Dash Cam Type C Hardwire Kit User Manual

Introduction

Welcome to the installation and user guide for your new Type C Dash Cam Hardwire Kit by navycrest. This kit allows for 24-hour surveillance of your vehicle even when the ignition is off, ensuring peace of mind. The anti-interference cable design ensures minimal disruption to car radio signals.

Package Contents

• Type C hardwire kit
• Installing crowbar
• 4 x fuse tap cable

Installation Instructions

1. Choose the appropriate fuse tap cable based on your vehicle's fuse type.
2. Locate your vehicle's internal fuse box. This is typically found under the dashboard, near the driver's side.
3. Using the installing crowbar, carefully remove the existing fuse from the fuse box that corresponds to an accessory or ignition-switched power source.
4. Insert the removed fuse into the fuse tap cable's slot marked "Fuse" ensuring it's securely in place.
5. Insert the fuse tap cable into the fuse slot in the fuse box from where the original fuse was removed.
6. Connect the other end of the fuse tap cable to the hardwire kit.
7. Connect the Type C end of the hardwire kit to your dash cam.
8. Route the cable to the dash cam avoiding any moving parts and secure it with cable clips if necessary.
9. Ground the hardwire kit by attaching the ground wire to a metal, unpainted part of the vehicle's chassis.
10. Once all connections are secure, start the vehicle to test the dash cam operation.

NOTE: If you are not confident with vehicle electronics, we recommend seeking professional installation.

Troubleshooting Tips

• Dash Cam Not Powering On: Check all connections, ensure the fuse tap is properly inserted, and that the ground wire is securely attached to a metal surface.
• Radio Interference: Ensure the anti-interference cable is not coiled or placed near radio equipment. Re-route if necessary.
• Continuous Recording Not Working: Verify that the fuse tap is connected to a circuit that receives power even when the ignition is off.

Frequently Asked Questions (FAQs)

What does the hardwire kit do?

The hardwire kit enables your dash cam to receive continuous power from your vehicle's battery, allowing for 24/7 surveillance and freeing up your cigarette lighter port for other devices.

Will this kit drain my car battery?

The kit includes low voltage protection, which will cut off power to the dash cam if the car battery's voltage drops below a safe level, preventing battery drain.

Can this kit be used with devices other than dash cams?

Yes, the kit is compatible with any onboard Type C equipment, including mirror dash cams, radar detectors, and GPS devices.

Is the kit difficult to install?

While the kit is designed for easy installation with included tools and instructions, those unfamiliar with vehicle electrical systems may prefer to seek professional installation.

Does the hardwire kit fit all cars?

The included fuse tap cables cover the most common fuse types, catering to a wide range of vehicles. However, verify compatibility with your specific vehicle's fuse type before installation.

Is it necessary to use the installing crowbar?

The installing crowbar is provided to help safely remove and install fuses without damage. It is recommended to use this tool for the installation process.

Product Specifications

• Brand: navycrest
• Input Voltage: 12-28V
• Output Voltage: DC 5V / 2A
• Dimensions: 1 x 1 x 1 inches
• Weight: 5.9 ounces
• ASIN: B0B4W6S9FV
• Cable Length: 11.5ft
• Connectivity: USB Type C

Contact Information

For further assistance or inquiries, please refer to the manufacturer's customer service provided with your product purchase.

Please ensure to read and follow all safety instructions and guidelines provided with the product to ensure proper and safe use.

Q: What is included in the box?
A: The box includes a Type C hardwire kit, an installing crowbar, and fuse tap cables.

Q: Is this hardwire kit compatible with all dash cams?
A: The hardwire kit is suitable for the majority of onboard Type C equipment, such as dash cams, mirror dash cams, radar detectors, and GPS devices.

Q: Does this hardwire kit provide low voltage protection?
A: Yes, the hardwire kit has low voltage protection. It will automatically cut the power when it detects that the voltage is lower than the safety range.

Q: Can I use this hardwire kit to power other electrical appliances in my car?
A: Yes, this hardwire kit releases the car's cigarette lighter port, allowing you to accommodate more other electrical appliances in your car.

Q: Is the installation of this hardwire kit easy?
A: Yes, the installation is easy. The package includes an installing crowbar and fuse tap cables. However, it is recommended to read the guidance before installing or seek help from a car fix-up store if needed.

Q: What are the dimensions and weight of this product?
A: The product dimensions are 1 x 1 x 1 inches, and it weighs 5.9 ounces.

Q: What is the connectivity technology used by this hardwire kit?
A: The connectivity technology used by this hardwire kit is USB.

Q: Does this hardwire kit come with batteries?
A: No, batteries are not included with this product.

Q: What is the real angle of view provided by this dash cam?
A: This dash cam provides a real angle of view of 170 degrees.

Q: Can I mount this dash cam using adhesive?
A: Yes, the mounting type for this dash cam is adhesive mount.

Please note that the above information is based on the provided product details and may be subject to change or vary.