User Manual - Fashome Ultrasonic Jewelry Cleaner Model HCU01A

Getting Started

Thank you for choosing the Fashome Ultrasonic Jewelry Cleaner. Before using your device, please read the following instructions carefully to ensure optimal performance and safety.

Initial Setup

1. Place the cleaner on a flat, stable surface.
2. Open the lid of the cleaner and fill the stainless steel tank with water, ensuring the water level does not exceed the MAX mark.
3. (Optional) Add a small amount of liquid hand/dish soap for enhanced cleaning.
4. Place your items to be cleaned into the tank, using the basket or watch stand if necessary.
5. Connect the power cord to the cleaner and plug it into an appropriate power outlet.

Operating Instructions

1. Press the power button to turn on the device.
2. Select the desired power setting (P1, P2, or P3) for your items.
3. Choose a cleaning cycle by pressing the timer button (90, 180, 280, 380, or 480 seconds).
4. Press the start button to initiate the cleaning process. The blue LED lights will illuminate, and the timer will countdown on the digital display.
5. Once the cycle is complete, the device will automatically shut off. Carefully remove and dry your items.

Cleaning and Maintenance

1. Always unplug the device before cleaning.
2. Empty the tank and wipe it with a soft, damp cloth. Do not use abrasive cleaners or brushes.
3. Ensure the device is completely dry before storing it.

Troubleshooting Tips

If you encounter issues with your ultrasonic cleaner, please refer to the following tips:

• Device Won't Start: Ensure the power cord is securely connected and the outlet is functioning.
• Poor Cleaning Results: Check if the water level is appropriate, the correct power setting is selected, and if additional cleaning solution is needed.
• Excessive Noise: Verify that the cleaner is on a stable surface and that the items are not touching the tank walls.
• Device Shuts Off Prematurely: Inspect for any obstructions or excessive foam which may cause the device to stop.

Frequently Asked Questions (FAQs)

Can I use tap water for cleaning?

Yes, tap water is suitable for use in the ultrasonic cleaner. For enhanced cleaning, you may add a small amount of liquid hand/dish soap.

What items can I clean with this device?

The Fashome Ultrasonic Cleaner is suitable for a wide range of items including jewelry, eyeglasses, coins, watch bands, retainers, dentures, and more.

Is it safe for all types of jewelry?

Most common types of jewelry can be safely cleaned. However, some delicate items or stones may require special care. When in doubt, consult a professional jeweler.

How often should I clean the tank?

Clean the tank after each use to prevent residue buildup and ensure optimal performance.

What is the warranty period for this cleaner?

The Fashome Ultrasonic Jewelry Cleaner comes with a customer service guarantee. For specific warranty information, please refer to the included instructions or contact customer service.