Poruis Dog Shock Collar User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Charging the Remote and Receiver
4. Setting up the Collar and Receiver
5. Pairing the Remote and Receiver
6. Training Modes and Operation
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

Thank you for choosing the Poruis Dog Shock Collar. This product is designed to help you train your dog effectively and humanely with its three safe training modes: sound, vibration, and shock. Please read this user manual carefully before using the product to ensure correct operation and safety.

2. Package Contents

• Remote control
• Receiver collar
• Adjustable nylon strap
• USB charging cable
• Quick user card
• User manual

3. Charging the Remote and Receiver

Before using the collar, both the remote and receiver must be fully charged. To charge, connect the USB charging cable to the charging port on the remote and receiver. Plug the other end of the cable into a USB outlet, such as a phone adapter, power bank, or computer. The charging process should take about 1-2 hours. The battery life of the receiver lasts for up to 10-20 days in standby mode.

4. Setting up the Collar and Receiver

1. Thread the adjustable nylon strap through the receiver.
2. Fasten the buckle, ensuring the strap is not too tight or too loose. You should be able to fit two fingers between the collar and your dog's neck.
3. Trim any excess strap, leaving about 2 inches for adjustments.

5. Pairing the Remote and Receiver

1. Turn on the receiver by pressing and holding the power button until the LED indicator lights up.
2. Press and hold the power button on the remote until the LED indicator lights up.
3. Press the "1/2/3" button on the remote to select the channel you want to pair with the receiver. The remote can control up to 3 receiver collars.
4. Press and hold the "Y" button on the remote for 3 seconds. The receiver will beep, indicating successful pairing.

6. Training Modes and Operation

The Poruis Dog Shock Collar features three training modes:

• Sound: Emits a standard beep as a warning or attention-getter.
• Vibration: Provides a standard vibration to alert or correct your dog.
• Shock: Delivers an adjustable shock (0-16 levels) for negative reinforcement. Use the "+" and "-" buttons on the remote to adjust the shock intensity.

To operate the training modes, press the corresponding button on the remote (sound, vibration, or shock). The remote also features a safety lock to prevent accidental shocks. Press and hold the lock button to enable or disable the safety lock.

7. Troubleshooting Tips

• If the collar is not responding, ensure both the remote and receiver are fully charged and paired correctly.
• Check that the receiver is turned on and the LED indicator is lit.
• If the collar is not delivering the desired intensity, adjust the shock level using the "+" and "-" buttons on the remote.
• Ensure the collar is fitted correctly and the contact points are touching your dog's skin.
• If the remote is not controlling multiple collars, make sure each collar is paired to a different channel (1, 2, or 3).

8. Frequently Asked Questions

Is the collar waterproof?

The receiver is waterproof with an IPX7 rating, but the remote is not. Ensure the charging rubber plug is tightened to maintain the waterproof performance.

What is the range of the collar?

The maximum range is 1640 feet in an open, unobstructed area. The range may be reduced if there are obstacles or interference.

Can I use this collar for multiple dogs?

Yes, the remote can control up to 3 receiver collars. Simply pair each collar to a different channel (1, 2, or 3) on the remote.

What size dogs is this collar suitable for?

The adjustable nylon strap fits dogs with neck sizes 6-27 inches and weighing over 8 lbs, making it suitable for small, medium, and large dogs.

How do I know when the collar needs to be recharged?

The LED indicator on the receiver will flash when the battery is low. Recharge the collar as needed to ensure proper operation.

Q: What are the training modes available in the PORUIS dog training collar?
A: The PORUIS dog training collar has three training modes: beep, vibration, and static training modes. The vibration level is adjustable.

Q: Is the dog shock collar waterproof?
A: Yes, the receiver of the PORUIS dog shock collar is waterproof with an IPX7 rating. However, the remote control is not waterproof.

Q: What is the range of the remote control for the dog training collar?
A: The maximum distance covered by the remote control is 1640 feet, making it flexible and easy to train your dog with the collar on in the park or backyard.

Q: Can multiple dogs be trained using one remote control with this shock collar?
A: Yes, up to three receiver collars can be used with one remote control, allowing you to train three dogs remotely at the same time.

Q: How long does it take to charge the PORUIS dog training collar, and how long does it last?
A: The dog shock collar can be fully charged in 1-2 hours using a portable USB charging method. The long-lasting lithium polymer battery can last for about 10-20 days.

Q: What size of dogs is suitable for this shock collar?
A: The adjustable and cuttable collar strap of the PORUIS shock collar is made of high-quality skin-friendly nylon and fits dogs over 8 lb and up with neck sizes 6-27 inches, making it suitable for large, medium, and small dogs.

Q: Does this dog training collar come with a warranty?
A: Yes, PORUIS offers a 2-year warranty for their dog training collar. If you have any questions or issues with the product you received, you can contact their after-sales support at [email protected].

Q: Can the vibration and shock functions be used without the beep/sound?
A: Yes, the vibration and shock functions of the PORUIS dog training collar can be used without the beep/sound.

Q: Is there a replacement strap available for the collar?
A: PORUIS has applied to sell collar straps separately, and it may take about a month to sell. If you have any problems with the product, you can contact them by email for assistance.

Q: Is it possible to get a refund or replacement if the collar gets damaged due to water exposure?
A: Yes, you can contact the company for reimbursement or a new collar.

Q: How do I test the shock effect of the dog training collar?
A: The E-shock function needs a test board for testing. Assemble the test board to the shock head to ensure full contact. Press the shock button, and the test light will light up, indicating that the shock function is normal. You can adjust the shock level using the side +- button. It is important to always start at the lowest level and work your way up.