ELEGOO Mars 5 Ultra 9K Resin 3D Printer User Manual

Getting Started

1. Unpacking: Carefully remove the printer from its packaging, ensuring all components are accounted for.
2. Assembly: Place the printer on a stable, level surface. Attach any components as outlined in the setup guide (if necessary).
3. Power On: Connect the printer to a power source and switch it on using the power button.

Initial Setup

1. Automatic Leveling: Follow the on-screen prompts to initiate the automatic bed leveling process.
2. Load Resin: Pour resin into the vat, ensuring not to overfill. Use the provided spout for a cleaner pour.
3. Connect to Wi-Fi: Access the printer's settings to connect it to your local Wi-Fi network for wireless printing capabilities.

Printing Your First Object

1. Prepare 3D Model: Use the included Chitubox Pro subscription to slice your 3D model and save the file to a USB drive or send it via Wi-Fi.
2. Start Printing: Select the prepared file on the printer's interface and begin the printing process.
3. Monitor Print: Use the built-in AI camera to remotely monitor the printing process and make adjustments as needed.

Maintenance

1. Cleaning: After each print, clean the vat and build plate with isopropyl alcohol to remove any residual resin.
2. FEP Film: Check the FEP film for any signs of wear or damage and replace if necessary.
3. Software Updates: Keep your printer's firmware and software up to date for optimal performance.

Troubleshooting Tips

• Failed Prints: Check the resin levels, ensure the build plate is clean, and verify the slicing settings are correct for the resin type.
• Resin Curing Issues: Adjust the UV exposure settings if the resin is not curing properly or if the prints are not adhering to the build plate.
• Network Connectivity: If Wi-Fi transfer is not working, check your network settings or try using a USB drive to transfer files.
• FEP Film Damage: If the FEP film is damaged, replace it following the instructions in the maintenance section of this manual.

Frequently Asked Questions (FAQ)

What should I do if my print is failing to adhere to the build plate?

Ensure the build plate is clean and free of debris. Adjust the base layer exposure time to increase adhesion. Check if the build plate is properly leveled, even though the machine has automatic leveling, it may require recalibration over time.

How can I prevent the FEP film from failing?

Avoid printing objects with large, flat surfaces directly on the FEP film. Ensure the correct resin settings are used, and if a print fails, clean the vat thoroughly before attempting another print.

Can I use third-party resins with this printer?

Yes, the ELEGOO Mars 5 Ultra 9K is compatible with most 405nm UV-curable resins. However, always check the resin manufacturer's recommended settings for best results.

How do I update the printer's firmware?

Download the latest firmware from the ELEGOO website and follow the included instructions to update your printer.

What should I do if the AI camera's view is blocked?

Arrange your prints strategically to avoid blocking the camera's view. Consider the positioning and size of your models before starting a print job.