Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setting Up Your Speakers
4. Connecting to Devices
5. Using the Remote Control
6. Switching Between Modes
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers. These speakers are designed to provide excellent sound quality in both studio monitor and HiFi modes, making them perfect for music production, home music systems, turntables, TVs, and computers. Please read this user manual carefully to ensure proper setup and usage of your new speakers.

2. Package Contents

• 1 x Pair of Sanyun SW206 Bookshelf Speakers
• 1 x Remote Control
• 1 x Optical Cable
• 1 x 3.5mm AUX Cable
• 1 x USB Cable
• 1 x Power Cord
• 1 x User Manual

3. Setting Up Your Speakers

1. Place the speakers on a stable, flat surface, such as a bookshelf or desk.
2. Connect the power cord to the back of the main speaker and plug it into an AC power outlet.
3. Connect the speakers together using the included speaker wire. The red terminals on each speaker should be connected to each other, and the black terminals should also be connected to each other.

4. Connecting to Devices

Your Sanyun SW206 speakers offer multiple connection methods to suit your needs. You can connect devices using Optical, Coaxial, Aux, Bluetooth 5.0, USB, or the 6.35mm TRS balanced input interface. Follow the instructions below for each connection method:

Optical and Coaxial Connections

Connect the optical or coaxial cable to the corresponding port on the back of the main speaker and the other end to your device. Make sure to remove the protective caps from the optical cable before connecting.

Aux Connection

Connect the 3.5mm AUX cable to the AUX input on the back of the main speaker and the other end to your device's headphone or audio output.

Bluetooth 5.0 Connection

1. Turn on your Bluetooth-enabled device and enable Bluetooth.
2. Press and hold the Mode button on the side of the main speaker or the remote control until the LED indicator turns blue.
3. On your device, search for available Bluetooth devices and select "Sanyun SW206" to pair.

USB Connection

Connect the USB cable to the USB port on the back of the main speaker and the other end to your device's USB port.

6.35mm TRS Balanced Input Connection

Connect your professional equipment, such as mixing consoles or mixers, to the 6.35mm TRS balanced input interface on the back of the main speaker using a TRS cable (not included).

5. Using the Remote Control

The included remote control allows you to control your speakers from a distance. Make sure to remove the protective plastic tab from the battery compartment before using the remote control. The remote control buttons include:

• Power: Turn the speakers on or off.
• Mode: Switch between input modes (Optical, Coaxial, Aux, Bluetooth, USB).
• Volume +/-: Adjust the volume level.
• Mute: Mute or unmute the speakers.

6. Switching Between Modes

Your Sanyun SW206 speakers feature two modes: Studio Monitor and HiFi. To switch between modes, press and hold the Mode button on the side of the main speaker or the remote control for 3 seconds. The LED indicator will change color to indicate the current mode:

• Green: Studio Monitor mode
• Blue: HiFi mode

7. Troubleshooting Tips

If you encounter any issues while using your Sanyun SW206 speakers, try the following troubleshooting tips:

• Ensure all cables are properly connected and the power cord is plugged into a working outlet.
• Check the volume level on both the speakers and your connected device.
• Try a different connection method if you are experiencing issues with a specific input.
• Reset the speakers by unplugging the power cord, waiting for 10 seconds, and plugging it back in.

8. Frequently Asked Questions

Q: Can I connect multiple devices to the speakers at the same time?

A: Yes, you can connect different devices to the speakers using the various connection methods. However, only one input can be active at a time. Use the Mode button to switch between connected devices.

Q: Can I use these speakers with my TV?

A: Yes, you can connect your TV to the speakers using the Optical, Coaxial, or Aux connections, depending on your TV's available outputs.

Q: Is there a noticeable delay when using Bluetooth?

A: Some users may experience a slight delay when using Bluetooth. If you notice a delay, try using a wired connection for better synchronization.

Q: Can I adjust the bass and treble levels on the speakers?

A: Yes, you can adjust the bass and treble levels using the knobs on the side of the main speaker.

Q: What are the different modes available in the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers?
A: The Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers come with built-in studio monitor and HiFi mode, which can be switched with just one key. Use monitor mode when creating compositions for a more straightforward sound, and switch to HiFi mode when listening to music for more beautiful and richer tones.

Q: What is the speaker unit used in the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers?
A: The main speaker unit used in the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers is a 4-inch carbon fiber unit, which is designed with Sanyun carbon fiber material and multi-layer voice coil technology. It is coupled with a 25mm silk dome tweeter for excellent sound performance, warm and thick medium frequency, deep and powerful low frequency, clear and bright high frequency sound characteristics.

Q: What kind of tuning has been done on the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers?
A: According to the characteristics of the speaker units, dozens of professional adjustments have been made in the laboratory to obtain the flat curve required by the monitor speakers. The box body is made of MDF wood, which effectively reduces resonance and box sound, and truly restores the essence of sound.

Q: What kind of input interfaces does the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers have?
A: The Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers have multiple connection methods including Optical, Coaxial, Aux, Bluetooth 5.0, and USB connection with 24bit DAC. It also has a 6.35mm TRS balanced input interface that can be connected to professional equipment such as Mixing Console and Mixers to build a small music production system.

Q: What is the power supply for the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers?
A: The Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers are powered by AC100-240V/50-60HZ.

Q: What is the weight and dimension of the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers?
A: The Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers weigh 12.67 pounds and have dimensions of 7.48 x 6.5 x 9.45 inches.

Q: What are the different ways to connect devices to the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers?
A: The Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers can be connected through Optical, Coaxial, Aux, Bluetooth 5.0, and USB connection with 24bit DAC. It also has a 6.35mm TRS balanced input interface that can be connected to professional equipment such as Mixing Console and Mixers.

Q: Does the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers come with stands?
A: No, the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers do not come with stands, but there are many available on Amazon.

Q: Can these speakers be connected to a TV?
A: Yes, the Sanyun SW206 80W Active Dual-Mode Bookshelf Speakers can be connected to a TV through Optical, Coaxial, or Aux connection depending on the TV's available ports. If the TV does not have any of these ports, a Bluetooth adapter may be needed to connect wirelessly.