PECOLE Dog Training Collar PE-18 User Manual

Package Contents

• 1 x Remote Transmitter
• 1 x Receiver Collar
• 1 x Wrist Strap
• 4 x Contact Points (2 x Long + 2 x Short)
• 4 x Conductive Silicone Prongs
• 1 x Test Light Tool
• 1 x USB Charging Cable
• 1 x User Manual

Getting Started

1. Read the user manual thoroughly before using the product.
2. Charge the remote transmitter and receiver collar using the USB charging cable provided. The charging time is approximately 2-3 hours.
3. Attach the receiver collar to your dog's neck, ensuring it is snug but not too tight. You should be able to fit two fingers between the collar and your dog's neck comfortably.
4. Turn on the remote transmitter and receiver collar by pressing and holding the power button on each device.
5. Pair the remote transmitter with the receiver collar by pressing and holding the channel button (1-4) on the remote transmitter and the power button on the receiver collar simultaneously.

Training Modes

The PECOLE Dog Training Collar PE-18 offers three training modes:

• Beep
• Vibration (Level 0-9)
• Shock Static (Level 0-99)

Using the Training Modes

1. Select the desired training mode by pressing the corresponding button on the remote transmitter.
2. Adjust the intensity level of the vibration or shock static mode using the "+" and "-" buttons on the remote transmitter.
3. Press the channel button (1-4) to select the appropriate channel for your dog's receiver collar.
4. Press the training mode button again to activate the selected mode on your dog's receiver collar.

Safety Features

The remote transmitter is equipped with a security keypad lock to prevent accidental activation. To lock or unlock the keypad, press and hold the lock button on the side of the remote transmitter.

Charging and Battery Life

The remote transmitter and receiver collar both have rechargeable batteries. The charging time is approximately 2-3 hours, and the battery life lasts up to 12 days. The remote transmitter displays the battery levels for both devices, so you always know when it's time to recharge.

Waterproof Design

The receiver collar is IPX7 waterproof, allowing for training in various weather conditions. Please note that the remote transmitter is not waterproof and should be kept away from water.

Troubleshooting Tips

• If the remote transmitter and receiver collar are not pairing, ensure both devices are turned on and try the pairing process again.
• If the training modes are not activating on the receiver collar, ensure the security keypad lock is unlocked on the remote transmitter.
• If the receiver collar is not responding to the remote transmitter, ensure the correct channel is selected and the devices are within the 1600 ft range.
• If the battery life is not lasting as expected, ensure both devices are fully charged before use.

Frequently Asked Questions

Can I use this training collar for multiple dogs?

Yes, the remote transmitter has four channels, allowing you to control up to four receiver collars simultaneously. Each collar must be paired to the remote transmitter using the appropriate channel.

Is the shock static mode safe for my dog?

The shock static mode is adjustable from level 0-99, allowing you to choose the appropriate intensity for your dog. It is recommended to start with the lowest intensity and gradually increase as needed. Always observe your dog's reaction to ensure the training intensity is not too much.

How often should I use the training collar on my dog?

Avoid leaving the training collar on your dog for more than 12 hours a day. It is recommended to reposition the collar every 1 to 3 hours to prevent skin irritation.

Can the remote transmitter be used in wet conditions?

The remote transmitter is not waterproof and should be kept away from water. The receiver collar is IPX7 waterproof and can be used in wet conditions.

Does the collar fit all dog sizes and breeds?

The adjustable collar is suitable for all size breeds from 10 to 110 lbs. Simply adjust the collar to fit your dog's neck comfortably.

Q: Can I train both of my dogs at the same time?
A: Our dog training collar does not support controlling two dogs at the same time, but the dog training collar can control multiple dogs by switching channels. You may need to buy a separate collar for each dog.

Q: Will these fit my mini dachshund?
A: The dog training collar is suitable for 10-110lbs dogs. You can adjust the length of the collar according to your dog's size.

Q: How do I contact the seller? I’m missing the longer contacts and just want those replaced.
A: You can contact the seller through Amazon or by emailing [email protected].

Q: How do you turn the transmitter off?
A: The knob on the top turns it on and off.

Q: How do I know when the remote is fully charged?
A: Turn the knob on, there are bars like a cell phone signal. Both parts charge in a few hours.

Q: Can the receiver be used on another collar if the one provided is too small?
A: Yes, you can use the receiver on another collar.

Q: Why is my collar not charging?
A: Make sure that it is connected to the charging points properly. If you continue to have issues, contact customer support.

Q: Where can I go to get a third separate collar? We would like to add a collar to our new dog.
A: You can purchase additional collars through Amazon or by contacting PECOLE customer support.

Q: Can I place a custom order for a remote and three collars? The collar on its own shows unavailable.
A: It is unclear if custom orders are available. Contact customer support for more information.