FATEAR Dog Training Collar User Manual

Package Contents

• 1* Receiver Collar
• 1* Remote (w/ Wrist Strap)
• 1* USB Charging Cable
• 1* Test Light Tool
• 1* User Manual
• 4* Silicone Prong Case
• 2* Long Contact Pillar (for long hair dogs)
• 2* Short Contact Pillar (for short hair dogs)

Getting Started

1. Charge the remote control and receiver collar using the provided USB charging cable. Both devices should be fully charged within 1-2 hours.
2. Adjust the collar strap to fit your dog's neck comfortably. The collar should be snug but not too tight. The contact points should make good contact with your dog's skin.
3. Turn on the receiver collar by pressing the power button. The LED light will flash to indicate it's on.
4. Turn on the remote control by pressing the power button. The LED screen will display the current settings.
5. Pair the remote control with the receiver collar by pressing the channel button (1, 2, or 3) corresponding to the collar you want to control. The remote can control up to 3 collars simultaneously.

Training Modes

The FATEAR Dog Training Collar has 3 training modes:

• Beep: Emits a warning tone to get your dog's attention.
• Vibration: Provides a gentle vibration to correct your dog's behavior. The vibration intensity can be adjusted from level 1 to 8.
• Shock: Delivers a static shock to correct your dog's behavior. The shock intensity can be adjusted from level 0 to 18. Always start at the lowest level and work your way up if necessary.

Using the Remote Control

Press the corresponding buttons on the remote control to activate the training modes:

• Press the "Beep" button for the beep mode.
• Press the "Vibration" button for the vibration mode. Use the "+" and "-" buttons to adjust the intensity level.
• Press the "Shock" button for the shock mode. Use the "+" and "-" buttons to adjust the intensity level.

LED Light Feature

Press the "Light" button on the remote control to activate the LED light on the receiver collar. This can help you locate your dog in the dark.

Locking the Remote Control

To prevent accidental activation, use the lock switch on the remote control. Slide the switch to the locked position to disable the buttons.

Charging and Battery Life

Both the remote control and receiver collar are rechargeable using the provided USB charging cable. The remote control can last up to 15-20 days on a full charge, while the receiver collar's battery life will vary depending on usage.

Troubleshooting Tips

• Collar not responding: Ensure the collar and remote control are both charged and turned on. Check the connection between the remote and collar by pressing the channel button corresponding to the collar you want to control.
• Weak or no vibration/shock: Check the contact points on the collar to ensure they are making good contact with your dog's skin. Adjust the collar strap if necessary. Also, ensure the intensity level is set appropriately for your dog's size and temperament.
• Remote control not working: Check the lock switch on the remote control to ensure it is not in the locked position. If the problem persists, try charging the remote control.

FAQ

How do I test the collar without using it on my dog?

Use the provided test light tool to test the shock function. Attach the test light to the contact points on the collar, then activate the shock mode on the remote control. The test light will illuminate if the collar is functioning properly. Do not test the collar on your skin.

How often should I check the contact area on my dog's neck?

Check the contact area daily to ensure it is not causing irritation or discomfort. Remove the collar every 2 hours if possible to give your dog's skin a break.

Can I use this collar on aggressive dogs?

No, this collar is not recommended for use on aggressive dogs. Consult with a professional dog trainer or behaviorist for guidance on managing aggressive behavior.

How do I prevent the collar strap from fraying after cutting it to size?

After cutting the strap to the desired length, use a lighter to carefully singe the cut edges to prevent fraying.

Can I use this collar while my dog is swimming or in the rain?

Yes, the receiver collar is IPX7 waterproof, making it suitable for use in water-related activities and rainy conditions.

Q: What are the training modes available for the FATEAR Dog Training Collar?
A: The FATEAR Dog Training Collar has 3 training modes: beep, vibration (level 1-8), and shock (level 0-18).

Q: What is the range of the remote control for the FATEAR Dog Training Collar?
A: The remote training range of the FATEAR Dog Training Collar is up to 2000ft.

Q: Is the collar waterproof?
A: Yes, the receiver collar is waterproof with an IPX7 rating, which means it can be used in swimming, bathing, and even rainy days.

Q: How long does it take to charge both the receiver and remote?
A: Both the receiver and remote can be fully charged within 1-2 hours using a USB port.

Q: Can this collar be used on aggressive dogs?
A: It is not recommended to use this collar on aggressive dogs.

Q: How many dogs can be trained simultaneously with one remote?
A: The FATEAR Dog Training Collar can support up to 3 receivers collars with one remote.

Q: Is there a battery indicator for both the remote and receiver?
A: Yes, there is a dual battery indicator for both the remote control and receiver.

Q: How long does the battery last for both the remote and receiver?
A: The controller can last up to 15-20 days of work time.

Q: Is it easy to operate the remote control?
A: Yes, the remote control has large buttons and a large digital display, making it easy to operate even for elderly users.

Q: How do I prevent accidental operation of the shock mode on the remote control?
A: There is a security keypad lock on the remote control that prevents any accidental misoperation.