Ustellar RGB Flood Light Outdoor User Manual

Package Contents

• 6 x Floodlights
• 1 x Power adapter
• 7 x Ground Sticks
• 7 x Screws
• 7 x Screws Washers
• 1 x L Shaped Hex Key Wrench
• 1 x User Manual

Installation

1. Choose the location where you want to install the floodlights.
2. Place the washer over the screw and flatten out the light fixture.
3. Insert the screw through the center hole of the light fixture.
4. Screw on the ground stick to the screw protruding from the center hole.
5. Use the provided L-shaped hex key wrench to tighten the screw and secure the ground stick in place.
6. Repeat steps 1-5 for each floodlight.
7. Connect the floodlights using the included cables, making sure they are daisy-chained together.
8. Plug the power adapter into an outdoor power outlet.

App Setup and Pairing

1. Download and install the Smart Life app on your smartphone.
2. Ensure your phone is connected to a 2.4GHz Wi-Fi network.
3. Turn on your phone's Bluetooth.
4. Open the Smart Life app and tap the "+" button on the top right corner to add a new device.
5. Select "Add Device" and wait for the app to discover the floodlights.
6. Once discovered, tap "Add" and follow the on-screen instructions to complete the pairing process.
7. Rename the device to something easily recognizable, like "Garden Lights."

Using the Floodlights

1. Open the Smart Life app and select your floodlights from the list of devices.
2. Use the app's interface to control the lights, including turning them on and off, adjusting brightness, and changing colors.
3. For voice control, link your Smart Life account to your Alexa or Google Assistant device and use voice commands to control the floodlights.

Troubleshooting Tips

• If the floodlights are not responding, check if they are properly connected and the power adapter is plugged in.
• Ensure your phone is connected to a 2.4GHz Wi-Fi network, as the floodlights are not compatible with 5GHz networks.
• If the floodlights are not discovered by the app, make sure your phone's Bluetooth is turned on and try again.
• For connection issues, try moving the first floodlight closer to your Wi-Fi router to ensure a strong signal.

Frequently Asked Questions

Can the line between the floodlights be extended?

No, the floodlights and cables cannot be extended. Please do not cut the cable.

Can the RGB flood light work without Wi-Fi?

If there is no Wi-Fi network, the floodlight cannot work properly. Please make sure the Wi-Fi signal is strong enough, and it is recommended to place the first floodlight close to your Wi-Fi router.

Do the landscape lights only work with a 2.4GHz network?

Yes, the floodlights only work with 2.4GHz Wi-Fi networks and are not compatible with 5GHz networks. If you have connection problems, check whether you are using a 2.4GHz network first.

Why do I need to turn on my phone's Bluetooth?

Bluetooth is used to assist in connecting the floodlight to the network. For the first-time pairing in the app, please make sure to turn on both Wi-Fi and Bluetooth connections on your phone.

Why is one of the floodlights not working?

Please check whether all six lights are turned on in the app interface. The app can control the ON and OFF of each light, so if you turn off one of the lights in the app, the floodlight will not light up.

Q: How many lights come in the Ustellar RGB Flood Light Outdoor set?
A: The Ustellar RGB Flood Light Outdoor set comes with 6 floodlights.

Q: Can I string only 4 lights together?
A: No, the unit comes with 6 lights that are strung together as a non-detachable unit, with about 10 feet of cord between each light.

Q: Will they work with only a remote?
A: No, the RGB flood lights only work with mobile app with 2.4Ghz WiFi.

Q: Can it be used without WiFi?
A: No, the Ustellar GemBand Smart Flood Light can only be used with WiFi.

Q: Can I extend the distance between each light by adding more wire?
A: No, the distance between each light cannot be extended. Please do not cut the cable.

Q: How do you hook the sets together? Can you only have one power plug and hook two strings together?
A: Our lights cannot be disassembled, because there is a built-in IC in the product, you cannot use one adapter to connect two sets of lights.

Q: If you put these on a timer, will they turn on from the last setting?
A: Yes, the lights will keep the last setting if you set a timer.

Q: Is mounting on walls possible?
A: Yes, these can go on walls, fences, etc. The product description site shows pictures of the lights mounted on walls and fences.

Q: Can this be used as 220v?
A: No, this light cannot be used as 220V.

Q: How do you control individual lights?
A: You can control all 6 lights at once (same color/brightness), or have each light display a different color/brightness through the mobile app.