Siemens Boltshield FSPD036 Surge Protector User Manual
Installation Instructions
- Switch off the main circuit breaker in your electrical panel to ensure safety during installation.
- Mount the Siemens Boltshield FSPD036 Surge Protector externally next to your electrical gear or inside the load center, ensuring that the enclosure is suitable for type 4 outdoor use.
- Connect the surge protector to a dedicated 20-30A 240V circuit breaker in the electric panel using the wires provided.
- Ensure all connections are tight and secure to prevent any arcing or overheating.
- Once connected, switch on the circuit breaker and check the LED indicator on the surge protector to verify that it is functioning correctly. The LED should be ON, indicating active protection.
- Keep the receipt of your purchase securely, as it is required for the 3-year $10K equipment protection warranty.
Troubleshooting Tips
- No LED Indicator: If the LED indicator is OFF, ensure the circuit breaker is switched on and check the wiring connections.
- Frequent Tripping: If the surge protector trips frequently, it may be experiencing surges beyond its capacity, or there could be an issue with the electrical system. Consult a professional electrician.
- Physical Damage: Do not attempt to use the surge protector if it has visible damage. Replace it to ensure proper protection.
Frequently Asked Questions (FAQs)
What is the surge current protection rating for this device?
The Siemens Boltshield FSPD036 Surge Protector is rated for 36,000 Amps surge current protection.
Can this surge protector be installed indoors?
Yes, the enclosure is rated for type 4 outdoor use but it can also be installed inside the load center.
What type of breaker is needed for installing this surge protector?
A dedicated 20-30A 240V breaker is required for installation.
Does this surge protector come with a warranty?
Yes, it comes with a 3-year $10K equipment protection warranty. Remember to keep your receipt as proof of purchase for warranty claims.
How can I monitor the protection status of the device?
The surge protector has an LED indicator that shows the ON/OFF protection status.
What should I do if the surge protector is not working?
Refer to the troubleshooting section above for common issues and solutions. If the problem persists, contact Siemens customer support for assistance.
FAQ [continued]
**Product FAQ: Siemens Boltshield FSPD036 Level 2 Whole House Surge Protection Device****Q: What is the surge current protection rating of the Siemens Boltshield FSPD036 surge protection device?**
A: The Siemens Boltshield FSPD036 offers surge current protection rated for 36,000 Amps.
**Q: Can the Siemens Boltshield FSPD036 be used for whole house surge protection?**
A: Yes, this surge protection device is designed for whole house surge protection.
**Q: What are the monitoring features of the Siemens Boltshield FSPD036?**
A: The device features LED ON/OFF protection status monitoring for easy visual indication.
**Q: Is the Siemens Boltshield FSPD036 suitable for outdoor installation?**
A: Yes, the enclosure is rated for type 4 outdoor use, but it can also be installed inside the load center.
**Q: What are the electrical specifications of the Siemens Boltshield FSPD036?**
A: The device operates at 120/240V and requires a dedicated 20-30A 240V breaker in the electric panel for installation.
**Q: Does the Siemens Boltshield FSPD036 come with any warranty?**
A: Yes, it comes with a 3-year $10K equipment protection warranty. However, note that there is no registration required with Siemens.
**Q: What are some key features of the Siemens Boltshield FSPD036 surge protection device?**
A: This device is external parallel connected for mounting next to electrical gear, has a green color, and includes wires for connecting to a breaker.
**Q: Where is the Siemens Boltshield FSPD036 manufactured?**
A: This product is manufactured in the USA.
**Q: What are some recommended uses for the Siemens Boltshield FSPD036?**
A: The product is recommended for monitoring and providing surge protection for electronics and electrical systems.
Specifications
| Brand | SIEMENS |
| Manufacturer | Siemens |
| Model Number | FSPD036 |
| Category | Electronics > Accessories & Supplies > Power Strips & Surge Protectors > Surge Protectors |
| Package Dimensions | 9.33 x 4.69 x 3.46 inches |
| Item Weight | 9.6 ounces |
| ASIN | B0BN6PTKLL |
| Item model number | FSPD036 |
| Customer Reviews | 4.8 4.8 out of 5 stars 19 ratings 4.8 out of 5 stars |
| Best Sellers Rank | #17,415 in Electronics (See Top 100 in Electronics) #160 in Surge Protectors |
| Date First Available | November 23, 2022 |
| Country of Origin | USA |
| Color | Green |
| Voltage | 240 Volts |
| Special Feature | Surge Protection |
| Recommended Uses For Product | Monitoring |
| Weight | 9.6 ounces |
| First Available | November 23, 2022 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.