SYNCWIRE Câble Type 2 7.2kW 8m 32A Monophasé
User Manual for SYNCWIRE Type 2 EV Charging Cable 7.2kW 8m 32A
The SYNCWIRE Type 2 EV Charging Cable is designed to provide a
safe and efficient charging solution for your electric vehicle (EV)
or plug-in hybrid electric vehicle (PHEV). With its durable
construction, it is able to withstand various environmental
conditions and frequent use.
- Brand: SYNCWIRE
- Category: Auto et Moto > Outils et dépannage >
Équipements garage et atelier > Équipement de charge véhicule
électrique > Accessoires de station de charge
- Color: Black
- Length: 8 meters
- Current: 32A Monophase
- Power Output: Up to 7.2 kW
- Temperature Range: -35°C to +50°C
- IP Rating: IP54
- Compatibility: Type 2 and CCS2 EV and PHEV charging ports
Instructions for Use
- Ensure your EV/PHEV is compatible with Type 2 charging
- Locate a Type 2 charging station.
- Remove the charging cable from the provided storage bag.
- Connect one end of the cable to the charging station.
- Connect the other end of the cable to your vehicle's charging
- Initiate the charging process according to your vehicle's
instructions or the charging station's interface.
- Once charging is complete, disconnect the cable starting with
the vehicle's end, then the charging station's end.
- Use the provided velcro straps and unique folding mark to
neatly coil the cable.
- Store the cable in the waterproof storage bag using the
high-quality zipper for protection.
- Keep the cable clean with the included high-quality flannel
- Cable Not Charging: Ensure both connections
are secure and the charging station is operational.
- Overheating: It is normal for the cable to
become slightly warm during charging. If it becomes excessively
hot, discontinue use and consult a technician.
- Connector Dirt or Moisture: Clean and dry the
connectors thoroughly before use. The cable has short-circuit
protection that activates if the connector is wet.
Frequently Asked Questions (FAQ)
Is this cable compatible with all EV models?
The SYNCWIRE Type 2 EV Charging Cable is compatible with EVs and
PHEVs that have Type 2 and CCS2 charging ports. It is not
compatible with Type 1, CCS1, CHAdeMO, and GB/T charging ports.
How long does it take to fully charge a vehicle with this
Charging times vary based on the vehicle's battery capacity and
the charging station's output. For example, it takes approximately
6.5 hours to fully charge a Kona Electric 39 kWh or 7 hours for a
Niro using a suitable charging station.
What is the maximum power output of this cable?
The SYNCWIRE Type 2 EV Charging Cable supports charging up to
32A at 7.2 kW for 3.7 kW-supported vehicles.
Can I clean the cable and storage bag?
Yes, you can easily clean the cable and waterproof storage bag
with the included high-quality flannel cloth. The rubber caps
prevent the connectors from getting dirty and wet.
Is the cable durable and weather-resistant?
Yes, the cable is IP54 rated, indicating it is dust and splash
resistant. It is also built to withstand temperatures ranging from
-35°C to +50°C, and it has been tested for durability with over
10,000 plug-in tests, 20,000 bending tests, and a 2-ton load
What is included with the cable?
The cable comes with two removable velcro straps, a portable
waterproof storage bag, a high-quality zipper, a clear power output
indicator sticker, and a high-quality flannel cleaning cloth.
How should I store the cable?
After use, coil the cable using the unique folding mark and
secure it with the velcro straps. Store it in the waterproof bag
provided to protect it from dirt and moisture.
What certifications does this cable have?
The SYNCWIRE Type 2 EV Charging Cable is IP54 certified and has
passed TÜV Rheinland standards for safety and quality.
Q: What is the compatibility of the SYNCWIRE Type 2 cable?
A: The SYNCWIRE Type 2 cable is compatible with all electric and
plug-in hybrid vehicles with Type 2 and CCS2 charging sockets,
including models such as Tesla Model S/3/X/Y, BMW i3/i4/iX3,
Volkswagen ID.3/ID.4/ID.5, Audi e-Tron, Hyundai Kona Electric, Kia
e-Niro, Nissan Leaf (40 kWh), Peugeot e-208, Skoda ENYAQ, and
Q: Is the cable durable and resistant to shocks?
A: Yes, the SYNCWIRE Type 2 cable is designed to be durable and
resistant to shocks. It is IP54 rated and meets TÜV Rheinland
standards. It can withstand temperatures ranging from -35°C to
+50°C. The cable has been tested for over 10,000 plug-in tests,
over 20,000 bending tests, and can withstand a charging pressure of
up to 2 tons.
Q: How long is the cable?
A: The SYNCWIRE Type 2 cable has a length of 8 meters (26
Q: Does the cable support fast charging?
A: Yes, the SYNCWIRE Type 2 cable supports charging speeds of up to
32A and 7.2 kW (3.7 kW supported). It can fully charge a Kona
Electric 39 kWh in approximately 6.5 hours or a Niro with an
appropriate charging station in about 7 hours.
Q: Is it easy to store and clean the cable?
A: Yes, the cable is easy to store thanks to its unique folding
mark and two removable Velcro straps. It comes with a portable
waterproof storage bag. The cable can be easily cleaned using the
included high-quality flannel cloth. Rubber caps are also provided
to prevent the connectors from getting dirty or wet.
Q: Is the SYNCWIRE Type 2 cable compatible with all charging socket
A: No, the SYNCWIRE Type 2 cable is not compatible with Type 1,
CCS1, CHAdeMO, and GB/T charging sockets. It is specifically
designed for Type 2 and CCS2 charging sockets.
Q: What certifications does the SYNCWIRE Type 2 cable have?
A: The SYNCWIRE Type 2 cable is certified by TÜV Rheinland and
meets IP54 standards for durability and resistance to shocks.
Q: What color is the cable?
A: The SYNCWIRE Type 2 cable is black in color.
Q: How many units of the cable are included in the package?
A: The package includes one unit of the SYNCWIRE Type 2 cable.
Q: Are there any customer reviews for this product?
A: Yes, here are some customer reviews for the SYNCWIRE Type 2
- "Works very well. An 8-meter cable that works perfectly for
charging an Audi GT e-tron. No complaints. It can be easily wrapped
around the support without any difficulty."
- "Quality cable. I can only judge the aesthetic aspect of this
cable for now as it arrived before my car, which has not been
delivered yet! This cable comes in a quality pouch. It is also much
cheaper than the one offered by the DAC brand: €104 compared to
€265, for the same length and usage but without the protective
- "Useful and good quality. Well-wrapped 8-meter cable with two
straps and a bag. Takes up little space. Works properly."
- "Great quality but a bit expensive. Really great quality! The
finishes are clean, and the cable is flexible. No issues with
connectivity to the car. However, for €100 at Tesla, you can get
the same length and quality."
- "Perfect for electric car charging. Comes with a storage case and
- "Very good quality. Comes with a waterproof bag. The overall
quality is impeccable. You can tell that the components and
materials are of good quality and will last over time. Once
connected, there is no play, and the cable does not heat up. It's a
very good quality product, with Velcro straps for proper coiling of
the cable and to prevent damage, a high-quality cloth to keep it
clean, and finally, a good-quality bag to always keep it in the
same place in the trunk. A product at a reasonable price
considering the quality."
- "Superb quality but a bit expensive. Personally, I think this
cable is an excellent choice for electric vehicle charging. Its
compatibility with many popular models, adequate charging power,
and convenient length make it a very practical accessory. It
charges well, no issues with connectivity, and the presentation is
neat and of high quality. However, it is possible to find slightly
cheaper options of the same quality without the convenience of
- "Excellent quality cable. The cable comes in a square fabric
storage case with a non-slip back. The opening gives a feeling of
extreme quality. Inside, there is a very detailed and clean user
manual, as well as a flocked microfiber cloth branded by SyncWire.
The cord is perfectly wrapped in a plastic bag and held together
with 2 Velcro cable ties. To ensure that it fits perfectly in the
case every time, it has a marking whose use is explained in the
user manual. To avoid any confusion, the maximum power accepted by
the cable is written in fluorescent green on each of the
connectors. This cable has a 7.2 kW (32A) capacity, which is ideal
for home charging stations. The cable is 5 meters long and is
composed of 3 wires of 6mm2 and 2 of 0.5mm2."
- "Short cable of high quality for plug-in cars. I bought it to
replace the one provided with the new Toyota Prius
|Auto et Moto > Outils et dépannage > Équipements garage et atelier > Équipement de charge véhicule électrique > Accessoires de station de charge
|【Très durable et résistant aux chocs】【Facile à ranger】【Facile à nettoyer】【Compatibilité étendue】【Convivial】【Charge ultra-rapide】【Étanche IP54】【Certification TUV】 Voir plus
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.