BIETRUN RGB Karaoke Speaker Machine YX02 User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Getting Started
4. Operating Instructions
5. Troubleshooting Tips
6. Frequently Asked Questions
7. Warranty Information

1. Introduction

Thank you for purchasing the BIETRUN RGB Karaoke Speaker Machine YX02. This karaoke machine is designed to provide you with high-quality sound and a captivating light show, making it perfect for parties, barbecues, camping, picnics, or any other event where you want to enjoy music. This user manual will guide you through the setup and operation of your new karaoke machine. Please read it carefully before using the product.

2. Package Contents

• 1 x Speaker
• 1 x Adapter (13.5V/1.7A)
• 1 x Wired Microphone
• 1 x Remote Control
• 1 x User Manual

Note: Two AAA batteries (not included) are required for the remote control.

3. Getting Started

1. Place the speaker on a stable, flat surface.
2. Connect the included adapter to the speaker and plug it into a power outlet to charge the built-in 6000mAh lithium battery. The battery takes approximately 6 hours to fully charge.
3. Insert the wired microphone's plug into the 6.35mm MIC port on the speaker.
4. Insert two AAA batteries (not included) into the remote control.

4. Operating Instructions

Power On/Off

Press the power button on the speaker or the remote control to turn the speaker on or off.

LED Light Control

Press the light button on the speaker or the remote control to turn the LED lights on or off. Short press the LED MODE button to cycle through the 6 different lighting effects.

Mode Selection

Short press the MODE button on the speaker or the remote control to switch between Bluetooth, AUX, FM, TF, and USB input modes.

Bluetooth Connection

1. Short press the MODE button to switch to Bluetooth mode. The display will show "bLUE" and flash.
2. On your Bluetooth-enabled device, search for "YX02" and pair with the speaker.

AUX/RCA Input

Connect a 3.5mm cable (AUX IN) or RCA cable (AUDIO IN) to your device (phone, TV, laptop, etc.) and plug it into the corresponding input port on the speaker.

TF Card/USB Input

Insert a TF card or USB flash drive into the appropriate slot on the speaker to play music.

Volume and Sound Control

Use the MIC.VOL and MIC.ECHO knobs to adjust the microphone volume and echo effect. Use the BASS.VOL and TREBLE.VOL knobs to adjust the speaker's bass and treble levels.

Recording and Playback

Long press the REC REPLAY button for 3 seconds to start recording. Short press the button to play back the recorded file.

TWS Connection

To connect another YX02 speaker wirelessly via TWS, play music on the host speaker and long press the TWS button on the auxiliary speaker for 3 seconds to pair. Music will play synchronously on both speakers once paired.

5. Troubleshooting Tips

• If the speaker is not producing sound, make sure it is turned on and the volume is turned up.
• If the Bluetooth connection is not working, ensure the speaker is in Bluetooth mode and your device is within 20 meters of the speaker.
• If the LED lights are not working, make sure the light button on the speaker or remote control is turned on.
• If the remote control is not working, check that the batteries are installed correctly and have sufficient power.

6. Frequently Asked Questions

Q: Can I connect a wireless microphone to this speaker?

A: Yes, you can connect a wireless microphone with a 6.35mm receiver to the speaker. We recommend using Bietrun wireless microphones, such as wxm02, wxm04, wxm09A, wxm09, wxm19A, wxm19, and wxm21.

Q: Can I use the speaker while it is charging?

A: Yes, you can use the speaker while it is connected to the adapter and charging.

Q: How long does the battery last?

A: The built-in 6000mAh lithium battery lasts for 3 hours at maximum volume and lights, 6 hours at medium volume and lights, and 30 hours at medium volume and no lights when fully charged.

Q: Can I connect multiple input sources at the same time?

A: No, you can only choose one of the audio inputs (AUDIO IN, AUX IN, or BLUETOOTH) at a time.

7. Warranty Information

We provide a 1-year warranty for the BIETRUN RGB Karaoke Speaker Machine YX02. If you encounter any issues with the product during this period, please contact our customer support for assistance.

Q: What are the dimensions and weight of the Bietrun YX02 karaoke speaker machine?
A: The speaker measures 14.4 x 14 x 33 inches and weighs 22 lbs.

Q: What is the power source of the karaoke machine?
A: The speaker is battery-powered with a built-in 6000mAh rechargeable lithium battery. It can also be plugged into an external power source using the included adapter.

Q: What is the output wattage of the speaker?
A: The speaker has an output power of RMS 200W to 650W Peak Power.

Q: What are the different input modes supported by the speaker?
A: The speaker supports Bluetooth 5.0, AUX IN, TF Card, USB, and RCA IN input modes.

Q: How long does the battery last on a single charge?
A: The battery can last up to 3 hours at maximum volume and lights, 6 hours at medium volume and lights, and up to 30 hours at medium volume with no lights when fully charged.

Q: Can another speaker be connected to make the sound louder?
A: Yes, another YX02 wireless speaker can be connected via TWS for synchronous playback.

Q: What type of microphone is included with the karaoke machine?
A: A wired microphone is included with the speaker. It also supports wireless mics with a 6.35mm receiver.

Q: Is there a warranty provided for this product?
A: Yes, Bietrun provides a 1-year warranty for this product.

Q: How many lighting effects are built into the karaoke machine?
A: There are six different lighting effects built into the speaker, along with 139 lamps that change colors with different melodies and tunes.