Corsair XENEON Dual Arm Stand - Black (CM-8900006) User Manual

The CORSAIR XENEON Dual Arm Stand is designed to enhance your workspace ergonomics and productivity by providing a flexible and space-saving solution for dual monitor setups. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new monitor stand.

Box Contents

Before you begin, please ensure all the following components are present in your box:

• VESA Mount
• Base Mount for Dual Arm
• Gas Spring Arm
• Non-Gas Arm
• Assembly Tool and Accessory
• Quick Start Guide (QSG)

Setup and Installation

Optimizing your desk space with the CORSAIR Dual Arm Stand involves a straightforward installation process. While a detailed step-by-step guide is typically provided in the Quick Start Guide (QSG) included in your box, here's a general overview:

1. Attach the Base Mount: Securely attach the Base Mount for Dual Arm to your desk. Most desk mounts use a clamp system; ensure it's tightened firmly to prevent wobbling.
2. Install the Arms: Insert the Gas Spring Arm and the Non-Gas Arm into the designated slots on the Base Mount.
3. Attach VESA Mounts to Monitors: Attach the VESA Mounts to the back of your monitors. The stand supports VESA 75/100mm mounting patterns. Ensure the screws are tightened securely.
4. Mount Monitors to Arms: Carefully attach your monitors (with the VESA mounts already attached) to the ends of the Gas Spring Arm and Non-Gas Arm. You may need assistance for this step, especially with larger monitors.
5. Cable Management: Utilize any integrated cable management features on the stand to route your monitor cables neatly, reducing clutter and improving the aesthetic of your workspace.

Compatible CORSAIR XENEON Gaming Monitors:

• 32UHD144
• 32QHD240
• 32QHD165
• 27QHD240

Operation and Adjustments

The CORSAIR XENEON Dual Arm Stand offers exceptional flexibility to position your monitors exactly how you want them. Each arm can hold up to 9 kg (19.8 lbs).

• Height Adjustment: The stand offers a lifting range from a maximum height of 466.9mm (18.38”) to a minimum of 187mm (7.36”). The Gas Spring Arm allows for smooth and effortless vertical adjustments.
• Tilt Adjustment: Adjust the tilt of your monitors from -35° to +90° to find the perfect viewing angle and reduce glare.
• Rotation: Rotate your monitors ±128° for portrait or landscape orientation, depending on your workflow.
• Swivel: Enjoy a full 360° swivel capability, allowing you to easily share your screen with others or adjust your viewing position.

Tips for Adjustment:

• For optimal ergonomics, position the top of your monitor screen at or slightly below eye level.
• Ensure your monitors are at an arm's length distance from your eyes.
• Experiment with different tilt and rotation settings to find what is most comfortable for your specific tasks.

Maintenance

To ensure the longevity and optimal performance of your CORSAIR XENEON Dual Arm Stand, follow these simple maintenance guidelines:

• Cleaning: Wipe down the stand with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
• Check Connections: Periodically check that all screws and mounting clamps are securely tightened. Over time, vibrations or frequent adjustments can cause them to loosen slightly.
• Gas Spring Arm: The gas spring mechanism is designed for durability. If you notice any significant change in its performance (e.g., difficulty holding position), refer to the troubleshooting section or contact customer support.

Troubleshooting

Monitors are not holding position or are sagging.

• Check Weight: Ensure that the weight of your monitors does not exceed the maximum capacity of 9 kg (19.8 lbs) per arm.
• Adjust Gas Spring Tension: The Gas Spring Arm has an adjustable tension mechanism. Use the provided assembly tool to increase the tension if the arm is sagging. Refer to your Quick Start Guide for specific instructions on adjusting the gas spring.
• Tighten VESA Mount Screws: Ensure the screws attaching the VESA mount to your monitor are tight.

Stand feels unstable or wobbly.

• Secure Base Mount: Double-check that the Base Mount is securely clamped to your desk. Tighten the clamp firmly.
• Even Weight Distribution: While each arm is independent, ensure that the weight of your monitors is reasonably balanced if possible, especially if one monitor is significantly heavier than the other.

Difficulty adjusting tilt or rotation.

• Loosen Adjustment Screws: Some adjustment points may have screws that need to be slightly loosened before adjustment and then re-tightened to secure the position. Refer to your Quick Start Guide for details on specific adjustment points.

Frequently Asked Questions (FAQ)

What is the maximum weight capacity per arm?

Each arm of the CORSAIR XENEON Dual Arm Stand can hold up to 9 kg (19.8 lbs).

What VESA mounting patterns are supported?

The stand supports VESA 75/100mm mounting patterns.

Can I use this stand with monitors that are not CORSAIR XENEON?

Yes, as long as your monitors adhere to the VESA 75/100mm mounting pattern and do not exceed the 9 kg (19.8 lbs) weight limit per arm, they should be compatible.

How do I adjust the height of the monitors?

The Gas Spring Arm allows for easy vertical adjustment. Simply push or pull the monitor to the desired height. If it's too stiff or too loose, you may need to adjust the gas spring tension using the provided tool.

Does this stand save desk space?

Yes, a key feature of this dual arm stand is its ability to free up valuable desk space by eliminating the need for individual monitor stands.

What is the warranty for this product?

The CORSAIR XENEON Dual Arm Stand comes with a 3-year manufacturer's warranty.

For further assistance or detailed instructions, please refer to the Quick Start Guide included in your product box or visit the official Corsair support website.

Frequently Asked Questions about the Corsair XENEON Dual Arm Stand