ANJANK Wooden Alarm Clock Radio User Manual

Getting Started

• Place the ANJANK alarm clock on a stable, flat surface near your bedside or desk.
• Connect the clock to a power source using the included power cord.
• Once powered on, the clock will display the time. If it's the first time you're using it, set the time manually or connect your Bluetooth device to auto-sync the time.

Setting the Time Manually

1. Press and hold the 'Time Set' button until the hour digits flash.
2. Use the '+' or '-' buttons to adjust the hour, and press the 'Time Set' button again to confirm.
3. The minute digits will flash. Repeat the process to set the minutes.
4. Press the 'Time Set' button once more to exit the time-setting mode.

Bluetooth Pairing

1. Enable Bluetooth on your device.
2. Press the 'Bluetooth' button on the clock to enter pairing mode.
3. Select 'ANJANK Clock' from the list of available devices on your phone or tablet.
4. Once connected, the clock will sync the time from your device.

Wireless Charging

• Place your compatible smartphone on top of the clock, aligning it with the wireless charging symbol.
• The phone should start charging automatically. If not, adjust the position of the phone until charging begins.

Setting Alarms

1. Press the 'Alarm 1' or 'Alarm 2' button to set each alarm individually.
2. Adjust the alarm time using the '+' or '-' buttons, and press the 'Alarm' button again to confirm.
3. To activate or deactivate the alarm, press the corresponding 'Alarm 1' or 'Alarm 2' button briefly.

Adjusting Brightness

• Use the dimmer dial to adjust the LED display brightness from 0 to 100%.
• Turn the dial to the left to decrease brightness and to the right to increase it.

Listening to FM Radio

1. Press the 'Radio' button to turn on the FM radio.
2. Press and hold the 'Radio' button to start auto-scanning for stations.
3. To manually tune to a station, use the '+' or '-' buttons.
4. Adjust the volume using the volume control dial.

Troubleshooting Tips

• Bluetooth Not Connecting: Ensure your device's Bluetooth is on and in range. Try forgetting the ANJANK Clock in your device's Bluetooth settings and re-pairing.
• Wireless Charging Not Working: Confirm that your phone is compatible with wireless charging and properly aligned on the charging pad. Remove any thick phone cases that may interfere with charging.
• Radio Reception Poor: Adjust the position of the clock for better reception or move it closer to a window.
• Alarm Not Sounding: Check that the alarm is set to 'ON' and the volume is appropriately adjusted.
• Display Too Bright or Dim: Use the dimmer dial to adjust the LED display brightness to your preference.

Frequently Asked Questions (FAQs)

Can I program the alarm to go off on specific days of the week?

No, the ANJANK alarm clock does not have a 7-day programming feature. You will need to manually turn the alarm on or off for weekends or specific days.

How do I adjust the volume of the alarm?

The alarm volume can be adjusted using the volume control dial. Please note that the alarm sound will start softly and gradually increase to gently wake you up.

Does the clock save the preset radio stations if it's unplugged?

The clock has a memory function that should retain your preset stations even if it's unplugged. However, it's always a good idea to check and re-save your presets after a power outage.

Can I turn off the LED display completely?

Yes, you can use the dimmer dial to reduce the display brightness to 0%, effectively turning off the display while still using the other functions of the clock.

Is there a snooze function?

Yes, the ANJANK alarm clock features a snooze function. Simply press the 'Snooze' button when the alarm sounds to temporarily deactivate it. The alarm will sound again after a few minutes.

What should I do if the clock is not responding?

If the clock is unresponsive, try unplugging it for a few minutes and then plugging it back in. If issues persist, consult the user manual or contact customer support for assistance.

FAQ [continued]

**ANJANK Wooden Alarm Clock Radio with Bluetooth Speaker FAQ**

**1. What are the main features of the ANJANK Wooden Alarm Clock Radio?**
The ANJANK Wooden Alarm Clock Radio is a 4-in-1 device that functions as an alarm clock, wireless charger, FM radio, and Bluetooth speaker. It features a modern and stylish wooden and fabric finish.

**2. What type of Bluetooth does the clock speaker have?**
The clock speaker is equipped with Bluetooth 5.0, providing a fast and stable connection for wireless streaming of high-quality audio up to 10 meters away. It can also sync with your phone time automatically.

**3. Which devices are compatible with the wireless charging feature?**
The wireless charger supports 5W, 7.5W, and 10W charging and is compatible with various iPhone models (from iPhone 8 to iPhone 14 series) and Samsung Galaxy smartphones.

**4. How many radio stations can the clock store, and what is the frequency range?**
The clock can auto-scan and store up to 35 FM radio stations within the frequency range of 87.5-108MHz. Additionally, it offers a sleep timer option ranging from 10 to 120 minutes.

**5. Does the clock support dual alarms?**
Yes, the clock features dual alarms which allow you to set different wake-up times or reminders. The alarm sound gradually increases to wake you up gently.

**6. Can I adjust the brightness of the digital LED display?**
Yes, you can adjust the brightness of the 1.4" digital LED display from 0% to 100% according to your preference for comfortable viewing or sleeping.

**7. What power source does the clock use?**
The clock is powered by a corded electric source for reliable performance.

**8. In what rooms can I use this clock?**
This versatile clock is suitable for use in bedrooms, living rooms, kitchens, and offices due to its modern design and functionality.

Feel free to reach out if you have any more questions or need further assistance!

Specifications

Brand	ANJANK
Category	Home & Kitchen > Home Décor Products > Clocks > Alarm Clocks
Color	White
Display Type	Digital
Style	Modern
Special Feature	Snooze, Adjustable Brightness, Radio, Adjustable Volume, Charging Station
Product Dimensions	6.7"W x 3.4"H
Power Source	Corded Electric
Age Range (Description)	Adult
Room Type	Bedroom, Living Room, Kitchen and Office
Shape	Rectangular
Dimensions	6.7"W x 3.4"H