HitLights LED Strip Connector Kit - 2Pin 10mm
HitLights LED Strip Connector User Manual
Product Overview
Welcome to the HitLights LED Strip Connector Kit! This kit is designed for easy, solderless connection of single color LED strips, specifically 10mm COB and SMD 2835 LED strips. The package includes various connectors to meet your LED strip lighting needs.
Package Contents
- 6 x Solderless Gapless Connectors
- 4 x LED Jumper Connector
- 2 x Female and DC Connector
- 2 x Connector with Pigtail
- 1 x 2-way DC Splitter
Installation Instructions
- Ensure your LED strip is 10mm wide and has a 2-pin configuration suitable for the connectors.
- Identify the positive (+) and negative (-) terminals on both the LED strip and the connector.
- Open the connector clamp.
- Align the LED strip with the connector terminals, ensuring that the positive and negative marks match.
- Gently slide the LED strip into the connector. For gapless connectors, ensure that the strip is fully seated.
- Close the connector clamp securely to ensure a solid connection.
- For jumper connectors, repeat the process for the second strip or wire.
- Connect the DC female connector to your power supply and the other end to the LED strip or splitter if necessary.
Troubleshooting Tips
- If the LED strip does not light up, check that the strip is correctly aligned with the polarity of the connector.
- Ensure the connector clamp is fully closed to secure the LED strip in place.
- Inspect the LED strip and connectors for any signs of damage.
- Check all connections, including the power supply and any splitters used.
- For issues with extension wires, ensure solid wires are used for better connectivity.
Frequently Asked Questions (FAQ)
Q: Can I use these connectors with RGB LED
strips?
A: No, these connectors are designed for 2-pin
10mm single color LED strips only.
Q: Do I need to solder anything for
installation?
A: No, this kit is designed for solderless
connections. However, ensure a firm connection is made when closing
the connector clamp.
Q: How do I ensure a secure connection with
the connectors?
A: Make sure the LED strip is properly aligned
and fully inserted into the connector. Then, close the clamp firmly
to secure the strip in place.
Q: What should I do if the LED strips keep
disconnecting?
A: Check if the LED strip is buckling or
bunching up when inserted. If so, try wiggling the strip gently as
you insert it to ensure it slides under the connector's leads
properly.
Q: Are these connectors waterproof?
A: No, these connectors are not waterproof. If
you need a waterproof solution, you may need to apply a silicone
sealant around the connectors after installation.
Q: Can I cut the LED strip to fit my
installation?
A: Yes, LED strips can be cut at designated cut
lines. When using connectors, cut the strip so that most of the
copper pads are available for a secure connection.
FAQ [continued]
Q: What size LED strips are these connectors designed for?A: These connectors are designed for 10mm COB Single Color LED Strips and SMD 2835 White LED Strip Lights.
Q: What is included in the package?
A: The package includes 6 x Solderless Gapless Connectors, 4 x LED Jumper Connector, 2 x Female and DC Connector, 2 x Connector with Pigtail, and 1x 2-way DC Splitters.
Q: Can these connectors be used for any type of LED strip lights?
A: These connectors are specifically designed for 10mm COB Single Color LED Strips and SMD 2835 White LED Strip Lights.
Q: Are these connectors easy to install?
A: Yes, installation is simple. You just need to connect the positive and negative terminals of the connector, slot the strip light into the connector, and clamp the cover. No welding or other processes are required.
Q: Is this product backed by a warranty?
A: Yes, this product is backed by a one-year warranty from HitLights. You can contact their US-based customer service team for troubleshooting, replacement, or any questions about purchasing or installation.
Q: What is the wattage of these connectors?
A: The wattage of these connectors is 72 watts.
Q: Can these connectors be used for outdoor applications?
A: These connectors are designed for indoor use only.
Q: Are these connectors compatible with other brands of LED strip lights?
A: These connectors are universal and can be used with most 10mm COB Single Color LED Strips and SMD 2835 White LED Strip Lights. However, compatibility may vary depending on the specific brand and model of LED strip lights.
Q: Are these connectors waterproof?
A: These connectors are not waterproof by themselves. If you need to use them in wet or outdoor environments, additional waterproofing measures may be required.
Q: What is the color of the LED light?
A: The LED light color is warm white.
Q: Can these connectors be used for dimmable LED strip lights?
A: These connectors are designed for single color LED strip lights and may not be compatible with dimmable LED strip lights. It is recommended to check the specifications of your specific LED strip lights before using these connectors.
Specifications
| Brand | HitLights |
| Manufacturer | HitLights |
| Model Number | CON-8mm 10mm-FT |
| Category | Tools & Home Improvement > Lighting & Ceiling Fans > Ceiling Lights > Track Lighting > Connectors |
| Color | 2 Pin 10mm Kit |
| Brand | HitLights |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Light Color | Warm White |
| Theme | Indoor |
| Style | Modern |
| Material | Plastic |
| Number of Light Sources | 2835 |
| Wattage | 72 watts |
| Included Components | Light kit inlcuded |
| Item Weight | 0.05 Kilograms |
| Number of Items | 1 |
| Item Dimensions LxWxH | 7.87 x 4.33 x 0.79 inches |
| Manufacturer | HitLights |
| Part Number | CON-KIT |
| Item Weight | 1.76 ounces |
| Product Dimensions | 7.87 x 4.33 x 0.79 inches |
| Country of Origin | China |
| Item model number | CON-8mm 10mm-FT |
| Assembled Height | 2 centimeters |
| Assembled Length | 20 centimeters |
| Assembled Width | 11 centimeters |
| Batteries Included? | No |
| Batteries Required? | No |
| ASIN | B0B99HV1QC |
| Customer Reviews | 4.3 4.3 out of 5 stars 2,065 ratings 4.3 out of 5 stars |
| Best Sellers Rank | #10,021 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #10 in Track Lighting Connectors |
| Date First Available | March 11, 2021 |
| Product Dimensions | 7.87 x 4.33 x 0.79 inches; 1.76 Ounces |
| Item model number | CON-8mm 10mm-FT |
| Country of Origin | China |
| Color | 2 Pin 10mm Kit |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Light Color | Warm White |
| Theme | Indoor |
| Style | Modern |
| Material | Plastic |
| Number of Light Sources | 2835 |
| Wattage | 72 watts |
| Color | Warm White |
| Weight | 1.76 ounces |
| Dimensions | 7.87 x 4.33 x 0.79 inches |
| First Available | March 11, 2021 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.