Charge your EV with ease using the astoneves 7kW Wallbox with RFID - Auto et Moto.
User Manual for astoneves 7kW Wallbox EV Charging Station
Product Overview
The astoneves 7kW Wallbox EV Charging Station is a high-performance, monophase 32A electric vehicle (EV) charger designed for home use. It is equipped with an RFID system for user authentication, a 6.1m Type 2 charging cable, and multiple safety features to ensure a safe and fast charging experience.
Installation
- Choose a suitable location for the Wallbox that is close to where you will park your EV and has access to the electrical grid.
- Ensure that the installation is performed by a certified electrician who will install the Wallbox according to local electrical codes and standards.
- The electrician should secure the Wallbox with a Type A differential circuit breaker and a 40A circuit breaker for optimal safety.
- Mount the Wallbox on the wall using the provided screws and anchors, ensuring it is level and secure.
Operation
- Approach the Wallbox with your EV and prepare the charging cable.
- Hold the RFID card close to the induction area of the Wallbox to authenticate and initiate the charging process.
- Connect the Type 2 plug of the charging cable to your EV's charging port.
- Monitor the charging status and data such as current, voltage, and temperature on the Wallbox's LCD and LED displays.
- Once the EV is fully charged or when you wish to stop charging, use the RFID card again to end the session and disconnect the cable.
Troubleshooting Tips
If you encounter any issues with your astoneves 7kW Wallbox, consider the following troubleshooting tips:
- RFID Not Recognized: Ensure the RFID card is held close to the induction area. If the problem persists, check if the card is damaged or contact support for a replacement.
- No Power: Verify that the Wallbox is properly connected to the power supply and that all circuit breakers are in the 'ON' position.
- Charging Does Not Start: Check if the charging cable is securely connected to both the Wallbox and the EV. Ensure that the EV is ready to receive charge.
- Error Messages: Refer to the error codes displayed on the LCD screen and consult the manufacturer's manual for specific instructions.
Frequently Asked Questions (FAQ)
Is the astoneves Wallbox compatible with all electric vehicles?
Yes, the astoneves Wallbox is compatible with all EVs that have a Type 2 inlet conforming to the IEC 62196-2 standard.
Can I adjust the charging current on the Wallbox?
No, the current cannot be adjusted and is fixed at 32A.
How do I know if the Wallbox is charging my vehicle?
The Wallbox's LCD and LED displays will show real-time charging status, including current, voltage, and temperature.
What should I do if my Renault Zoé is not charging with the Wallbox?
Firstly, ensure that the charging cable is properly connected and the RFID card is recognized. If the problem persists, consult the vehicle's manual for specific charging requirements or contact astoneves customer support for assistance.
Is the installation process complicated?
The installation should be straightforward for a certified electrician. It is important not to attempt self-installation if you are not qualified, as this could be dangerous and void the warranty.
What kind of maintenance does the Wallbox require?
The Wallbox requires minimal maintenance. Keep it clean and dry, and check periodically for any physical damage or loose connections.
How long is the warranty period?
The astoneves Wallbox comes with a 2-year warranty.
What safety features does the Wallbox have?
The Wallbox features Type A leakage protection and will cut off current within 0.2 seconds in case of overheating. It also monitors the PMW signal change accurately and efficiently.
What should I do if I have further questions or need support?
Contact astoneves customer support with your model number (B20-BC2-7KW-RFID) and any relevant details regarding your issue.
FAQ [continued]
**Product FAQ: astoneves 7kW Wallbox with RFID, 32A Single-phase EV Charging Station****Q: What is the maximum power output of this charging station?**
A: The astoneves 7kW Wallbox provides a maximum power output of 7kW, allowing for fast charging and significantly reducing charging time for electric vehicles.
**Q: How do I start or stop the charging process with this Wallbox?**
A: Simply hold the RFID card near the induction area of the Wallbox to start or stop the charging process efficiently.
**Q: What type of cable is included with this charging station?**
A: The station comes with a 6.1m Type 2 charging cable made of high-performance materials, including pure copper and silver-plated material for better conductivity.
**Q: Is this charging station compatible with all electric vehicles?**
A: Yes, this EV Wallbox (32A, 220-240V, Max 7kW) can be used with all electric vehicles that have a Type 2 input (IEC 62196-2 standard).
**Q: What kind of safety features does this charging station offer?**
A: The Wallbox includes multiple protection features such as Type A leakage protection, automatic current cutoff in case of overheating within 0.2 seconds, and efficient monitoring of signal changes to maintain battery life.
**Q: What are the dimensions and weight of this product?**
A: The item weighs 5.68 kilograms and has package dimensions of 43.7 x 28 x 26.2 cm.
**Q: Is installation easy for this charging station?**
A: Customers have reported that the installation is straightforward. It is recommended to use the appropriate cable and secure it with a Type A differential circuit breaker and a 40-amp circuit breaker.
**Q: Is there a warranty included with this product?**
A: Yes, the product comes with a 2-year warranty for added peace of mind.
Please note that these FAQs are based on information available at the time of writing and may be subject to change. For further inquiries or specific details, we recommend contacting the manufacturer directly.
Specifications
| Brand | astoneves |
| Model Number | B20-BC2-7KW-RFID |
| Category | Auto et Moto > Outils et dépannage > Équipements garage et atelier > Équipement de charge véhicule électrique > Stations de charge |
| Fabricant | astoneves |
| Marque | astoneves |
| Modèle | MC20C-T2 |
| Poids de l'article | 5,68 Kilograms |
| Dimensions du colis | 43,7 x 28 x 26,2 cm; 5,68 kilogrammes |
| Numéro du modèle de l'article | B20-BC2-7KW-RFID |
| Numéro de série fabricant | B20-BC2-7KW-RFID |
| ASIN | B09MLCTYQ7 |
| Moyenne des commentaires client | 4,3 4,3 sur 5 étoiles 34 évaluations 4,3 sur 5 étoiles |
| Classement des meilleures ventes d'Amazon | 13,322 en Auto et Moto (Voir les 100 premiers en Auto et Moto) 17 en Stations de charge véhicule électrique |
| Date de mise en ligne sur Amazon.fr | 24 mars 2022 |
| Marque | astoneves |
| Couleur | Noir |
| Spécifications respectées | IEC |
| Tension d'entrée | 240 Volts |
| Note actuelle | 32 A |
| null | 2 Ans |
| Color | Noir |
| Weight | 5,68 Kilograms |
| First Available | 24 mars 2022 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.