immediately place appropriate rated jack stands under the vehicle to support it.
  8. To lower the vehicle, slowly turn the release valve counterclockwise with the jack handle, allowing the vehicle to descend gently and safely.

Troubleshooting Tips

  • Jack Will Not Lift: Ensure that the release valve is fully closed by turning the handle clockwise. Check for any hydraulic fluid leaks.
  • Jack Lowers Unexpectedly: Do not exceed the rated capacity of 3 tons. Always use jack stands once the vehicle is lifted. Check the release valve for proper operation.
  • Difficulty in Pumping: Verify that the jack is on a flat surface and the saddle is correctly positioned under the lifting point. Lubricate the moving parts if necessary.


Is this jack suitable for vehicles with low clearance?

Yes, with a minimum height of 75 mm, this jack is ideal for vehicles with low clearance.

Can it lift heavier vehicles like SUVs?

Yes, it has a 3-ton capacity and a maximum lifting height of 500 mm, making it suitable for lifting SUVs and vans.

What is the total weight of the jack, and is it portable?

The jack weighs 36 kg. While it is heavy, it is still manageable for transportation within a garage or workshop.

Does it come with a rubber pad to protect the vehicle?

Yes, the jack includes a rubber pad on the saddle to help protect the vehicle during lifting.

How stable is this jack?

The Kraftwelle Hydraulic Jack is designed with stability in mind, but it should always be used on a flat, stable surface and supplemented with jack stands for safety.

Is the jack easy to use?

Yes, it features a double piston for easy lifting and a controlled release valve for safe lowering.

Is there customer support if I encounter issues?

If you have any issues with the Kraftwelle Hydraulic Jack, you can contact the seller or manufacturer for assistance.

What should I do if the jack does not maintain the lifted position?

First, ensure that the release valve is fully closed. If the problem persists, the jack may need hydraulic fluid or servicing.

Can I use this jack on an uneven surface?

It is not recommended to use the jack on an uneven surface as it could lead to instability. Always use the jack on a flat and stable surface.

How do I maintain this jack?

Regularly check for hydraulic fluid levels, inspect for leaks, and keep the moving parts lubricated.

What is the warranty for this jack?

Please refer to the manufacturer's documentation or contact customer service for warranty information.

Remember to always follow the vehicle manufacturer's guidelines and safety instructions when using a jack and to use jack stands to support the vehicle once lifted.

FAQ [continued]

Q: What is the maximum lifting capacity of the Kraftwelle Camion Cric hydraulique 4T?
A: The maximum lifting capacity of this hydraulic jack is 3 tonnes.

Q: What is the maximum lifting height of this jack?
A: The maximum lifting height is approximately 500 mm.

Q: Is this jack suitable for vehicles with a low ground clearance?
A: Yes, this jack is ideal for vehicles with a low ground clearance as it has a height of only 75 mm.

Q: Does this jack have a double piston hydraulic system?
A: Yes, this jack features a double piston hydraulic system for quick and effortless lifting.

Q: Is it safe to perform an oil change with this jack fully loaded?
A: Yes, thanks to the safety valve, it is safe to perform an oil change with this jack fully loaded.

Q: What are the dimensions and weight of this jack?
A: The total length on the ground is 70 cm and the total weight is 36 kg.

Q: Does the pump rod have any protective measures to prevent damage to the vehicle?
A: Yes, half of the pump rod is covered with foam rubber to prevent damage to the vehicle.

Q: Is this jack suitable for SUVs, vans, and vehicles with a high chassis?
A: Yes, with its maximum lifting height of approximately 500 mm, this jack is suitable for SUVs, vans, and vehicles with a high chassis.

Q: What are the color options available for this jack?
A: The color options available are gray, orange, and black.

Q: Is there any warranty provided by the manufacturer?
A: The product does not specify any warranty information. Please check with the manufacturer or seller for warranty details.


Model Number‎60010
CategoryAuto et Moto > Outils et dépannage > Équipements garage et atelier > Élévateurs, grues d'atelier et crics > Crics de levage
Poids de l'article‎36 Kilograms
Poids de l'article‎36 kilogrammes
Référence constructeur‎60010
Numéro de série fabricant‎60010
Moyenne des commentaires client4,6 4,6 sur 5 étoiles 656 évaluations 4,6 sur 5 étoiles
Classement des meilleures ventes d'Amazon10,821 en Auto et Moto (Voir les 100 premiers en Auto et Moto) 48 en Crics de levage
Date de mise en ligne sur Amazon.fr17 mars 2021
Charge maximale3 ton
Hauteur maximale de soulèvement500 Millimètres
Weight‎36 kilogrammes
First Available17 mars 2021

The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.