EPOHESE Dog Shock Collar Dog Training Collar with Remote User Manual

Package Contents

• 1 x Training Remote
• 1 x Receiver Collar
• 1 x USB Charging Cable
• 4 x Silicone Prongs
• 4 x Contact Points
• 1 x Test Board
• 1 x User Manual

Getting Started

1. Charge both the remote and the receiver collar using the provided USB charging cable. It takes approximately 2 hours to fully charge the devices.
2. Adjust the collar to fit your dog's neck size (8 to 25 inches). The collar should be snug but not too tight. You should be able to fit two fingers between the collar and your dog's neck.
3. Turn on the receiver collar by pressing the power button. The indicator light will turn green when the collar is on.
4. Turn on the remote control by sliding the lock button down and pressing any button on the remote. The remote's screen will display the current settings.
5. Pair the remote with the receiver collar by pressing any button on the remote and then immediately pressing the power button on the collar.
6. Test the connection by pressing the speaker button on the remote. The collar should emit a beep sound.

Training Modes

The EPOHESE Dog Shock Collar offers three training modes: Beep, Vibration, and Static Shock. Each mode has 9 levels of intensity.

• Beep: Press the beep button on the remote to emit a beep sound from the collar. Adjust the beep level (1-9) using the '+' and '-' buttons on the remote.
• Vibration: Press the vibration button on the remote to activate the vibration mode. Adjust the vibration level (1-9) using the '+' and '-' buttons on the remote.
• Static Shock: Press the shock button on the remote to activate the static shock mode. Adjust the shock level (1-9) using the '+' and '-' buttons on the remote. Use the provided test board to test the shock function.

Additional Features

• Security Keyboard Lock: The remote has a security keyboard lock to prevent accidental shocks. Slide the lock button up to lock the remote and down to unlock it.
• Waterproof Receiver: The IPX7 waterproof receiver can be submerged in water up to 164 feet for 30 minutes.
• 4 Channels: The remote can control up to 4 collars simultaneously. Press the channel button on the remote to switch between channels.

Troubleshooting Tips

1. If the remote and collar are not pairing, make sure both devices are turned on and try the pairing process again.
2. If the collar is not responding to the remote, check the battery levels of both devices and charge them if necessary.
3. If the collar is causing skin irritation, try using the silicone prongs instead of the metal contact points.
4. If the collar is not working properly, try resetting the device by turning it off and on again.

Frequently Asked Questions

Q: How do I charge the remote and collar?

A: Use the included USB charging cable to charge both devices. It takes approximately 2 hours to fully charge the devices.

Q: Can I use this collar on multiple dogs?

A: Yes, the remote can control up to 4 collars simultaneously. You will need to purchase additional collars separately.

Q: Is the collar waterproof?

A: Yes, the IPX7 waterproof receiver can be submerged in water up to 164 feet for 30 minutes.

Q: What is the range of the remote control?

A: The remote control has a range of up to 1000 feet, allowing you to train your pet both indoors and outdoors.

Q: Is this collar suitable for small dogs?

A: Yes, the adjustable collar is suitable for dogs with neck sizes between 8 and 25 inches and weighing between 5 and 110 pounds.

Q: What accessories are included in this EPOHESE Dog Shock Collar with Remote?
A: The package includes 1 Training Remote, 1 Receiver Collar, 1 USB Charging Cable, 4 Silicone Prongs, 4 Contact Points, 1 Test Board, and 1 User Manual.

Q: Is this collar waterproof?
A: Yes, the receiver is IPX7 waterproof.

Q: How do I pair the transmitter and receiver?
A: To pair them, turn on the switch button of the transmitter and press the button with the dog pattern to select channel 1, 2, 3 or 4. Press and hold the switch button of the receiver for 3 seconds until the green light flashes, and then press the sound/vibration or electric shock button on the transmitter at will. The green light on the receiver is always on, indicating that the pairing is successful.

Q: Is this suitable for a small Maltese (about 6 pounds)?
A: Yes, it is suitable for small dogs as well as medium and large dogs (5 lbs-110 lbs).

Q: How do I adjust the shock setting?
A: Push the shock button and then use the up and down buttons on the right side of the unit to adjust the intensity of shock, vibration or beep.

Q: Will the remote turn off after a period of time or can I make it turn off only when I want it to? Same for the receiver?
A: The remote is always ready to be used but in some sort of sleep mode. It has a battery strength indicator so you can tell when it needs to be charged. The receiver will enter 1-minute safety mode after 8 seconds of training continuously to avoid hurting your dog.

Q: How do I contact the seller?
A: You can contact EPOHESE customer service team via email at [email protected].

Overall, this EPOHESE Dog Shock Collar with Remote is a safe and effective tool for training your dog. It offers 3 humane training modes, a security keyboard lock, IPX7 waterproof receiver, 4 channels, longer battery life, and an adjustable collar suitable for all size dogs. The package includes all necessary accessories and the product has received positive reviews from customers.