Flacchi C9 Christmas String Lights User Manual

Product Overview

Thank you for purchasing the Flacchi C9 Christmas String Lights. These RGB color-changing fairy lights are equipped with a remote control and multiple lighting modes, making them perfect for both indoor and outdoor decoration. Before you begin, please ensure that you have removed the insulation sheet from the remote control.

Installation Instructions

1. Choose a suitable location for your lights, ensuring that the power adapter and electric transformer are protected from water if used outdoors.
2. Unravel the string lights carefully to avoid tangling.
3. Secure the lights in your desired position using hooks or ties, ensuring they are evenly spaced for the best effect.
4. Connect up to 3 sets of lights together, if needed, for a total of 300 lights.
5. Plug the lights into a power outlet. The lights are now ready to be used.

Remote Control Operation

The remote control has a range of up to 26.25ft. Make sure you point it directly at the control box for optimal use.

• Power: Turn the lights on or off.
• Dimmer: Press DIM up/down to adjust brightness and speed.
• Timer: Set the lights to turn off after 4H, 6H, or 8H. Press TIMER OFF to cancel.
• Modes: Choose from 24 lighting modes including solid, dual, triple, or colored options.

Troubleshooting Tips

• If the remote control is not working, ensure that the insulation sheet has been removed and the remote's batteries are fresh.
• If the lights are not turning on, check the power connection and ensure that the lights are plugged into a functioning power outlet.
• If one set of lights in a daisy chain does not work, check the connections between the sets and ensure that they are securely connected.
• If the lights are not bright or one bulb goes out, please note that individual bulbs are not replaceable. Check for any damage to the string and consider contacting customer support for assistance.
• If the lights are not responding to the remote, ensure there are no obstructions between the remote and the control box and that you are within the operational range.

Frequently Asked Questions (FAQs)

How do I change the lighting modes?

Press the MODE button on the remote control to cycle through the 24 available lighting modes.

Can I use one remote for multiple sets of lights?

Yes, you can use one remote for multiple sets of lights as long as they are within range and are the same model.

Are the lights waterproof?

Yes, the lights are rated IP44 waterproof, but the power adapter and electric transformer should be protected from water.

What do I do if a bulb burns out?

The LED bulbs are not replaceable. If a bulb burns out, the rest of the lights will continue to function. If multiple bulbs burn out or the string is damaged, please contact customer support.

How do I set the timer function?

Press the 4H, 6H, or 8H button to set the timer. The lights will turn on for the duration selected and then turn off automatically. Press TIMER OFF to cancel the timer.