Bousnic Shock Collar for Dogs - User Manual

Table of Contents

1. Product Introduction
2. Package Contents
3. Charging the Device
4. Adjusting the Collar Length
5. Using the Remote Control
6. Training Modes
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Product Introduction

The Bousnic Shock Collar for Dogs is designed to help you train your dog effectively and humanely using three safe training modes: beep, vibration, and safe shock. With a remote range of up to 1000ft, a waterproof receiver, and a comfortable design for all dog sizes, this collar is perfect for improving your dog's behavior and obedience.

2. Package Contents

• 1 x Remote Control
• 1 x Receiver with Collar
• 1 x Charging Cable
• 1 x User Manual

3. Charging the Device

Before using the collar, make sure to charge both the remote control and the receiver. To charge, connect the provided charging cable to the charging port on each device and plug it into a phone adapter or other USB charging source. The initial charge should be 4 hours, while subsequent charges will take 2-3 hours. The receiver typically lasts for 11-15 days, while the remote battery will last for over a month.

4. Adjusting the Collar Length

To adjust the collar length, follow these steps:

1. Slide the buckle on the strap up or down to a suitable position.
2. Thread the strap into the hole of the buckle to fix the collar length.
3. For the minimum length of 6 inches, slide the buckle to the part closest to the receiver.
4. For the maximum length of 27 inches, slide the buckle to the part farthest away from the receiver.

5. Using the Remote Control

The remote control features a dual channel to support training 2 dogs simultaneously (additional collar sold separately). The security keypad lock on the remote prevents accidental misoperation. To use the remote control, follow these steps:

1. Power on the remote by pressing and holding the power button until the LED screen turns on.
2. Select the desired training mode using the mode button (beep, vibration, or shock).
3. Adjust the intensity level of the training mode using the "+" and "-" buttons.
4. Press the channel button to switch between the two channels if training two dogs.
5. Press the training button to activate the selected mode on the collar.

6. Training Modes

The Bousnic Shock Collar offers three training modes:

1. Beep: A standard audible beep to get your dog's attention.
2. Vibration: A standard vibration to provide a gentle reminder.
3. Safe Shock: An adjustable electric shock (1-16 levels) for more persistent behavior issues. Start at the lowest level and gradually increase until you find the most effective level for your dog's temperament.

7. Troubleshooting Tips

• If the collar is not responding to the remote, check the battery levels on both devices and ensure they are properly charged.
• Make sure the remote and receiver are within the 1000ft range and that there are no obstacles interfering with the signal.
• If the collar is not functioning in wet conditions, ensure the receiver is securely attached to the collar and that the collar is properly fitted to your dog's neck.
• If the collar is causing irritation or discomfort, check the fit and adjust the collar length as needed. Avoid leaving the collar on for more than 12 hours per day.

8. Frequently Asked Questions

Q: Is the collar suitable for all dog sizes?

A: Yes, the adjustable nylon collar fits neck sizes between 6-27 inches, making it suitable for dogs weighing 8-120lbs.

Q: Can I use the collar to train two dogs at once?

A: The remote control supports dual channels, allowing you to train two dogs simultaneously. You will need to purchase an additional collar separately.

Q: How long does the battery last?

A: The receiver typically lasts for 11-15 days, while the remote battery will last for over a month. Charging time is 2-3 hours for both devices.

Q: Is the collar waterproof?

A: The receiver is IPX7 waterproof, allowing you to train your dog in wet conditions without damaging the device. However, the remote control is not waterproof and should be kept away from water.

Q: What are the modes of the Bousnic Shock Collar for Dogs?
A: The Bousnic Shock Collar for Dogs has three modes: beep, vibration, and adjustable safe shock levels.

Q: What is the range of the remote for this collar?
A: The remote training range of this e-collar is almost 1000ft, which allows for training in the backyard, park, beach or anywhere else.

Q: Is the collar waterproof?
A: Yes, the receiver is waterproof with an IPX7 rating, allowing for training in moist/wet conditions without damaging the receiver. However, the remote is not waterproof.

Q: What sizes of dogs is this collar suitable for?
A: The adjustable nylon collar fits 6-27 inches and is comfortable for small, medium, large dogs or other pets (8lbs -120lbs).

Q: How long does the battery last?
A: This e-collar uses lithium battery technology providing battery life that lasts for a long time. Typically used, the receiver will last for 11-15 days, while the remote battery will last for over 1 month.

Q: Is there a replacement band available for this collar?
A: Yes, replacement bands are available for purchase on Amazon.

Q: Can this collar be used on cats?
A: According to a veterinarian's advice, if a cat is being destructive or endangering itself or another animal, it's fine to use. However, do not use the shock feature. Ring the bell to create a warning and then use the vibration at its lowest.

Q: Is there a warranty or customer service available?
A: The manufacturer provides top-notch customer service and offers a warranty on their products. Any further questions can be directed to [email protected] or Facebook: @bousnic.