REDTIGER F7N Dash Cam Hardwire Kit
REDTIGER F7N Dash Cam Hardwire Kit User Manual
Product Overview
The REDTIGER F7N Dash Cam Hardwire Kit allows for a clean and permanent installation of your dash cam or other Type-C port powered devices in your vehicle. This kit converts 12V-24V to a steady 5V/2.5A output and includes a low voltage protection feature to safeguard your vehicle's battery.
Installation Instructions
Before You Begin
- Ensure your vehicle's engine is off and keys removed from the ignition.
- Identify the fuse box location in your vehicle.
- Determine the size of the fuses used in your vehicle (e.g., mini, micro).
Installation Steps
- Preparing the Hardwire Kit: If necessary, cut off the integrated fuses and use a fuse tap that matches your vehicle's fuse size. Crimp or solder the wires to the fuse tap, ensuring proper insulation.
- Grounding the Kit: Connect the black wire from the hardwire kit to a grounding point in your vehicle. This is usually a metal part of the vehicle's frame.
- Connecting to the Fuse Box: Use a multimeter to identify a constant (always on) and a switched fuse slot. Connect the yellow wire to the constant fuse slot and the red wire to the switched fuse slot using the fuse taps.
- Routing the Cable: Neatly route the Type-C cable from the fuse box to the dash cam's mounting location, ensuring it does not obstruct any airbags or impede the vehicle's operation.
- Connecting to the Dash Cam: Plug the Type-C connector into the dash cam.
- Testing the Installation: Start the vehicle to ensure the dash cam powers on with the ignition and switch off the vehicle to test the parking mode feature.
Final Checks
Secure any loose cables with zip ties and ensure the fuse box cover can be replaced without pinching any wires. Confirm that the dash cam operates as expected in both driving and parking modes.
Troubleshooting Tips
- If the dash cam does not power on, check all connections, including the ground and fuse taps, for secure and correct placement.
- Ensure the fuses used in the fuse taps are the correct amperage; a 3 amp fuse is recommended.
- Verify that the fuse taps are installed in the correct orientation with the line side matching the constant voltage side of the fuse socket.
- If parking mode does not function, ensure the yellow wire is connected to a constant power source and the red wire to a switched power source.
Frequently Asked Questions (FAQ)
What type of fuse should I use with this hardwire kit?
It is recommended to use a 3 amp fuse with the fuse tap for each connection in the kit to prevent the fuse from blowing too easily.
How do I know which side is the line side of the fuse tap?
Use a multimeter or test light to determine the line side. Connect one side of the multimeter to ground and the other to one side of the fuse socket. The side that shows approximately 12 volts is the line side. Make sure to match the line side of the fuse tap with the line side of the fuse socket.
Can I connect the hardwire kit directly to the fuse legs?
It is not recommended to connect the hardwire kit directly to the fuse legs. This can cause incorrect wiring and potential safety hazards. Use a fuse tap to ensure proper and safe installation.
Is the hardwire kit compatible with trucks over 24V?
No, the REDTIGER F7N Dash Cam Hardwire Kit is not applicable to trucks with a voltage above 24V. It is designed for vehicles with a 12V-24V electrical system.
What should I do if my dash cam is not entering parking mode as expected?
Ensure that your vehicle's ACC is on before attempting to enter the parking mode settings. If ACC is not on, you will receive an error message, and the parking mode will be automatically turned off.
Does this hardwire kit fit all dash cams?
This hardwire kit is designed specifically for REDTIGER dash cams and may not be compatible with other brands or models. Verify compatibility before purchasing.
What if the hardwire kit or dash cam malfunctions?
Contact REDTIGER customer service for support. The product comes with a 1-year free-replacement warranty for quality problems.
For further assistance or more detailed information, refer to the product manual or contact REDTIGER customer service.
FAQ [continued]
Q: What is the length of the Type C hardwire kit?A: The Type C hardwire kit has a length of 11.5ft.
Q: What is the voltage input range supported by the hardwire kit?
A: The hardwire kit supports voltage input from 12V to 24V.
Q: Does the hardwire kit provide continuous power supply for 24 hours?
A: Yes, the hardwire kit can provide continuous power supply for 24 hours by connecting it to the car battery or fuse box power.
Q: Does the hardwire kit have low voltage protection?
A: Yes, the hardwire kit has low voltage protection. It will automatically cut off the power after 60 seconds when the voltage is lower than 11.8V (+-0.2).
Q: What other security protections does the hardwire kit have?
A: The hardwire kit also provides over-current protection, short-circuit protection, reverse connection protection, and overheat protection.
Q: Is there any warranty provided for the hardwire kit?
A: Yes, there is a 1-year free-replacement warranty for quality problems.
Q: What are the dimensions and weight of the product?
A: The product dimensions are 5.7 x 2.7 x 1.7 inches and it weighs 3.52 ounces.
Q: What is the video capture resolution supported by the hardwire kit?
A: The hardwire kit supports video capture resolution up to 2160p.
Q: Does the package include batteries?
A: No, batteries are not included in the package.
Q: What is the real angle of view provided by the dash cam when using this hardwire kit?
A: The dash cam provides a real angle of view of 140 degrees.
Please note that these FAQs are based on the provided product details and customer reviews.
Specifications
| Brand | REDTIGER |
| Manufacturer | REDTIGER |
| Category | Electronics > Car & Vehicle Electronics > Car Electronics > Car Video > On-Dash Cameras |
| Product Dimensions | 5.7 x 2.7 x 1.7 inches |
| Item Weight | 3.52 ounces |
| ASIN | B092Z6GN96 |
| Customer Reviews | 4.3 out of 5 stars 1,259 ratings 4.3 out of 5 stars |
| Best Sellers Rank | #1,996 in Electronics |
| Other display features | CE |
| Colour | Type C port-Hardwire Kit |
| Date First Available | April 20, 2021 |
| Model Name | Single fuse |
| Video Capture Resolution | 2160p |
| Color | Type C port-Hardwire Kit |
| Product Dimensions | 2.7"D x 5.7"W x 1.7"H |
| Auto Part Position | Rear |
| Are Batteries Included | No |
| Real Angle of View | 140 Degrees |
| Weight | 3.52 ounces |
| Dimensions | 2.7"D x 5.7"W x 1.7"H |
| First Available | April 20, 2021 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.