JYX Wireless Microphone User Manual

Introduction

Welcome to the JYX Wireless Microphone System! This professional UHF metal handheld dynamic microphone is perfect for amplifiers, PA systems, karaoke singing, weddings, parties, speeches, and church events. With a rechargeable receiver and an 80ft operating range, you can enjoy wireless freedom and superior signal stability during your performances.

Package Contents

• 1 x UHF Wireless Microphone
• 1 x Receiver with 1/4'' (6.35mm) plug
• 1 x Anti-slip ring
• 2 x Type-C charging cable
• 2 x Rechargeable batteries
• 1 x User manual

Setting Up the Microphone System

1. Charge the wireless microphone and the receiver using the provided Type-C charging cables. It takes about 2-3 hours to fully charge the receiver and 6-8 hours for the microphone.
2. Install the rechargeable batteries into the microphone and the receiver.
3. Turn on the microphone by pressing the power button.
4. Turn on the receiver and plug it into the 6.35mm jack of your amplifier, mixer, or other compatible audio devices.
5. The receiver will automatically sync the frequency with the transmitter. You're now ready to use your wireless microphone!

Using the Microphone

Hold the microphone close to your mouth and speak or sing into it. The unidirectional polar pattern helps reduce background noise and ensures clear vocal sound. You can move freely within an 80ft range from the receiver without losing signal quality.

Charging and Battery Life

When the battery level is low, the LED display on the microphone and receiver will show a low battery indication. Recharge the batteries using the provided Type-C charging cables. The receiver takes about 2-3 hours to charge and can be used for 6-8 hours, while the microphone takes 6-8 hours to charge.

Troubleshooting Tips

• No sound or weak sound: Ensure the microphone and receiver are turned on and the batteries are properly installed. Check the connection between the receiver and your audio device. Increase the volume on your audio device if necessary.
• Intermittent signal or signal drop: Make sure you are within the 80ft operating range and that there are no obstacles between the microphone and the receiver. Reduce the distance between the microphone and the receiver if necessary.
• Distorted sound: Lower the volume on your audio device or move the microphone further away from your mouth.
• Unable to charge: Check the charging cables and ensure they are properly connected to the microphone, receiver, and power source. Try using a different power source if necessary.

Frequently Asked Questions

Q: Can this microphone be used with a mobile phone or portable speaker?

A: The JYX Wireless Microphone is designed for use with amplifiers, mixers, and other audio devices that have a 6.35mm jack. It may not be compatible with mobile phones or portable speakers without a suitable adapter.

Q: How do I know when the batteries are fully charged?

A: The LED display on the microphone and receiver will show a full battery indication when they are fully charged.

Q: How many channels does this microphone have?

A: The JYX Wireless Microphone System has one channel.

Q: How do I connect the microphone to my audio device?

A: Plug the receiver with the 1/4'' (6.35mm) plug into the corresponding jack on your audio device. Turn on the microphone and the receiver, and they will automatically sync the frequency.

Q: What is the signal-to-noise ratio of this microphone?

A: The JYX Wireless Microphone has a signal-to-noise ratio of 120 dB.

Q: What is included in the package?
A: The package includes one wireless microphone, one receiver with a 1/4''(6.35mm) plug, one anti-slip ring, two Type-C charging cables, two rechargeable batteries, and one user manual.

Q: What is the operating range of the microphone?
A: The microphone has an operating range of up to 80 feet (line of sight), making it suitable for indoor and outdoor activities such as home karaoke, church, wedding, conference, and small stage performance.

Q: What devices is the microphone compatible with?
A: The microphone has superior signal stability and is compatible with karaoke machines, powered speakers, amplifiers, mixers, audio interfaces, and more. It has a durable 1/4 inch jack (6.35mm) output for DJ mixers and guitar amps.

Q: How easy is it to set up?
A: Setting up the microphone is quick and easy. Simply turn on the system and plug the receiver into the 6.35mm jack. The receiver will sync the frequency with the transmitter automatically. You can then wear the anti-slip ring and start your karaoke party.

Q: How long does the battery last?
A: The rechargeable and portable receiver only needs to charge for about 2-3 hours and can be used for 6-8 hours. This makes it perfect for extended performances.

Q: Is there any delay in the sound?
A: No, there is no delay in the sound. The microphone provides stable signal and sound at the same time.

Q: Can two microphones be used for a duet?
A: Yes! If you buy two microphones, they can be used for a duet. Mic 1 and Mic 2 can be used on a karaoke machine.

Q: Is there an LED display on the microphone?
A: Yes, the microphone has an LED display that shows the battery level and other important information.

Q: What is the weight of the microphone?
A: The microphone weighs 1.03 pounds, making it lightweight and easy to handle.

Q: What is the color of the microphone?
A: The microphone comes in a silver color.

Q: What is the material of the microphone?
A: The microphone shell is made of aluminum alloy, which makes it sturdy and lightweight.

Q: What is the signal-to-noise ratio of the microphone?
A: The signal-to-noise ratio of the microphone is 120 dB, which ensures clear and crisp sound quality.

Q: How many channels does the microphone have?
A: The microphone has one channel.

Q: When was the product first available?
A: The product was first available on March 7, 2022.

Q: Where is the product manufactured?
A: The product is manufactured in China.