HPBS Jump Starter H2000 User Manual

Getting Started

Thank you for purchasing the HPBS Jump Starter H2000. Please read the following instructions carefully before using the product to ensure safe and proper operation.

Charging Your Jump Starter

Connect the provided Type-C cable to the jump starter's input port.
Connect the other end of the cable to a suitable USB power adapter (not included).
The LCD display will show the current battery level as it charges.
Charge until the battery level indicates 100% for optimal performance.

Jump Starting a Vehicle

Ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.
Turn off all electronics and the vehicle's engine.
Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery terminal or a grounded metal component.
Power on the jump starter by pressing the power button.
The LCD display will show the status of the jump starter.
If all connections are secure and the display shows it is ready, start the vehicle's engine.
Once the vehicle starts, disconnect the jump starter immediately, starting with the black clamp, followed by the red clamp.

Using the LED Flashlight

Press and hold the power button for 3 seconds to turn on the flashlight.
Press the power button to cycle through the modes: flashlight, SOS, and strobe.
Press and hold the power button again to turn off the flashlight.

Troubleshooting Tips

Jump Starter Won't Charge: Check the cable connections and ensure you are using a compatible power adapter. If the issue persists, contact customer service.
Jump Starter Won't Start Vehicle: Ensure clamps are connected correctly, the jump starter is sufficiently charged, and the vehicle's battery is not beyond repair. If the problem continues, refer to the safety features section to ensure no safety protocols are preventing the start.
LED Flashlight Not Working: Make sure the jump starter is charged. If it still doesn't work, contact customer service for assistance.

Frequently Asked Questions (FAQs)

What type of vehicles can the HPBS H2000 jump-start?

The HPBS H2000 can jump-start 12V vehicles with up to 8L gas or 6.5L diesel engines.

How many times can I jump-start my vehicle on a single charge?

The HPBS H2000 can perform up to 40 jump starts on a fully charged battery, depending on the condition of the vehicle's battery and other factors.

How do I know if the jump starter is ready to use?

The 3.0" LCD display will provide you with all the necessary information, including battery level and connection status.

What safety features does the HPBS H2000 have?

The jump starter includes protections against short circuits, over-temperature, over-charge, over-discharge, reverse polarity, and more.

Can I charge other devices with the HPBS H2000?

Yes, it features a USB 5V 2.4A output and a USB 5V/9V/12V Quick Charge output for charging mobile devices.

What is the operating temperature range for the HPBS H2000?

The jump starter can operate in extreme environments from -4°F to 140°F.

How do I contact customer service if I have an issue?

HPBS offers 7 x 24h customer service. Please refer to your product documentation for contact details or visit the official HPBS website.

FAQ [continued]

Q: What is the peak amperage of the HPBS Jump Starter?
A: The HPBS Jump Starter has a peak amperage of 2000A.

Q: What size of vehicles can this jump starter handle?
A: This jump starter can easily jump-start vehicles with up to 8L gas engines or 6.5L diesel engines.

Q: How quickly can this jump starter start a vehicle?
A: The HPBS Jump Starter can start a vehicle in just 1-2 seconds.

Q: Does this jump starter have a display?
A: Yes, it features an upgraded 3.0" LCD display that clearly shows all the necessary information.

Q: Is this jump starter safe to use?
A: Yes, it has advanced intelligent clamps with 10 different safety features, including protection against short circuits, over-temperature, over-charge, over-discharge, reverse polarity, and more.

Q: What other functions does this jump starter have?
A: In addition to jump-starting vehicles, this jump starter can also be used as a mobile power bank with USB charging ports. It also has an LED flashlight with three modes (flashlight, SOS, strobe).

Q: Can this jump starter be used in extreme temperatures?
A: Yes, it is designed to work in temperatures ranging from -4°F to 140°F.

Q: What is the warranty for this product?
A: HPBS offers a 2-year product quality assurance and 24/7 customer service for this jump starter battery pack.

Specifications

Brand	HPBS
Category	Automotive Parts & Accessories > Automotive > Tools & Equipment > Jump Starters, Battery Chargers & Portable Power > Jump Starters
Product Dimensions	7.08"D x 3.14"W x 1.77"H
Item Weight	1.21 Pounds
Amperage	2000 Amps
Peak Output Current	2000 Amps
Weight	1.21 Pounds
Dimensions	7.08"D x 3.14"W x 1.77"H

The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.