WiFi Extender User Manual

Package Contents

• WiFi Extender (Model: AD1)
• User Manual

Product Overview

The 2022 Newest WiFi Extender is designed to boost your existing WiFi network, providing extended wireless coverage for up to 7860 Sq.ft and supporting up to 45 devices. The extender is compatible with any router, gateway, or access point and features an Ethernet port for wired connections.

Getting Started

1. Plug the WiFi extender into a power outlet close to your router. The power LED will light up.
2. Press the WPS button on your router.
3. Within 2 minutes, press the WPS button on the WiFi extender. The extender will start connecting to your router. Once connected, the LED lights on the extender will indicate its status.
4. Unplug the extender and move it to a location halfway between your router and the area with a weak WiFi signal. The location should be within the range of your router.
5. Plug the extender back into a power outlet and wait for the LED lights to turn on. The extender is now ready for use.

Connecting Devices to the Extender

Wireless devices can connect to the extender using the same WiFi network name (SSID) and password as your existing router. Wired devices can be connected to the Ethernet port on the extender.

Troubleshooting Tips

• If the extender is not connecting to your router, ensure both devices are within range and the WPS buttons were pressed within the 2-minute timeframe.
• If the extender's LED lights are not indicating a connection, try resetting the extender by pressing and holding the reset button for 10 seconds.
• If you're experiencing slow or intermittent connections, try moving the extender closer to your router or adjusting the antennas for better signal reception.

Frequently Asked Questions

How do I know if the extender is connected to my router?

The LED lights on the extender will indicate its connection status. If the lights are on, the extender is connected to your router.

Can I use multiple extenders with my router?

Yes, you can use multiple extenders to expand your WiFi coverage. However, each extender must be connected to your router individually using the WPS method described in the user manual.

What should I do if my devices cannot connect to the extender?

Ensure that your devices are within range of the extender and that they are using the correct WiFi network name (SSID) and password. If the issue persists, try resetting the extender and reconnecting your devices.

How can I change the WiFi network name (SSID) and password for the extender?

By default, the extender uses the same network name and password as your router. To change these settings, you will need to access the extender's control panel webpage by performing a factory reset and following the setup process again.

Product FAQ:

Q: How many devices can this WiFi extender connect to?
A: The WiFi extender can connect up to 45 devices, including smartphones, laptops, tablets, game consoles, IP cameras, and more.

Q: Can this WiFi extender eliminate WiFi dead zones?
A: Yes, it can eliminate WiFi dead zones and provide a lag-free connection to any type of device, including wired devices via the Fast Ethernet port.

Q: Is this WiFi extender compatible with any router or access point?
A: Yes, it is universally compatible with any router, gateway, or access point.

Q: How far does the WiFi range of this extender cover?
A: The WiFi range of this extender covers up to 7860 sq.ft and 40 devices.

Q: Is the setup process easy?
A: Yes, the setup process is easy and takes only a few minutes. The smart indicator light helps with installation.

Q: Does this WiFi extender increase internet speed?
A: It is not specified if it increases internet speed.

Q: Can this WiFi extender be used outdoors in rain and weather?
A: Yes, it can be used outdoors.

Q: How do I connect the Ethernet wire to this WiFi extender?
A: The Ethernet wire looks like a phone cord.

Q: What is the input voltage for this product?
A: The product specification states that the input voltage is 240 volts.

Q: Where is the best place to plug in the WiFi extender?
A: It can be plugged in anywhere between the router and the furthest device or in a separate room from the router.

Note: Some customers had difficulty setting up the product and recommend checking YouTube videos for correct installation steps.