Portable Bluetooth PA Speaker System User Manual

Table of Contents

1. Getting Started
2. Connecting to Bluetooth Devices
3. Using USB Flash Drive and Micro SD Card Readers
4. Connecting External Devices
5. Using the FM Radio
6. Using the Wireless Microphone
7. Audio Recording
8. Flaming Light Effect
9. Recharging the Battery
10. Troubleshooting Tips
11. Frequently Asked Questions

1. Getting Started

Before using your Portable Bluetooth PA Speaker System, please ensure that all items included in the package are present. This includes the speaker, remote control, AC/charger plug, and wireless microphone.

2. Connecting to Bluetooth Devices

1. Turn on the speaker by pressing the power button.
2. Enable Bluetooth on your device (smartphone, tablet, etc.).
3. Search for available Bluetooth devices and select "PSUFM1288B" from the list.
4. Once connected, you can now stream audio from your device to the speaker.

3. Using USB Flash Drive and Micro SD Card Readers

To play music from a USB flash drive or micro SD card, simply insert the drive or card into the appropriate slot on the speaker. The speaker will automatically switch to the corresponding mode and start playing the audio files.

4. Connecting External Devices

To connect external devices, such as a smartphone or MP3 player, use a 3.5mm AUX cable to connect the device to the speaker's AUX input.

5. Using the FM Radio

1. Press the "Mode" button on the speaker or remote control to switch to FM radio mode.
2. Use the "Tuning" buttons to search for available radio stations.
3. Press the "Play/Pause" button to select the desired station.

6. Using the Wireless Microphone

1. Turn on the wireless microphone by pressing the power button.
2. Hold the microphone close to your mouth and speak or sing into it.
3. Press the "Mic Priority" button on the speaker or remote control to give priority to the microphone input, temporarily lowering the volume of other audio sources.

7. Audio Recording

To record audio, insert a USB flash drive or micro SD card into the corresponding slot on the speaker. Press the "Rec" button on the speaker or remote control to start recording. Press the "Rec" button again to stop recording.

8. Flaming Light Effect

The speaker features a flaming light effect that adds a lively atmosphere to any event. To activate the light effect, press the "Light" button on the speaker or remote control. Press the button again to cycle through different light modes or to turn off the light effect.

9. Recharging the Battery

To recharge the speaker's battery, connect the AC/charger plug to the speaker and plug it into a wall outlet. The LED display will show the charging progress. Once fully charged, disconnect the charger from the speaker.

10. Troubleshooting Tips

• If the speaker does not turn on, ensure that the battery is fully charged and the power button is pressed.
• If the speaker does not connect to a Bluetooth device, ensure that the device's Bluetooth is enabled and the speaker is in Bluetooth mode.
• If the sound quality is poor, check the speaker's volume and equalizer settings, and ensure that the audio source is of good quality.
• If the wireless microphone does not work, ensure that it is turned on and the battery is charged.

11. Frequently Asked Questions

Q: Can I connect two speakers together for a stereo sound experience?

A: Yes, you can purchase an additional speaker and connect them together for a left and right stereo sound experience.

Q: How long does the battery last on a single charge?

A: The battery life may vary depending on usage, volume levels, and other factors. However, it should provide several hours of continuous playback on a single charge.

Q: Can I use the speaker while it is charging?

A: Yes, you can use the speaker while it is connected to the charger. However, this may affect the charging time.

Q: Is the speaker waterproof or water-resistant?

A: The speaker is not waterproof or water-resistant. Avoid exposing it to water or moisture to prevent damage.

Q: What is the power of this portable Bluetooth PA speaker system?
A: This speaker system is equipped with dual 8" woofer & piezoelectric tweeter with 500 watt peak power at 4 ohm for full range stereo sound reproduction and impressive bass response.

Q: Is this speaker system compatible with Bluetooth devices?
A: Yes, it is compatible with Bluetooth for wireless audio streaming and works with devices like iPhone, android mobile phone, iPad, tablet, PC. Ideal for personal indoor home and outdoor use.

Q: What are the inputs available on this Pyle Bluetooth speaker karaoke PA system?
A: This speaker system is equipped with USB flash drive & micro SD card readers so it can serve as an MP3 player, 3.5mm AUX input for connecting external devices & 1/4” mic input. Equipped w/ FM radio & digital LED display.

Q: Does this Bluetooth PA loudspeaker have any special effects?
A: Yes, the speaker features a flaming light effect that adds life to any occasion, great for parties & night gatherings when colorful presence is noticeable. It also includes a wireless handheld microphone w/ mic priority control.

Q: Is this Pyle PA speaker rechargeable?
A: Yes, it is fully portable thanks to its built-in rechargeable battery & carry handle w/ wheels so you can take it anywhere. Additional feature includes audio recording.

Q: What are the dimensions and weight of this portable Bluetooth PA speaker system?
A: The product dimensions are 11.8 x 12.2 x 30.12 inches and it weighs 26.7 pounds (27.82 lbs according to one of the customer reviews).

Q: What connectivity options does this speaker system have?
A: This speaker system has Bluetooth, Auxiliary, and USB connectivity options.

Q: What is the color of this Pyle PSUFM1288B Bluetooth speaker karaoke PA system?
A: The color of this speaker system is standard.

Q: What is the power source of this speaker system?
A: This speaker system is battery powered.

Q: Where is this product manufactured?
A: This product is manufactured in China.