Newentor Atomic Projection Alarm Clock with Weather Station User Manual

Package Contents

• 1 x Projection Alarm Clock
• 1 x Wireless Remote Sensor
• 1 x DC Power Cord
• 1 x CR2032 Battery
• 1 x User Manual

Setting Up the Alarm Clock

1. Connect the DC power cord to the projection alarm clock and plug it into a power outlet.
2. Insert the included CR2032 battery into the battery compartment on the back of the alarm clock.
3. Press and hold the "SET" button for 3 seconds to enter the time setting mode. Use the "+" and "-" buttons to adjust the time, date, and other settings as needed. Press the "SET" button again to confirm your selections.
4. Select the correct time zone for your location using the "+" and "-" buttons. The available time zones are -4 AST, -5 EST, -6 CST, -7 MST, -8 PST, -9 AKT, and -10 HAT.

Setting Up the Wireless Remote Sensor

1. Insert 2 x AA batteries (not included) into the battery compartment of the wireless remote sensor.
2. Mount the sensor vertically on a North-facing wall or in a well-shaded location to avoid direct sunlight and rain. Recommended placement is 6 inches below eaves or under a deck rail.
3. Ensure that the sensor is within 328 ft (100 meters) of the base station in open air, without walls or floors in between.

Using the Projection Feature

1. Press the "PROJECTION" button on the top of the alarm clock to turn on the projection feature. The time and temperature will be projected onto the ceiling or wall.
2. Press the "PROJECTION" button again to switch between the two brightness levels (high and low) of the projection light.
3. Use the rotating wheel on the side of the alarm clock to adjust the projection angle and flip the projection 180° if needed.

Setting Dual Alarms

1. Press the "AL1" or "AL2" button to enter the alarm setting mode for the respective alarm.
2. Use the "+" and "-" buttons to set the desired alarm time. Press the "AL1" or "AL2" button again to confirm your selection.
3. To activate or deactivate an alarm, press and hold the corresponding "AL1" or "AL2" button for 3 seconds.

Troubleshooting Tips

• If the outdoor temperature is not displaying correctly, ensure that the sensor is placed in a well-shaded location away from direct sunlight and rain.
• If the atomic clock does not sync automatically, try placing the alarm clock closer to a window or moving it to a different location within your home.
• If the projection feature is not working properly, check that the CR2032 battery is installed correctly and replace it if necessary.

Frequently Asked Questions

Can I connect multiple outdoor sensors to the alarm clock?

Yes, the Newentor weather clock can connect up to 3 outdoor sensors to monitor the temperature and humidity in different locations. The package includes 1 remote sensor.

How do I adjust the brightness of the projection and screen?

Press the "PROJECTION" button to switch between the two brightness levels of the projection light. The screen has 4 brightness levels, which can be adjusted using the "+" and "-" buttons.

Does the alarm clock automatically adjust for Daylight Saving Time?

No, the alarm clock needs to be manually adjusted for Daylight Saving Time. To do this, enter the time setting mode by pressing and holding the "SET" button for 3 seconds, and then use the "+" and "-" buttons to adjust the time accordingly.

Why is the projected image not clear or visible?

Make sure the projection feature is turned on by pressing the "PROJECTION" button. If the image is still unclear, adjust the projection angle using the rotating wheel on the side of the alarm clock, and make sure the CR2032 battery is installed correctly and not depleted.

Q: What is the Newentor Atomic Projection Alarm Clock with Weather Station?
A: The Newentor Atomic Projection Alarm Clock with Weather Station is a multifunctional clock that displays time, indoor and outdoor temperature, and humidity. It also features dual alarms and a projection function that projects the time and temperature onto the ceiling or wall.

Q: How does the atomic clock function work?
A: The atomic clock function searches for WWVB signals to automatically update the time and date after selecting the correct time zone according to your location. Locations with weak signals can manually set the time and date.

Q: Can I project both indoor and outdoor temperature at the same time?
A: No, the projection will show time and indoor temperature for several seconds, then will show time and outdoor temperature for several seconds. It does not show all three at the same time without blinking and changing.

Q: Can I set the clock to display in 24-hour mode?
A: Yes, you can choose to display 12-hour clock or 24-hour clock according to your preferences.

Q: Does it come with a remote sensor for outdoor temperature monitoring?
A: Yes, it comes with one wireless remote sensor for outdoor temperature monitoring. You can connect up to three sensors to monitor different areas.

Q: Is it wall mountable?
A: No, it is not wall mountable as it is designed as a projection alarm clock. It is recommended to place it on a desktop.

Q: Does it have a radio?
A: No, it does not have a radio.

Q: What kind of power supply does it use?
A: It uses a 120V AC power supply that delivers 5V DC to the unit. Additionally, there is a silver oxide button battery that supplies power when the 120V supply is disconnected.

Q: Can I disable daylight savings time?
A: Yes, you can disable daylight savings time by turning off the DST function.

Q: Is it a good gift option?
A: Yes, the unique design and multiple functions of the projection atomic clock make it a suitable gift for Father's Day, Mother's Day, Christmas, Valentine's Day, and Birthday.