Elgato Wave Mic Arm User Manual

Table of Contents

1. Package Contents
2. Assembly and Installation
3. Adjusting the Arm
4. Adding the Extension Riser
5. Attaching the Counterweight
6. Cable Management
7. Frequently Asked Questions

1. Package Contents

Your Elgato Wave Mic Arm package should include the following items:

• Elgato Wave Mic Arm
• Desk clamp
• Ball head with 1/4" screw and 3/8"-5/8" adapters
• Extension riser
• Custom counterweight
• Allen wrench

2. Assembly and Installation

1. Attach the desk clamp to the edge of your desk. Make sure the clamp is tightened securely.
2. Insert the bottom end of the Elgato Wave Mic Arm into the desk clamp and tighten the screw to secure it in place.
3. Attach the ball head to the top end of the mic arm using the 1/4" screw or the appropriate adapter for your microphone.
4. Mount your microphone onto the ball head and tighten it securely.

3. Adjusting the Arm

To adjust the position of the Elgato Wave Mic Arm, simply move it to your desired position. The arm is designed to maintain its position when adjusting the height and angle.

4. Adding the Extension Riser

If you need additional height, attach the extension riser to the top end of the mic arm before attaching the ball head. This will add an extra 150 mm / 5.9 in of height.

5. Attaching the Counterweight

If your microphone is too light, attach the custom counterweight to the mic arm to adapt the arm tension to the mic weight. This will help maintain the position of the arm when adjusting the height.

6. Cable Management

Run your microphone cable through the hidden cable channels in the Elgato Wave Mic Arm for a clean and organized setup.

7. Frequently Asked Questions

Q: What is the weight capacity of the Elgato Wave Mic Arm?

A: The Elgato Wave Mic Arm supports microphones weighing between 250 - 1,000 g / 0.55 - 2.2 lbs.

Q: Can the Elgato Wave Mic Arm be used with non-Elgato microphones?

A: Yes, the Elgato Wave Mic Arm is compatible with most microphones, as it comes with 1/4" screw and 3/8"-5/8" adapters to accommodate different microphone mounts.

Q: How do I adjust the tension of the Elgato Wave Mic Arm?

A: The custom counterweight included with the Elgato Wave Mic Arm allows you to adapt the arm tension to the weight of your microphone. Attach the counterweight if your microphone is too light to maintain the position of the arm when adjusting the height.

Q: Can I use the Elgato Wave Mic Arm with a shock mount?

A: Yes, you can attach a shock mount to the ball head of the Elgato Wave Mic Arm using the appropriate adapter.

Product FAQ:

Q: What is included in the Elgato Wave Mic Arm package?
A: The package includes the Elgato Wave Mic Arm, a desk clamp, 1/4" thread adapters, and an extension riser.

Q: How much weight can the Elgato Wave Mic Arm support?
A: The mic arm can support mics weighing 250 - 1,000 g / 0.55 - 2.2 lbs.

Q: Is the Elgato Wave Mic Arm compatible with the Blue Snowball microphone?
A: Yes, the Elgato Wave Mic Arm can accommodate the weight of the Blue Snowball microphone as it falls within the supported weight range.

Q: Does the Elgato Wave Mic Arm come with a microphone?
A: No, this listing does not come with a microphone.

Q: Can the Elgato Wave Mic Arm pick up keyboard noises when using the low profile arm?
A: Any microphone could potentially pick up keyboard noises when using any type of low profile arm. To prevent such noises, you may need to use third party software/mixers to adjust your mic sensitivity.

Q: Will it work with the audio-technica at2020usb+?
A: Yes, the Elgato Wave Mic Arm is compatible with audio-technica at2020usb+ as it utilizes 1/4", 3/8", and 5/8-inch mounting threading.

Q: Does it come with an alternative c-clamp for thicker desks?
A: No, there are no alternate C-clamp individuals/adaptors for other types of desks available at this time.

Q: Does the Elgato Wave Mic Arm come with a shock mount or is one needed for certain microphones?
A: The Elgato Wave Mic Arm does not come with a shock mount. However, it provides standard thread connections that should not be a problem to mount any mic holder.

Q: What is the length of each arm?
A: The base to elbow is 13 inches, while the elbow to ball mount/socket is 15 inches.

Customer Reviews:

- "Boom. King of this category, and fantastic value."
- "Makes my Rode PSA-1 seem cheap."
- "Great Mic Arm"
- "Solid and sturdy"
- "A Beast"
- "Just quality"
- "Great item. However I paid for a new product, this was opened and missing parts."
- "Beide Varianten (High Rise und LP) versprechen mehr als sie am Ende halten können.