Tesoorda LED Flame Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Device Overview
4. Getting Started
5. Bluetooth Connection
6. LED Flame Effect
7. Battery and Charging
8. Troubleshooting Tips
9. Frequently Asked Questions

1. Introduction

Welcome to the Tesoorda LED Flame Speaker, a 3-in-1 portable Bluetooth speaker, flame lamp, and LED night light. This versatile speaker is perfect for creating the perfect atmosphere for parties, BBQs, camping, or as a warm night light for your yard, garden, and bedroom. With its outstanding sound performance, long battery life, and IP65 waterproof rating, this speaker is sure to become your go-to device for both indoor and outdoor activities.

2. Package Contents

• Tesoorda LED Flame Speaker
• Type-C USB Charging Cable
• User Manual

3. Device Overview

• LED Flame Effect with 120 LEDs
• 5W Speaker Driver
• 3600mAh Rechargeable Battery
• IP65 Waterproof and Dustproof Rating
• Bluetooth 5.0 Connectivity
• Faux Leather Strap for Easy Carrying

4. Getting Started

1. Charge the speaker using the included Type-C USB cable. The LED indicator will turn red when charging and will turn off when fully charged.
2. Press and hold the power button for 3 seconds to turn on the speaker. The speaker will make a sound, indicating that it is powered on and ready for pairing.
3. Enable Bluetooth on your device and search for available devices.
4. Select "Tesoorda LED Flame Speaker" from the list of available devices to pair.
5. Once connected, you can start playing music or other audio content from your device.

5. Bluetooth Connection

The Tesoorda LED Flame Speaker uses Bluetooth 5.0 for easy and stable connections. To connect to a new device, simply turn off Bluetooth on the currently connected device and follow the steps in the "Getting Started" section with the new device. To pair two speakers for superior stereo sound, follow the same steps as above but with both speakers turned on and in close proximity to each other.

6. LED Flame Effect

Press the flame button to activate the LED flame effect. The 120 LEDs will create a flickering, warm, and romantic atmosphere. Press the button again to turn off the flame effect.

7. Battery and Charging

The Tesoorda LED Flame Speaker comes with a built-in 3600mAh rechargeable battery, providing up to 18 hours of playtime. To charge the speaker, connect the included Type-C USB cable to the charging port on the speaker and a USB power source. The LED indicator will turn red when charging and will turn off when fully charged.

8. Troubleshooting Tips

• Unable to connect to Bluetooth: Make sure the speaker is turned on and in pairing mode. Ensure that your device's Bluetooth is enabled and that it is within range of the speaker. If the issue persists, try restarting both the speaker and your device.
• Poor sound quality: Ensure that the speaker is not obstructed or covered. Check the audio source and try playing different audio content to see if the issue persists. If the problem continues, it may be a hardware issue.
• Speaker not turning on: Make sure the speaker is charged. If the speaker still does not turn on, try charging it with a different USB cable and power source.

9. Frequently Asked Questions

Q: Can I use the speaker while it is charging?

A: Yes, you can use the Tesoorda LED Flame Speaker while it is charging. However, this may affect the overall battery life and charging time.

Q: Can I connect the speaker to multiple devices at once?

A: The speaker can only be connected to one device at a time. To switch between devices, disconnect the currently connected device and follow the pairing steps with the new device.

Q: Is the speaker compatible with all Bluetooth devices?

A: The Tesoorda LED Flame Speaker is compatible with most Bluetooth-enabled devices. If you experience any compatibility issues, please contact customer support for assistance.

Q: Can I use the speaker in wet conditions?

A: The speaker has an IP65 waterproof and dustproof rating, making it suitable for use in wet conditions. However, it is not recommended to submerge the speaker in water.

Q: What is the max brightness of the speaker if I don't want it to be a flame?
A: The speaker has an orange bug light brightness if you don’t want to use the flame.

Q: Can this be mounted to a patio wall with a command hook? How does the hook it comes with mount?
A: The speaker does not come with a hook, but it has a loop at the top for carrying or hanging. It can be hung from a patio wall with a command hook, depending on the climate. However, it may not withstand extreme heat.

Q: How do I connect my cell phone to the speaker? Is there an app I need to download?
A: No app is needed to connect your cell phone to the speaker. Simply turn on the speaker's Bluetooth switch and your phone's Bluetooth, then search for "AJ100" and connect.

Q: How long does the battery last and is it rechargeable?
A: The speaker has a rechargeable 3600mA battery that offers up to 18 hours of playtime when fully charged.

Q: How do I troubleshoot if one speaker takes sound from the other?
A: This is how Bluetooth speakers work. Once paired, whatever plays on your phone will only play through the portable speaker. Make sure both speakers are fully charged and try again.

Q: How do I get two speakers to play at the same time?
A: Press and hold the power button of one of the speakers twice until you hear a "didi" sound. This means the two speakers are successfully paired and connected. Then turn on Bluetooth on your device and connect to "AJ100".

Q: What is the Bluetooth range?
A: The Bluetooth range is 33ft.

Q: Will the speaker connect to my computer?
A: Yes, if your computer has Bluetooth function, you can connect the speaker.

Q: How do I activate flicking and night light mode on this model?
A: Tap the light button once to activate the flicking flame mode, and tap it again to activate the solid-on lighting mode (LED night light mode). Long press the lighting button to adjust the brightness of the light. To turn off the light, press the light button again.