Superboost WiFi Extender Range Booster User Manual

Package Contents

• 1 x Superboost WiFi Extender Range Booster
• 1 x Ethernet Cable
• 1 x User Manual

Product Overview

The Superboost WiFi Extender Range Booster is designed to extend and amplify your existing Wi-Fi signal, eliminating dead zones and improving connection quality throughout your home and yard. It is compatible with any router and supports up to 40 devices connected online.

Getting Started

1. Plug the WiFi extender into an electrical outlet near your router.
2. Wait for the power LED to turn solid green, indicating that the extender is powered on.
3. Press the WPS button on the WiFi extender. The WPS LED will start blinking.
4. Within two minutes, press the WPS button on your router. The WPS LED on the extender will turn solid green when a connection is established.
5. Unplug the WiFi extender and move it to a location halfway between your router and the area with a weak Wi-Fi signal. The location should be within the range of your existing Wi-Fi network.
6. Plug the extender back into an electrical outlet and wait for the power LED to turn solid green.
7. Connect your devices to the extended Wi-Fi network using the same Wi-Fi name and password as your existing network.

Troubleshooting Tips

1. If the extender's power LED does not turn on, ensure it is securely plugged into an electrical outlet and that the outlet is functioning properly.
2. If the WPS LED does not blink when the WPS button is pressed, try pressing the button again or resetting the extender by using a pin to press the reset button for 10 seconds.
3. If the extender does not establish a connection with your router, try moving it closer to the router and repeating the WPS process.
4. If your devices cannot connect to the extended Wi-Fi network, ensure you are using the correct Wi-Fi name and password.
5. If the Wi-Fi signal is still weak or unstable in certain areas, try adjusting the position of the extender or its antennas to improve coverage.

Frequently Asked Questions

Can I use multiple extenders with my Wi-Fi network?

Yes, you can use multiple extenders to further expand the coverage of your Wi-Fi network. However, it is recommended to use one extender for every two rooms or areas that require extended coverage.

Do I need to change my Wi-Fi password when using the extender?

No, the extender uses the same Wi-Fi name and password as your existing network. Connect your devices to the extended network using the same credentials.

Can I use the extender with a different brand of router?

Yes, the Superboost WiFi Extender Range Booster is compatible with any router that supports the 802.11a/b/g/n wireless communication standard.

How can I improve the performance of the extender?

For optimal performance, place the extender halfway between your router and the area with a weak Wi-Fi signal. Ensure there are no large obstacles or interference sources, such as concrete walls or electronic appliances, between the extender and the router or devices.

Can I use the Ethernet port on the extender to connect wired devices?

Yes, you can connect wired devices, such as gaming consoles or desktop PCs, to the Ethernet port on the extender for a stable and fast internet connection.

Q: Will this WiFi extender provide a reliable signal outside my house?
A: Yes, it will. It extends your current WiFi network and you will see a "plus" at the end of your WiFi name when installed. Select the "plus" when in spotty areas and you'll be good to go.

Q: Will this work with broadband? And will it work in a metal building?
A: Yes, it will work with broadband. If your router is getting the signal, it will also work in a metal building. However, you may need to use an antenna that is above the roof and run a cable into the router.

Q: I followed all the steps exactly, connected the extender to WiFi and can connect to it but it says "no internet access" even when right next to it?
A: You either need to set it up with a router or reset the main router.

Q: My router does not have a WPS button. Can I set this up manually?
A: Yes, you can easily install the extender manually through a web browser.

Q: Will this send signal 100ft to my garage?
A: Yes, it will.

Q: Can you have more than one of these in your house?
A: Yes, you can have multiple units. Each one will be set up separately and will have its own pairing address.

Q: I have an Eero on my router. Will this still work or is the Eero good enough?
A: Press the WPS button near the jack to have the extender communicate with your wireless router. If it connects, you should see the name of your new router/network with a plus behind it.

Q: When I tried to set up my extender it asks for my debit card number. Why?
A: We do not remember it asking for any personal information. Please try again.

Q: Does this work with Verizon Fios?
A: Yes, it works with Verizon Fios.

Overall, this WiFi extender is a fantastic product. It was shipped quickly and has a sleek design that blends into the wall. Connecting and installing the device was easy and required very few steps. It works great for extending WiFi inside the home and even outside. The signal extension has been an amazing upgrade to the standard issue router, and the Ethernet cable input is also a great feature. The latest encryption protocols WEP/WPA/WPA2 and regular security updates keep your financial and personal data super protected. Highly recommended!