AsperX 2000A Car Jump Starter with LED Light
AsperX Car Jump Starter User Manual
Instructions for Use
Thank you for choosing the AsperX Car Jump Starter. Please
follow these instructions to safely use your device:
- Before using, ensure that the jump starter is charged above
50%. The LCD display will show the remaining battery life.
- Turn off all electronics in the vehicle and ensure the ignition
is in the OFF position.
- Connect the red clamp to the positive (+) battery terminal and
the black clamp to the negative (-) battery terminal.
- Make sure the connections are secure, and check the indicator
on the jump starter. A solid green light indicates a correct
connection, while a flashing red light indicates a reversed
connection.
- If the connection is correct, press the BOOST button on the
jump starter.
- Attempt to start the vehicle. If it doesn’t start within 5
seconds, wait for at least 30 seconds before trying again.
- Once the vehicle starts, carefully disconnect the clamps
starting with the black clamp, followed by the red clamp.
- Recharge the jump starter as soon as possible after use.
Troubleshooting Tips
If you encounter issues with your AsperX Car Jump Starter, here
are some tips to help you resolve them:
- If the jump starter fails to start the vehicle, ensure the
clamps have a solid connection to the battery terminals and that
the battery is not beyond its service life.
- If the indicator shows a flashing red light, check the polarity
of your connections and adjust them accordingly.
- In cold weather, warm up the battery booster by keeping it
inside the vehicle for a few minutes before use.
- If the jump starter is not charging, check the charging cable
and the power source for any issues.
- Should the device overheat, allow it to cool down before
attempting to use or charge it.
Frequently Asked Questions (FAQ)
- Q: Can the AsperX Car Jump Starter be used on all
vehicles?
- A: The jump starter is suitable for vehicles with up to 8.0L
gas or 6.5L diesel engines, including cars, trucks, motorcycles,
boats, RVs, or tractors.
- Q: How often should I charge the jump starter?
- A: It is recommended to charge the jump starter every 2-3
months when not in use. Always ensure it is charged above 50%
before attempting to start a vehicle.
- Q: What does the LED light indicate?
- A: The LED light has three modes: steady light for
illumination, flashing for attention, and SOS for emergencies.
Change modes by pressing the power button.
- Q: What safety features does the jump starter have?
- A: The device includes spark-proof technology, reverse polarity
protection, low/high-temperature protection, and over-load
protection for safe operation.
- Q: How do I know if the jump starter is connected
correctly?
- A: The indicator light will show a solid green light when
correctly connected. A flashing red light indicates an incorrect
connection.
- Q: Can the AsperX Car Jump Starter charge other devices?
- A: Yes, it can function as a power bank with its USB port to
charge devices like cell phones, tablets, and cameras.
FAQ [continued]
**AsperX Car Jump Starter Product FAQ:**
**Q: What type of vehicles is the AsperX Car Jump Starter suitable
for?**
A: The AsperX Car Jump Starter is suitable for cars, trucks,
motorcycles, boats, RVs, tractors, and more with gas engines up to
8.0L or diesel engines up to 6.5L.
**Q: What are the safety features of the AsperX Car Jump
Starter?**
A: The jump starter has comprehensive safety protections including
spark-proof design, reverse polarity protection, low-temperature
protection, high-temperature protection, and over-load protection
for safe and easy use.
**Q: Can the AsperX Car Jump Starter be used as a power bank?**
A: Yes, the jump starter can also be used as a portable emergency
power bank to charge devices such as cell phones, tablets, Kindles,
or digital cameras via its quick-charge USB port.
**Q: How do I know the remaining power of the jump starter?**
A: The jump starter is equipped with a 1.4" LCD display that shows
the usage status and remaining power clearly so you can easily
monitor the battery level.
**Q: What temperature range does the AsperX Car Jump Starter work
in?**
A: The jump starter can operate in a working environment
temperature range of -20℃ to 60℃ (-4℉ to 140℉), making it suitable
for use in various climates and conditions.
**Q: How often should I charge the AsperX Car Jump Starter if not
in use?**
A: It is recommended to charge the portable jump starter every 2-3
months if not in use to keep it in a healthy state and ensure it is
ready when needed.
**Q: Is the AsperX Car Jump Starter easy to use?**
A: Yes, the jump starter is designed for easy use with clear
instructions. Simply connect the clamps to your battery (red to
red, black to black), press the BOOST button once properly
connected, and start your vehicle.
**Q: What warranty and support does the AsperX Car Jump Starter
come with?**
A: The product includes 2 years of product quality support and
24-hour customer service to assist you with any questions or issues
you may have.
Please note that these FAQs are based on information provided about
the AsperX Car Jump Starter and aim to address common queries users
may have about this product.
Specifications
Brand | AsperX |
Manufacturer | AsperX |
Category | Automotive > Tools & Equipment > Jump Starters |
Battery cell composition | Lithium Polymer |
Voltage | 12 Volts |
Vehicle service type | Motorcycle |
Battery capacity | 10000 Milliamp Hours |
Customer Reviews | 4.5 4.5 out of 5 stars 1,845 ratings 4.5 out of 5 stars |
Best Sellers Rank | #41 in Automotive (See Top 100 in Automotive) #4 in Jump Starters |
mfr-part-number | AsperX |
ASIN | B0DJ26X1QB |
Brand Name | AsperX |
Amperage | 2000 Amps |
Battery Type | Lithium Polymer |
Battery Capacity | 10000 Milliamp Hours |
Compatible with Vehicle Type | Motorcycle |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.