PETPIK Dog Training Collar User Manual

Table of Contents

1. Package Contents
2. Initial Charging
3. Adjusting the Collar
4. Pairing the Remote and Collar
5. Training Modes and Levels
6. Using the Remote
7. Waterproof and Range
8. Troubleshooting
9. Frequently Asked Questions

1. Package Contents

• 1 x PETPIK Dog Training Collar
• 1 x Remote Transmitter
• 1 x USB Charging Cable
• 1 x Test Light
• 1 x User Manual

2. Initial Charging

Before using the PETPIK Dog Training Collar, charge both the collar and remote transmitter for 4 hours using the provided USB charging cable. The collar's battery lasts for 11-15 days, and the remote transmitter's battery lasts for over 1 month.

3. Adjusting the Collar

Adjust the collar to fit your dog's neck size (7-26 inches) by sliding the buckle. The collar should be snug but not too tight, allowing you to fit one finger between the collar and your dog's neck. Do not attach a leash to this collar.

4. Pairing the Remote and Collar

To pair the remote transmitter with the collar, follow these steps:

1. Turn on the collar by pressing the ON/OFF button for 3 seconds.
2. Press and hold the Y button on the remote transmitter for 3 seconds.
3. The collar will beep and vibrate, indicating successful pairing.

5. Training Modes and Levels

The PETPIK Dog Training Collar offers three training modes:

• Tone (Beep)
• Vibration (Buzz)
• Static Stimulation (1-16 levels)

You can customize your training system for your dog by selecting the appropriate mode and level. Start from the lowest level and increase gradually if needed.

6. Using the Remote

The remote transmitter allows you to control the collar from up to 1000ft (336 yards) away. To use the remote:

1. Select the desired training mode by pressing the MODE button.
2. Adjust the intensity level for Vibration or Static Stimulation using the "+" and "-" buttons.
3. Press the Y button to activate the selected mode.
4. Use the security keypad lock to prevent accidental misoperations.

7. Waterproof and Range

The collar is IPX7 waterproof, allowing your dog to play in water without damaging the device. The remote transmitter has a range of up to 1000ft (336 yards), making it suitable for training in parks or backyards.

8. Troubleshooting

• If the collar is not responding to the remote, ensure that both devices are charged and paired correctly.
• If the collar's static stimulation is not working, use the provided test light to check for functionality.
• If the collar's range is shorter than expected, ensure there are no obstacles or interference between the remote transmitter and collar.

9. Frequently Asked Questions

1. Can I use this collar with aggressive dogs?
   No, this collar is not recommended for aggressive dogs.
2. How long should I leave the collar on my dog?
   Avoid leaving the collar on your dog for more than 2 hours at a time. Reposition the collar every 1-2 hours to prevent skin irritation.
3. How do I check my dog's skin condition?
   Examine your dog's neck daily for any redness, irritation, or discomfort caused by the collar. If you notice any issues, discontinue use and consult your veterinarian.
4. What is the proper way to charge the collar and remote?
   Use the provided USB charging cable to charge both devices. The initial charge should be 4 hours, while subsequent charges take about 2 hours.

Q: What are the training modes available for the PETPIK Dog Training Collar?
A: There are three training modes available for the PETPIK Dog Training Collar - Tone (Beep), Vibration (Buzz), and Static Stimulation (1-16 levels).

Q: What is the range of the remote for this collar?
A: The training range of this electronic collar is up to 1000ft (336 yards).

Q: Is the collar waterproof?
A: Yes, the collar is 100% waterproof and has an IPX7 rating.

Q: What is the weight of the remote?
A: The remote weighs only 0.43lbs and is portable and lightweight.

Q: How long does it take to charge the collar and remote?
A: It takes about 2 hours to fully charge the collar, and it will last for 11-15 days. The remote will last for over 1 month. For the initial charge, be sure to charge it for 4 hours.

Q: Is there a manual included with the product?
A: No, there isn't a manual included with the product.

Q: Can this collar be used for more than one dog?
A: Yes, this shock collar with remote supports a maximum of 2 dogs training through only 1 transmitter.

Q: Can I use this collar along with my dog's regular collar?
A: Yes, you can use this collar along with your dog's regular collar as it won't interfere with any other collars or tags.

Q: Where is the charging port on the collar?
A: The charging port is located on the probe side of the collar.

Q: Are replacement parts available for this product?
A: Replacement parts are not readily available from PETPIK, so it may be best to order additional collars or remotes if needed.