BOUSNIC Dog Shock Collar with Remote - Rechargeable & Waterproof.
The Bousnic Dog Shock Collar with Remote is a professional, humane, and innovative tool that helps you train your dog to behave better, making your life happier. The package inclu…
Manual and instructions
Instruction-focused content generated from the current product data and source context.
Bousnic Dog Shock Collar with Remote User Manual
Package Contents
- 1 x Remote
- 2 x Receivers
- 1 x Charging Cable
- 1 x Test Lamp
- 1 x User Manual
- 4 x Rubber Caps
Getting Started
- Charge the remote and receivers for 2 hours before initial use. The remote and receivers are equipped with lithium-ion batteries. The remote typically lasts for 30 days, while the receivers last for about 15 days.
- Adjust the collar length to fit your dog's neck size (7-27 inches). Use the tri-glide slide to adjust the collar length. Slide and thread the strap into the hole of the tri-glide slide to fix the collar length.
- Attach the receiver to the collar by threading the strap through the loops on the receiver.
- Place the collar on your dog's neck, ensuring the receiver is positioned on the front side of the neck, below the dog's chin. Make sure the collar is snug but not too tight. You should be able to fit one finger between the collar and your dog's neck.
Using the Remote
- Turn on the remote by pressing and holding the power button for 3 seconds. The LCD screen will display the current mode, intensity level, and battery status.
- Select the desired training mode (beep, vibration, or shock) by pressing the mode button.
- Adjust the intensity level for vibration and shock modes using the +/- buttons. There are 16 intensity levels for shock mode.
- Press the corresponding button (beep, vibration, or shock) to send a signal to the receiver. The remote can control up to 2 receivers simultaneously.
- Use the security keypad lock to prevent accidental mis-operation. Slide the lock button to lock or unlock the remote.
Training Tips
- Start with the lowest intensity level and gradually increase it as needed.
- Use the beep or vibration mode first before using the shock mode.
- Be consistent and use verbal commands in conjunction with the collar to reinforce desired behaviors.
- Do not use the collar for excessive punishment or continuous stimulation. Limit training sessions to 10-15 minutes per day.
Troubleshooting
Remote or Receiver Not Turning On
- Ensure the remote and receiver are fully charged.
- Check for any damage to the charging port or cable.
Remote Not Controlling Receiver
- Ensure the remote and receiver are turned on and within the 1000ft range.
- Check for any obstacles or interference that may be affecting the signal.
Receiver Not Responding to Commands
- Ensure the collar is properly fitted and the receiver is in contact with your dog's skin.
- Adjust the intensity level if necessary.
- Check the receiver for any damage or malfunctions.
FAQs
- What is the range of the Bousnic Dog Shock Collar?
The Bousnic Dog Shock Collar has a range of up to 1000ft, allowing you to train your dog in various environments such as parks, beaches, and backyards. - Is the Bousnic Dog Shock Collar waterproof?
Yes, the Bousnic Dog Shock Collar is IPX7 waterproof, making it suitable for use in all weather conditions and even when your dog is swimming. However, the remote is not waterproof, so keep it away from water. - Can I use the Bousnic Dog Shock Collar on small dogs?
Yes, the Bousnic Dog Shock Collar is suitable for dogs weighing 10-120lbs and with neck sizes between 7-27 inches. The collar is adjustable to ensure a comfortable fit for your dog. - How do I charge the Bousnic Dog Shock Collar?
Use the included charging cable to charge the remote and receivers. Both the remote and receivers can be charged simultaneously. A full charge takes about 2 hours. - What is the purpose of the test lamp?
The test lamp is used to test the shock function of the collar. Attach the test lamp to the receiver's contact points and activate the shock mode to ensure it is functioning properly.
Frequently asked questions
Q: What is included in the package of the Bousnic Dog Shock Collar with Remote?
A: The package includes 1 remote, 2 receivers, 1 charging cable, 1 test lamp, 1 user manual, and 4 rubber caps.
Q: What makes the Bousnic Dog Training Collar a perfect training tool?
A: The Bousnic Dog Training Collar is a perfect training tool because it has been designed to be humane, effective, and harmless. It has 3 modes of training (beep/vibration/shock) that you can choose from based on what works best for your dog. It also has adjustable static correction levels and a smaller, thinner, and more lightweight receiver that fits comfortably on your dog's neck.
Q: Is the Bousnic Dog Shock Collar waterproof?
A: Yes, the Bousnic Dog Shock Collar is IPX7 waterproof rated. The receiver works great even when your dog swims in the sea/river/pool, and you can feel safe letting your dog bathe in the tub or run in the rain. However, the remote is not waterproof, so it should be kept away from water.
Q: What is the range of the Bousnic Dog Shock Collar?
A: The range of the Bousnic Dog Shock Collar is up to 1000ft. The signal is stronger and steadier, allowing you to train your dog in a spacious area like a backyard, park, or beach without losing control.
Q: Can I adjust the collar strap length for my small puppy?
A: Yes, you can adjust the collar strap length for your small puppy by sliding the tri-glide slide on the strap to a proper position to adjust the collar length and sliding and threading the strap into the hole of the tri-glide slide to fix the collar length. The collar fits superb for dogs 10-120 lbs, whose neck size is 7-27 inches.
Q: How do I replace the rubber replacements for the contact points?
A: The rubber replacements for the contact points can be replaced easily by sliding them off and sliding on new ones.
Q: Can I send the signal to each dog individually with the Bousnic Dog Shock Collar?
A: Yes, you can send the signal to each dog individually with the Bousnic Dog Shock Collar. There is an A/B slider switch on the side of the remote that allows you to send the signal to the dog you want to pay attention to.
Q: How long does it take to charge the Bousnic Dog Shock Collar?
A: With the latest battery technology, Bousnic remote control shock collars for dogs can get a quick burst of charge in just 2 hours. Typically used, the shocking collar for dogs can last for 15 days, while the remote can last for 30 days.
Overall, the Bousnic Dog Shock Collar with Remote is a great training tool that can help you regain control of your dog's behavior. It has 3 humane and effective modes of training, a smaller and more lightweight receiver that fits comfortably on your dog's neck, and is waterproof and has a range of up to 1000ft. It also charges quickly and easily and can be adjusted to fit small puppies or larger dogs.
Specifications
Structured product details pulled from the latest available product data.
| Brand | BOUSNIC |
|---|---|
| Manufacturer | Bousnic |
| Category | Pet Supplies > Dogs > Collars, Harnesses & Leashes > Collars > Electronic Training Collars |
| First Available | May 14, 2021 |
| Package Dimensions | 7.91 x 6.54 x 1.85 inches; 12.63 Ounces |
| Batteries | 3 Lithium Ion batteries required. (included) |
| Date First Available | May 14, 2021 |
| ASIN | B094ZL2M1G |
| Best Sellers Rank | See Top 100 in Pet Supplies |
Use this page carefully
ProductReviewGPT pages are AI-assisted summaries. When a source document is available, it should take priority over the generated summary for important operating, warranty, safety, or compliance details.