Pyle Portable Bluetooth PA Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Getting Started
4. Bluetooth Pairing
5. Playing Music
6. Karaoke and Microphone Use
7. LED Party Lights
8. Charging the Battery
9. Troubleshooting
10. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Pyle Portable Bluetooth PA Speaker. This user manual will guide you through the setup and operation of your new speaker system. Please read the instructions carefully before using the product and keep this manual for future reference.

2. Package Contents

• Pyle Portable Bluetooth PA Speaker
• Wireless Microphone
• Remote Control
• Power Adapter
• User Manual

3. Getting Started

Place the Pyle Portable Bluetooth PA Speaker on a flat, stable surface. Connect the power adapter to the speaker and plug it into an electrical outlet. Turn on the speaker by pressing the power button located on the back panel.

4. Bluetooth Pairing

1. Enable Bluetooth on your device (smartphone, tablet, or computer).
2. Select the "PPHP2645B" from the list of available devices.
3. Once connected, the LED display will show "BT" to indicate a successful Bluetooth pairing.

5. Playing Music

You can play music from various sources:

• Bluetooth: After pairing your device, play music using your device's media player.
• USB/SD: Insert a USB flash drive or SD card containing MP3 files into the respective slot. Use the control buttons on the speaker or the remote control to play, pause, and navigate through tracks.
• FM Radio: Press the "MODE" button until the LED display shows "FM." Use the remote control or the speaker's control buttons to tune in to your desired radio station.
• AUX: Connect an external audio source (such as an MP3 player or smartphone) to the speaker using a 3.5mm audio cable. Press the "MODE" button until the LED display shows "AUX."

6. Karaoke and Microphone Use

1. Insert the included wireless microphone's 6.5mm plug into the speaker's microphone input.
2. Turn on the microphone by pressing the power button.
3. Adjust the microphone volume using the "MIC VOL" knob on the speaker.
4. Start singing or speaking into the microphone while playing music.

7. LED Party Lights

Press the "LIGHT" button on the speaker or remote control to activate the multi-color flashing disco LED lights. Press the button again to cycle through different lighting modes or to turn the lights off.

8. Charging the Battery

When the battery is low, the LED display will show "LOW BATT." To recharge the battery, connect the power adapter to the speaker and plug it into an electrical outlet. The LED display will show "CHG" while charging and "FULL" when the battery is fully charged.

9. Troubleshooting

No power

Ensure the power adapter is properly connected to both the speaker and an electrical outlet. Check if the outlet is functioning properly.

No sound

Check the volume level on both the speaker and your connected device. Ensure the correct input mode is selected (Bluetooth, USB/SD, FM, or AUX).

Bluetooth connection issues

Ensure your device's Bluetooth is enabled and within range of the speaker. Try disconnecting and reconnecting the Bluetooth connection.

Microphone not working

Check if the microphone is turned on and properly connected to the speaker. Adjust the microphone volume using the "MIC VOL" knob.

10. Frequently Asked Questions

What is the battery life of the Pyle Portable Bluetooth PA Speaker?

The speaker has a built-in 7.4V, 3000mAh rechargeable battery that provides hours of playtime. Battery life may vary depending on usage and volume levels.

Can I connect two Pyle Portable Bluetooth PA Speakers together for stereo sound?

Yes, the speaker features TWS (True Wireless Stereo) function, allowing you to pair two speakers together for a full-range surround stereo sound experience.

Can I use the speaker while it is charging?

Yes, you can use the speaker while it is connected to the power adapter and charging.

Is the speaker waterproof?

The Pyle Portable Bluetooth PA Speaker is not waterproof. It is designed for indoor and outdoor use, but avoid exposing it to water or moisture.

Q: What is the power output of the Pyle Portable Bluetooth PA Speaker?
A: The Pyle Portable Bluetooth PA Speaker has a peak power output of 240 watts.

Q: Is this speaker compatible with Bluetooth devices?
A: Yes, this loudspeaker system is compatible with Bluetooth for wireless audio streaming and works with devices like iPhone, Android mobile phone, iPad, tablet, PC. It is ideal for personal indoor home and outdoor use.

Q: Does this speaker have a digital LED display?
A: Yes, the Pyle Bluetooth Speaker Karaoke PA system is equipped with FM Radio with digital LED display, USB flash drive & SD card reader to serve as an MP3 player, 3.5mm AUX in, and 6.5mm microphone input.

Q: Does this speaker have flashing DJ lights?
A: Yes, the Bluetooth party speaker with lights features multi-color flashing disco LED lights that will add life to any occasion which is great for patio parties or gatherings at night when a colorful presence is noticeable.

Q: Is the Pyle Portable Bluetooth PA Speaker rechargeable?
A: Yes, these Pyle PA wireless speakers with Bluetooth are great for karaoke, stage performances, & crowd control. It is fully portable w/ a built-in 7.4V，3000mAh rechargeable battery and convenient carry handle.

Q: Can I connect two of these speakers together to play simultaneously from my phone?
A: Yes, using the TWS function.

Q: Does this speaker have a port on the bottom or back to use a stand/mount?
A: The speaker does not have a specific port for mounting but can be placed on any flat surface.

Q: Can I use an additional wired mic (3/4 inch audio cable) while using the included wired mic?
A: Yes, you can use an additional wired mic by using a Y cable.

Q: How much does the Pyle Portable Bluetooth PA Speaker weigh?
A: The speaker weighs around 9.92 pounds.

Q: Can I connect this speaker to a TV, tablet, or laptop for karaoke?
A: Yes, you can connect via the aux in port.

Q: Does this speaker require a wall outlet to work or is it Bluetooth?
A: You plug it into the wall to charge but Bluetooth should work and hook up either way. Plugged or unplugged.