User Manual: HKZOOI Dog Training Collar

Package Contents

• 1x Remote Transmitter
• 2x Receiver Collar
• 2x Adjustable Collar Belt
• 1x Test Light
• 2x USB Charging Cable
• 1x User Operating Guide

Charging the Remote and Receiver Collar

1. Connect the USB charging cable to the remote transmitter and receiver collar charging ports.
2. Plug the other end of the USB charging cable into a power adapter, power bank, or laptop.
3. Allow the remote and receiver collar to charge for 2-3 hours or until fully charged.
4. Unplug the USB charging cable once charging is complete.

Preparing the Collar for Use

1. Adjust the collar belt to fit your dog's neck size (8 to 25 inches).
2. Attach the receiver collar to the adjustable collar belt.
3. Ensure the silicone-covered prongs are in contact with your dog's skin, but not too tight. The collar should not be worn for more than 12 hours per day.

Using the Remote Transmitter

1. Turn on the remote transmitter and receiver collar by pressing and holding the power button on each device.
2. Select the desired channel (1 or 2) on the remote transmitter to control the corresponding receiver collar.
3. Choose the appropriate training mode: beep, vibration, or shock.
4. Adjust the intensity level of the vibration or shock mode as needed (0-5).
5. Press the corresponding button on the remote transmitter to activate the chosen training mode.
6. Double-click the shock button to switch from beep or vibration mode to shock mode.

Troubleshooting Tips

• If the remote transmitter or receiver collar is not responding, ensure both devices are charged and turned on.
• Make sure the receiver collar is properly fitted to your dog's neck and the silicone-covered prongs are in contact with the skin.
• Check the remote transmitter's channel selection to ensure you are controlling the correct receiver collar.
• If the shock mode is not working, double-click the shock button to activate it.
• For issues not resolved by these troubleshooting tips, refer to the User Operating Guide or contact the manufacturer for assistance.

FAQ

How do I switch between controlling two dogs with the remote transmitter?

Select the desired channel (1 or 2) on the remote transmitter to control the corresponding receiver collar. The remote has a 1+2 channel design, allowing you to train two dogs at the same time without resetting it.

What is the appropriate intensity level for the shock mode?

Start with the lowest setting (0 or 1) and gradually increase the intensity if needed. It is recommended not to use the shock mode above level 2 as higher levels may be too intense for your dog.

How long does the battery last on the remote transmitter and receiver collar?

The remote transmitter can last up to 90 days in standby mode and 25 days in working mode. The receiver collar can last up to 15 days in standby mode and 7-10 days in working mode.

Are the remote transmitter and receiver collar waterproof?

The receiver collar is IPX7 waterproof, allowing your dog to swim, shower, and play in the rain. However, the remote transmitter is not waterproof.

What is the remote control range of the dog training collar?

The remote control range is up to 1640 ft (550 yards) in barrier-free areas and 1000 ft (330 yards) in barrier areas, allowing you to train your dog both indoors and outdoors.

Product FAQ:

Q: How many receivers does this dog training collar come with?
A: This dog training collar comes with 2 receivers.

Q: Can I train 2 dogs at the same time with this collar?
A: Yes, you can train 2 dogs at the same time with this collar as it has a 1+2 channel design and memory function for settings.

Q: What are the 3 training modes available in this dog training collar?
A: The 3 training modes available in this dog training collar are beep, vibration, and shock.

Q: Is the prong safe for my dog's skin?
A: Yes, the prong is safe for your dog's skin as it comes with an upgraded conductive silicone cover.

Q: How do I turn off the receiver collar?
A: The receiver collar turns off automatically after a set amount of time.

Q: Is the remote control waterproof?
A: No, the remote control is not waterproof.

Q: What is the adjustable range for the collar belt?
A: The adjustable range for the collar belt is from 8 to 25 inches, suitable for small, medium, large dogs from 15 to 100lbs.

Q: What is the battery life of the remote and receiver?
A: The remote can last up to 90 days in standby time and be able to work for 25 days. The collar receiver can last up to 15 days in standby time and be able to work for 7-10 days.

Q: Is the receiver waterproof?
A: Yes, the receiver is IPX7 waterproof.

Q: What comes in the package when I purchase this dog training collar?
A: When you purchase this dog training collar, you will receive 1x Remote Transmitter, 2x Receiver Collar, 2x Adjustable Collar Belt, 1x test Light, 2x USB Charging Cable, and 1x User Operating Guide.

Response:

The HKZOOI Dog Training Collar comes with 2 receivers and a remote control with 3 training modes - beep, vibration, and shock. The prong is safe for your dog's skin as it comes with an upgraded conductive silicone cover. The collar belt is adjustable from 8 to 25 inches, suitable for small, medium, large dogs from 15 to 100lbs. The remote control has a long battery life of up to 90 days in standby time and be able to work for 25 days, while the collar receiver can last up to 15 days in standby time and be able to work for 7-10 days. The receiver is IPX7 waterproof, allowing your dog to enjoy swimming, showering, and playing in the rain. The package includes 1x Remote Transmitter, 2x Receiver Collar, 2x Adjustable Collar Belt, 1x test Light, 2x USB Charging Cable, and 1x User Operating Guide.