User Manual for Disney Lilo and Stitch Wireless Bluetooth Speaker

Getting Started

1. Unpack your Disney Lilo and Stitch Bluetooth Speaker, USB Charging Cable, Backup AUX Cable, and Owner’s Manual from the box.
2. Charge the speaker using the provided USB Charging Cable. Connect one end to the speaker and the other end to a USB power source. Charge until the LED indicator lights signal a full charge.
3. Power on the speaker by pressing and holding the power button until you hear a confirmation sound.

Bluetooth Pairing

1. Ensure your Bluetooth-enabled device is within range (typically 33 feet/10 meters).
2. Activate Bluetooth on your device and search for available devices.
3. Select "Disney Lilo and Stitch Speaker" from the list of found devices.
4. If prompted for a passcode, enter "0000".
5. Once paired, you can start playing audio from your device through the speaker.

Using the Speaker

1. To play or pause audio, press the play/pause button on the speaker.
2. Adjust the volume by pressing the volume up/down buttons.
3. To answer an incoming call, press the play/pause button. To reject a call, press and hold the same button.
4. To use the FM radio function, press the mode button until you reach the FM radio mode, and use the play/pause button to scan for stations.
5. To play music from an SD card, insert the card into the SD slot and press the mode button to switch to SD card playback.

Troubleshooting Tips

• No Sound: Ensure your speaker is charged, powered on, and properly paired with your device. Adjust the volume on both the speaker and your device.
• Unable to Pair: Make sure the speaker is in pairing mode and that your device’s Bluetooth is on. Keep the devices close together and try pairing again.
• Distorted Sound: Lower the volume on your device and the speaker. Move the speaker away from any potential sources of interference.
• Speaker Not Charging: Check the USB cable and power source for any issues. Try a different charging cable or power source if necessary.

FAQ

What is the battery life of the speaker?

The speaker has a playtime of up to 3 hours on a full charge.

Can I use this speaker near water?

Yes, the speaker has an IPX4 water resistance rating, meaning it is splashproof. However, it should not be submerged in water.

How do I know when the speaker is fully charged?

The LED indicator lights will show the charging status. When the lights stop blinking, the speaker is fully charged.

Is the speaker compatible with all Bluetooth devices?

The speaker is compatible with most Bluetooth-enabled devices, including cell phones, tablets, smartwatches, computers, and laptops.

Can I use the speaker to answer phone calls?

Yes, the speaker has a built-in microphone that allows you to answer or reject incoming calls.

What should I do if the speaker's sound is not clear?

Ensure the speaker is not near any objects that could interfere with the signal. Also, try lowering the volume or moving the speaker to a different location.

How can I attach the speaker to my bag?

The speaker has a built-in silicone loop that can be used to attach it to your bag or backpack.

What is included in the box?

The box includes the Bluetooth Speaker, USB Charging Cable, Backup AUX Cable, and Owner’s Manual.

Where can I find the speaker's controls?

The controls are located on the speaker itself and can be used to play/pause music, adjust volume, switch modes, and answer calls.

What is the weight and size of the speaker?

The speaker weighs 8 ounces and measures 3 x 3 x 6 inches, making it lightweight and portable.

How do I switch between Bluetooth and FM radio modes?

Press the mode button on the speaker to cycle between the different input options until you reach your desired mode.

What should I do if I'm experiencing issues with the speaker?

Refer to the troubleshooting tips provided in this manual. If problems persist, contact the manufacturer or seller for further assistance.

Q: What is the size and weight of the Disney Lilo and Stitch Bluetooth Speaker?
A: The speaker measures 3 x 3 x 6 inches and weighs 8 ounces.

Q: Is the Disney Lilo and Stitch Bluetooth Speaker waterproof?
A: Yes, it has an IPX4 water resistance rating, making it splashproof.

Q: What are the features of this Bluetooth speaker?
A: The Disney Lilo and Stitch Bluetooth speaker has a rechargeable battery, button controls, USB and memory card slots, 3 hours of playtime, and the ability to answer/reject incoming calls and adjust the volume.

Q: Can I connect this speaker to my devices via Bluetooth?
A: Yes, this speaker is designed to be compatible with all Bluetooth-enabled devices such as cell phones, tablets, smartwatches, computers, and laptops.

Q: Is the Disney Lilo and Stitch Bluetooth Speaker portable?
A: Yes, it is lightweight and portable, measuring just 6 inches tall and 3 inches across. It also has a silicone built-in loop for easy attachment to bags or backpacks.

Q: What is included in the package?
A: The package includes the Disney Lilo and Stitch Bluetooth Speaker, a backup AUX cable, a USB charging cable, and an owner's manual.

Q: What is the power source for this speaker?
A: The Disney Lilo and Stitch Bluetooth Speaker is battery-powered.

Q: Does this speaker have any special features?
A: Yes, it has LED indicator lights and a built-in microphone.

Q: Is there any warranty for this product?
A: The product does not mention any specific warranty information. Please check with the seller or manufacturer for warranty details.

Q: Where is this product manufactured?
A: This product is manufactured in China.