Saulcy Dog Training Collar User Manual

Table of Contents

1. Package Contents
2. Product Overview
3. Setting Up the Collar
4. Using the Training Modes
5. Charging the Collar and Remote
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Package Contents

• 1x Remote
• 1x Receiver
• 1x Dog Collar
• 1x Micro USB Cable
• 1x Shock Test Light
• 1x Wrist Strap
• 4x Conductive Points
• 4x Silicone Cover
• 1x User Manual

2. Product Overview

The Saulcy Dog Training Collar is designed to help dog owners effectively train their pets and correct unwanted behaviors. This collar features three training modes: beep, vibration, and shock, with adjustable intensity levels for each mode. The collar is waterproof and has a remote range of up to 1000ft, making it suitable for use in various environments.

3. Setting Up the Collar

1. Ensure the collar is fully charged before use. See section 5 for charging instructions.
2. Adjust the collar length to fit your dog comfortably. The collar is suitable for dogs weighing between 15-100lbs and has a length of 27 inches.
3. Attach the receiver to the collar and ensure the conductive points have direct contact with your dog's skin on the underside of the neck. If you do not plan to use the shock mode, you can remove the conductive points from the receiver.
4. Pair the remote with the collar receiver by following the instructions in the user manual.

4. Using the Training Modes

The Saulcy Dog Training Collar features three training modes: beep, vibration, and shock. The intensity levels for vibration and shock modes can be adjusted from 00-99. Start with the lowest intensity and gradually increase it to find the most suitable level for your dog.

1. Beep mode: Press the beep button on the remote to emit a sound, which can be used to get your dog's attention or as a warning signal.
2. Vibration mode: Press the vibration button on the remote and adjust the intensity level using the + and - buttons. The vibration can be used to correct unwanted behaviors or as a reinforcement for obedience training.
3. Shock mode: Press the shock button on the remote and adjust the intensity level using the + and - buttons. Use the shock mode with caution and only when necessary, as it can be very strong even at the lowest setting. The security keypad lock can be used to prevent accidental shocks.

5. Charging the Collar and Remote

Both the collar receiver and remote control are equipped with rechargeable lithium batteries. Use the included micro USB cable to charge both devices. The remote control can last up to 90 days on standby, while the receiver can last up to 30 days on standby. It takes approximately 2-3 hours to fully charge the devices.

6. Troubleshooting Tips

• If the collar is not responding to the remote, ensure the devices are properly paired and within the 1000ft remote range.
• If the collar is not holding a charge, try using a different USB cable or charging port.
• If the shock mode is not working, ensure the conductive points are properly attached to the receiver and have direct contact with your dog's skin.
• If the remote control buttons are not working, ensure the security keypad lock is not engaged.

7. Frequently Asked Questions

Can I use this collar on a puppy?

The Saulcy Dog Training Collar is recommended for dogs over 6 months old.

How long can my dog wear the collar?

Avoid leaving the collar on your dog for more than 12 hours per day. Ideally, it should be worn for no more than 6 hours at a time. Check your dog's skin condition daily to ensure there are no issues.

Can I use this collar to train two dogs at the same time?

Yes, the remote control supports up to two channels, allowing you to train two dogs simultaneously. However, you will need to purchase an additional collar and receiver for the second dog.

Is the remote control waterproof?

No, only the collar receiver is waterproof. The remote control should be kept away from water.

Q: What are the training modes available on the Saulcy Dog Training Collar?
A: The Saulcy Dog Training Collar has 3 training modes: beep, vibration, and shock mode. The vibration and shock modes have adjustable levels from 00-99.

Q: What is the remote range of the Saulcy Dog Training Collar?
A: The remote range of the Saulcy Dog Training Collar is up to 1000ft (333 yards) with advanced anti-jamming technology.

Q: Is the receiver waterproof?
A: Yes, the receiver of the Saulcy Dog Training Collar is IPX7 waterproof, allowing your dog to swim and bathe freely. However, please note that the remote is not waterproof.

Q: What sizes of dogs can use this collar?
A: The adjustable collar fits all sizes of dogs, ranging from small to large dogs weighing between 15-100lbs.

Q: Can I train two dogs at once with this collar?
A: Yes, the Saulcy Dog Training Collar supports maximum 2 dogs training at the same time with 2 channels control.

Q: Is the battery rechargeable?
A: Yes, both the receiver and remote of the Saulcy Dog Training Collar are rechargeable with a general USB charging port. The standby time for the remote is up to 90 days, while the receiver is up to 30 days.

Q: Is there a security keypad lock on this collar?
A: Yes, there is a security keypad lock on this collar that can protect your dog from accidental shock.

Q: Is the collar reflective for safety purposes?
A: Yes, the collar is made of soft reflective nylon that protects your dog from vehicles and dark nights.

Q: How do I pair the remote and receiver?
A: You can refer to a video tutorial provided by the manufacturer or contact them for assistance via email.

Q: Is it safe to use the shock mode on my dog?
A: The shock mode should be used with caution and only as a last resort. It is recommended to start with the lowest level and see if your dog responds to the beep or vibration modes before using the shock mode. Always read the user manual carefully before using the collar on your dog.